Results 1 to 20 of 20

Thread: need a nishijin model "A" part real bad

  1. #1
    Tokie Owens joodyallison's Avatar
    Join Date
    Mar 2022
    Location
    Virginia
    Posts
    11
    Thanks
    8
    Thanks Received
    9

    Default need a nishijin model "A" part real bad

    hello all,
    i do vintage machine restorations and i have hit a wall. of the hundreds and hundreds of spare parts i hae i do not have this one. i need it bad to finish a job. it is the payout tray from a model a nishijin. the part i have has a broken tab that is soldered on the upper left side of the part. this piece prevents balls from entering the slots until it has paid out and returns to the proper position.

  2. #2
    Tokie Owens joodyallison's Avatar
    Join Date
    Mar 2022
    Location
    Virginia
    Posts
    11
    Thanks
    8
    Thanks Received
    9

    Default Re: need a nishijin model "A" part real bad

    here is a pic of the part i am looking for. note the broken solder joints on the payout tray. i need this whole tray part
    Attached Images Attached Images

  3. #3
    Pachi Puro Moparformances's Avatar
    Join Date
    Jan 2009
    Location
    Diamond Springs CA
    Posts
    14,076
    Thanks
    26,525
    Thanks Received
    12,096

    Default Re: need a nishijin model "A" part real bad

    can you post a bigger pic of the machine.. i may have a parts machine
    Never Doubt that a small group of thoughtful, .......... /........ If your not going to stand behind our troops
    ...committed people can change the world. ............. /.................Please, Please stand in front of them
    .....Indeed, it is the only thing that ever has............./
    .........................................Margaret Mead

  4. The following user says "Thanks" to Moparformances


  5. #4
    Chicken Fried Steak takethecastle57's Avatar
    Join Date
    Aug 2005
    Location
    Monterey , Ca
    Posts
    21,241
    Thanks
    26,031
    Thanks Received
    11,939

    Default Re: need a nishijin model "A" part real bad

    and a biscuit
    When things don't go right the 1st time , Step back ,Take a break and come back renewed. RGS

  6. #5
    Tokie Owens joodyallison's Avatar
    Join Date
    Mar 2022
    Location
    Virginia
    Posts
    11
    Thanks
    8
    Thanks Received
    9

    Default Re: need a nishijin model "A" part real bad

    here are a few more pics
    Attached Images Attached Images

  7. The following user says "Thanks" to joodyallison


  8. #6
    Chicken Fried Steak takethecastle57's Avatar
    Join Date
    Aug 2005
    Location
    Monterey , Ca
    Posts
    21,241
    Thanks
    26,031
    Thanks Received
    11,939

    Default Re: need a nishijin model "A" part real bad

    Have you looked on eBay for machines with that part ?
    When things don't go right the 1st time , Step back ,Take a break and come back renewed. RGS

  9. #7
    Sandwich Shooter SibSr's Avatar
    Join Date
    Nov 2020
    Location
    Wesley Chapel, Florida
    Posts
    463
    Thanks
    242
    Thanks Received
    1,258

    Default Re: need a nishijin model "A" part real bad

    I have one off a machine I recently stripped. The tray is clear plastic instead of brass.

    Sent from my LG-H872 using Tapatalk

  10. The following 2 users say "Thanks" to SibSr


  11. #8
    Sandwich Shooter machgo's Avatar
    Join Date
    Sep 2017
    Location
    Chicago
    Posts
    253
    Thanks
    318
    Thanks Received
    271

    Default Re: need a nishijin model "A" part real bad

    De-soldering and re-soldering isn't an option? You can polish the metal while you're at it...just a thought.

  12. #9
    Tokie Owens joodyallison's Avatar
    Join Date
    Mar 2022
    Location
    Virginia
    Posts
    11
    Thanks
    8
    Thanks Received
    9

    Default Re: need a nishijin model "A" part real bad

    i dont have the part to solder on it. its missing

  13. #10
    Tokie Owens joodyallison's Avatar
    Join Date
    Mar 2022
    Location
    Virginia
    Posts
    11
    Thanks
    8
    Thanks Received
    9

    Default Re: need a nishijin model "A" part real bad

    its off a nishijin? if so i would like to buy it if possible

  14. #11
    Sandwich Shooter machgo's Avatar
    Join Date
    Sep 2017
    Location
    Chicago
    Posts
    253
    Thanks
    318
    Thanks Received
    271

    Default Re: need a nishijin model "A" part real bad

    My apologies. I apparently don't know what part goes on there, and I don't have access to the only type A that machine I own.

    As someone else said, I would check ebay.
    Last edited by machgo; 03-28-2022 at 04:38 PM.

  15. The following user says "Thanks" to machgo


  16. #12
    Tokie Owens joodyallison's Avatar
    Join Date
    Mar 2022
    Location
    Virginia
    Posts
    11
    Thanks
    8
    Thanks Received
    9

    Default Re: need a nishijin model "A" part real bad

    i constantly look but no luck so far. funny thing i have had dozens of model a machines around over the years and never had to look for parts. now i do. i guess its never supposed to be easy. and i cant really afford to buy a parts machine and have it shipped. just for the one little part.
    guaranteed when i am not looking for this part i will stumble upon a couple model a machines.
    Last edited by joodyallison; 03-28-2022 at 06:10 PM.

