Important Please Read!
Just finished a broad check of different transformer that come with different machines and the ones built inside (100v systems like Harley Davidson, Spin Luck, Addams Family, Beast Sapp to name a few)
Those transformer that are 100v input and 24v out put. These put out 30.43v to 30.44v when plugged into 120v systems of this country.
Machines like Beast Sapp that is 100v, you just plug it in. inside the system it is putting out from 30.43v to 30.44v. This is the reason the LEDS are burning out so quick.
If you are running a Pachinko or Pachislot with a transformer made for operation in Japan, you need to change that Transformer to an American made 120v input with an 24v out put as soon as you can.
The machines are only rated to vary 10% above the 24v.
On the pachislot machines (100v systems) I am not sure if there is a transformer that takes 120v input and 100v output to run them correctly.
I checked my incoming voltage and it was during all test 120.07v to 12.09v.
So this is a problem we should be addressing, I think.
Power Volt, Inc. a smt-6-24-rtc (RTC: Auto-resetable thermal cut-out)
These are designed to run 27/7, they are 120v input and 24v output. But I am sure there are others. Milt at Stealth Home Amusement 888-798-1761 (Toll-Free) carries and uses them.
"This is My Personal Opinion and no others"
Reply With Quote
