need help cj code on baltec tatsujin

[sevanlevan]

new to this.ive had this tatsujin in storage and maybe it got bumped around or spmething.it use to work great now i plug it in and cj code comes on and it starts beepscreeching.i turn the keycounter-clockwise and it stops for a few seconds and then starts screeching again.also the lights come on the front of machine but not the reels.plenty of tokens.any help appreciated.

[hanabi]

Hello

Welcome to PachiTalk, CJ may indicate something like Coin Jam?

Not sure if you have tried doing the 'Hard Reset' but this may resolve your issue, if not it's a good place to start with troubleshooting

Here is some info that explains how to reset a pachislo, as part of this process it includes how to change and set the skill level, you must follow all steps carefully

"How To Set the Skill Levels of Your Pachislo
HOW CHANGE ODDS:

"TURN YOUR MACHINE OFF FIRST"

1. Locate internal key switch, and insert key.
Note: In order to change odds, machine must be in idle mode with no tokens/coins or credits being played and off.

2. Turn "reset" key switch to on, to access programming mode.

3. Turn on machine now.

4. Depending on machine type, a number from 1 to 6 will be displayed on one of the LED meters on front door. (please note on some models the numbers could be displayed inside the machine)

5. Locate and push Skill button. Depress button and notice movement of number being displayed in LED meter.

6. Once desired level is displayed (1 to 6), push down on play handle (Joy Stick) for 10 seconds, and depress both "BET CREDITS" and "COLLECT CREDITS" buttons to lock odds level into machine memory.

7. Turn "reset" key back to off.

8. Machine should immediately initialize. If not, turn power switch to the OFF position, wait 15 seconds and turn power switch back to ON position.


Also just to confirm some additional info (from member Chrisdice) regarding hard reset

Two switches on the power supply:
- One requires a soft reset at the end of a bonus.
- The other pays out all tokens at the end of a bonus.

For these switches in most cases off is in the down or right position. The for off and on are:

無 = off

有 = on



Do let us know if this helps or if you require any further advice

[pachiwall]

Better than what I was gonna say! And...TO PACHITALK!

[Moparformances]

Welcome to Pachitalk

[luckydog]

it may be a poor connection somewhere, try reseating your wiring!!