1ST Modern Pachinko. Sankyo Stellar 2000 fever

[Forex]

this one needed some work. had to totally disassemble it and clean every part found a lot of stuff in it paper clips leafs dirt water stains hair.had to repair the ball guide. also it had about 140 ball that wasn't pachinko ball much bigger then the engraved balls.put about 8hr of work in to it and it WORKS!. Don't know much about the machine it looks vintage for a modern machine with the wooden frame






IMG_4325.jpg04.jpg2.jpg3.JPG

[Moparformances]

Plenty new enought to not be a Vintage... but old enougth to not use a dongle... either way a nice looking machine

[owennewton]

very cool, I love machines from this time in the evolution of pachinko

[compirate]

フィーバーキングⅡ

Fever King II

10/1992

フィーãƒ�ーã‚*ングII - Wikipedia

http://www.youtube.com/watch?v=AqHtWmtlu60

[Drunkenclam]

The master again

[yose]

nice looking machine, that is a great looking transition period to the today moderns.

[ACMech]

Nice machine! Congrats on getting it working again!!!

[zman81]

I recently got one of these, and until now, I didn't know what it was called. Do you have an manuals on this guy. Also, did you find a reset switch? Thanks.

[Maxmaxwell]

Hello All, have same machine. Exactly the same machine. Just p/u tonight. First thanks for the open door and Hello. Is there any info available for this machine at all? Or is it hit and miss? I have 500 used balls coming from flea bay, so before I even see if it runs right is the anything on lights, sequence of lights? I need a door key so any idea what year and/ or where a key can be found? I have barrel keys for my slots but not a flat key. Seems the machine is so heavy in the oak wood cabinet I will have to anchor the case to open the door to service. Can I adapt an auto loader to this unit? Can I find odds of payout? Can I win the lottery anytime soon or should I try to get struck by lightning first, Ahh serious questions for the inquiring mind.....thanks again learned a lot just reading already!!

[Moparformances]

Hello All, have same machine. Exactly the same machine. Just p/u tonight. First thanks for the open door and Hello. Is there any info available for this machine at all? Or is it hit and miss? I have 500 used balls coming from flea bay, so before I even see if it runs right is the anything on lights, sequence of lights? I need a door key so any idea what year and/ or where a key can be found? I have barrel keys for my slots but not a flat key. Seems the machine is so heavy in the oak wood cabinet I will have to anchor the case to open the door to service. Can I adapt an auto loader to this unit? Can I find odds of payout? Can I win the lottery anytime soon or should I try to get struck by lightning first, Ahh serious questions for the inquiring mind.....thanks again learned a lot just reading already!!

odds can not be adjusted.. the nails can be tweeked to increase or decrease payouts.. a key is not required. finding one will be hard.. taking the lock out and taking it to a smith may work..

feel free to ask questions

and of course

Welcome to Pachitalk

[Peteybob]

Hello Maxmaxwell and welcome to the group

If your lock uses a master flat key then I may have a freebie for you. Post a close up of the lock if you'd like.

[Maxmaxwell]

Hello Maxmaxwell and welcome to the group

If your lock uses a master flat key then I may have a freebie for you. Post a close up of the lock if you'd like.

Sure here is a couple pics, not real good. Tried to snag an older model just for the balls today but was sold before I could buy so I have to wait on balls. I need a key my skil stops have barrel keys on spring straps. IMG_20210124_142748_6.jpgIMG_20210124_142801_2.jpg Thanks

[Peteybob]

Thanks for the pic. Sorry to say I do not have that key.

[Maxmaxwell]

Thanks for trying, I will need a good supply house that has parts in case I need any and I still haven't seen any type of programming booklet for this. My Slots, they both have adjustments which allow me to change a few things, one allows diagnostics. If any of you know who may have anything related to this model please advise, For the key, Yes it is needed. I wanted to try and keep it as close to original as possible, being a FORD lover, we love originality. LOL

[takethecastle57]

Hello All, have same machine. Exactly the same machine. Just p/u tonight. First thanks for the open door and Hello. Is there any info available for this machine at all? Or is it hit and miss? I have 500 used balls coming from flea bay, so before I even see if it runs right is the anything on lights, sequence of lights? I need a door key so any idea what year and/ or where a key can be found? I have barrel keys for my slots but not a flat key. Seems the machine is so heavy in the oak wood cabinet I will have to anchor the case to open the door to service. Can I adapt an auto loader to this unit? Can I find odds of payout? Can I win the lottery anytime soon or should I try to get struck by lightning first, Ahh serious questions for the inquiring mind.....thanks again learned a lot just reading already!!

[MrGneiss]

WELCOME!!!

[Maxmaxwell]

Okay hellllp!!!! This Pachinko Fever I have, runs like a Olympic sprinter. I love the action, lights, and operation. Back in the 70's I was given a Pachinko with the old hand shot and we had a blast with it. BUTTTTTT my Pachinko masters, I have always had an issue with the ball capture in the rear of machine, there is am immediate step down off the machine to the oak case it sits in, easily enough fixed BUT the balls still bounce like the Harlem globetrotters practicing for the Olympics. My intention if you look at my pics it to mount the frame close to the wall so I will use the front access. (not the glass) to svc machine and round up foul balls. Can one of ya or maybe a dozen, post a pic of your custom hand made and blessed by the Pachinko gods your ball catchers, and no you can't post pics of your girlfriends that is NOT allowed here. LOL Paaaaahhhhllllease???? I can always use duct tape and cardboard but something looking more professional in line with the mechanics of the machine is what we are seeking, Hey thanks red423

[Maxmaxwell]

Ok I made huge mistake, here is picture of my cabinet and frame. I know a few of you have the same type how do you handle balls in rear of machine???IMG_20210131_100735_4 (1).jpg

[Moparformances]

Ok I made huge mistake, here is picture of my cabinet and frame. I know a few of you have the same type how do you handle balls in rear of machine???IMG_20210131_100735_4 (1).jpg

i have use plastic bins like in your picture.. bigger the better..

a home made cloth tube from the balls exit points will slow there fall and restrict bounce... Or a piece of foam / rubber /mouse pad liner will help soften bounce..

i have also made my own wooden boxes as well so i can get the right width and depth.. the options are endless

[Peteybob]

I have some larger padded trays that work well with my few that are in cabinets. Slide them out to dump and slide them right back in.

20210131_162233.jpg

I also have collection bins fitted with cardboard and ball trays fitted with vinyl dinner place mats. Both stop the bounce and reduce the noise level a lot.

20210131_162402.jpg

Still working on the getting pics from phone to work on this site. No matter how I edit things they are still off by 180 degrees LOL! Back to the laptop for me I guess.