  17. #13
    Sandwich Shooter SibSr's Avatar
    Join Date
    Nov 2020
    Location
    Wesley Chapel, Florida
    Posts
    463
    Thanks
    242
    Thanks Received
    1,258

    Default Re: need a nishijin model "A" part real bad

    I sent you a pm on the part. It came off a machine that had been in the rain and had no frame. I paid $10 for it and when I saw termite residue falling out of the disintegrating wood, I stripped it and tossed the backboard. I now have a whole box of model a parts

    Sent from my LG-H872 using Tapatalk

  18. The following user says "Thanks" to SibSr


  19. #14
    Pachi Puro Moparformances's Avatar
    Join Date
    Jan 2009
    Location
    Diamond Springs CA
    Posts
    14,076
    Thanks
    26,525
    Thanks Received
    12,096

    Default Re: need a nishijin model "A" part real bad

    Never Doubt that a small group of thoughtful, .......... /........ If your not going to stand behind our troops
    ...committed people can change the world. ............. /.................Please, Please stand in front of them
    .....Indeed, it is the only thing that ever has............./
    .........................................Margaret Mead

  20. The following 2 users say "Thanks" to Moparformances


  21. #15
    Sandwich Shooter machgo's Avatar
    Join Date
    Sep 2017
    Location
    Chicago
    Posts
    253
    Thanks
    318
    Thanks Received
    271

    Default Re: need a nishijin model "A" part real bad

    I see the piece you need I would get some sheet copper and bend one, but that's me.

  22. #16
    Sandwich Shooter SibSr's Avatar
    Join Date
    Nov 2020
    Location
    Wesley Chapel, Florida
    Posts
    463
    Thanks
    242
    Thanks Received
    1,258

    Default Re: need a nishijin model "A" part real bad

    I'm sending him my part in exchange for his part. I'll engineer a fix and then put it in the box with the rest of my spare model A parts

    Sent from my LG-H872 using Tapatalk

  23. The following 5 users say "Thanks" to SibSr


  24. #17
    Tokie Owens joodyallison's Avatar
    Join Date
    Mar 2022
    Location
    Virginia
    Posts
    11
    Thanks
    8
    Thanks Received
    9

    Default Re: need a nishijin model "A" part real bad

    need this part as well mopar
    Attached Images Attached Images

  25. #18
    Sandwich Shooter SibSr's Avatar
    Join Date
    Nov 2020
    Location
    Wesley Chapel, Florida
    Posts
    463
    Thanks
    242
    Thanks Received
    1,258

    Default Re: need a nishijin model "A" part real bad

    He received my parts, but the plastic tray is not a direct replacement size wise for the copper one. He's going to be doing some pachineering to try to make it work.

    Sent from my LG-H872 using Tapatalk

  26. The following 3 users say "Thanks" to SibSr


  27. #19
    Pachi Puro Moparformances's Avatar
    Join Date
    Jan 2009
    Location
    Diamond Springs CA
    Posts
    14,076
    Thanks
    26,525
    Thanks Received
    12,096

    Default Re: need a nishijin model "A" part real bad

    pachi parts.jpg

    do ya need anything else

    pachi back.jpg
    Never Doubt that a small group of thoughtful, .......... /........ If your not going to stand behind our troops
    ...committed people can change the world. ............. /.................Please, Please stand in front of them
    .....Indeed, it is the only thing that ever has............./
    .........................................Margaret Mead

  28. The following 2 users say "Thanks" to Moparformances


  29. #20
    Tokie Owens joodyallison's Avatar
    Join Date
    Mar 2022
    Location
    Virginia
    Posts
    11
    Thanks
    8
    Thanks Received
    9

    Default Re: need a nishijin model "A" part real bad

    no thats it. actually i do not need the white cover piece you have in the baggie. everything else yes

Similar Threads

  1. Error Code "A." Nishijin Nekketsu Bohkenoh model Y&O
    By Pneuma in forum Modern Pachinko
    Replies: 81
    Last Post: 12-22-2021, 02:59 PM
  2. Replies: 4
    Last Post: 05-23-2017, 12:13 AM
  3. Installing a Gaku Counter on a Model "A" Nishijin Vintage?
    By p.opus in forum Pachinko Modifications
    Replies: 10
    Last Post: 06-12-2013, 10:21 PM
  4. Ebay Auction : Nishijin "Rolling Stone" Model 'B'. Looks like a good price.
    By p.opus in forum eBay - General Auction listings
    Replies: 4
    Last Post: 05-12-2013, 10:39 PM
  5. Nishijin pachinko machine model a "sophia" late 1950's
    By Sid in forum Pachinko Listings / Ebay RSS feed
    Replies: 0
    Last Post: 02-09-2009, 10:40 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •