B4B22BF2-58CE-4ED2-BADF-1EEAB447ACCA.jpgB4B22BF2-58CE-4ED2-BADF-1EEAB447ACCA.jpgI have a modern pachinko CR Gantz that is very heavy and I need a way to make a stand for it. What would be the best way? Thanks!
How to make a stand for a modern pachinko machine
B4B22BF2-58CE-4ED2-BADF-1EEAB447ACCA.jpgB4B22BF2-58CE-4ED2-BADF-1EEAB447ACCA.jpgI have a modern pachinko CR Gantz that is very heavy and I need a way to make a stand for it. What would be the best way? Thanks!
Re: How to make a stand for a modern pachinko machine
The most basic thing to do would be feet.. Just two 1x4s under the machine would work fine for vintage and moderns up until a few years ago.. I know moderns have gotten a lot bigger lately so that may or may not work.. two boards mounted one on each side is anther basic way to go.. For other full cabinet ideas, make sure to look through the cabinet forum!!
https://www.pachitalk.com/forums/for...hinko-Cabinets
"Blowing smoke rings at the moon."
How to make a stand for a modern pachinko machine
I like to make my “feet” with 3 boards, instead of 2, makes them sturdier; more rigid and also serves as a ball catcher tray shelf.
Or go all out and build a nice cabinet with an extra hopper.
Re: How to make a stand for a modern pachinko machine
Never Doubt that a small group of thoughtful, .......... /........ If your not going to stand behind our troops
...committed people can change the world. ............. /.................Please, Please stand in front of them
.....Indeed, it is the only thing that ever has............./
.........................................Margaret Mead
Posting Permissions
Reply With Quote
