Results 1 to 17 of 17

Thread: Urgent Help Needed

  1. #1
    Tokie Owens F1ADO's Avatar
    Join Date
    Nov 2020
    Location
    Nottingham
    Posts
    16
    Thanks
    0
    Thanks Received
    20

    Default Urgent Help Needed

    I am trying to build a wall of cabinets so that my new Pachinkos will sit flush.

    I had the bright idea (not) of building the start of the sub frame directly on to the wall ( thought it would add stability) but now I'm stuck as to what to do to build it out from the wall.

    Hopefully after sleep, I will have a brain wave but failing that can anyone steer me as to what I should be doing next.

    As you can tell, DIY is defo not my forte.

    Thanks in advance.IMG_20201129_005439.jpg

  2. The following user says "Thanks" to F1ADO


  3. #2
    Pachi Puro Moparformances's Avatar
    Join Date
    Jan 2009
    Location
    Diamond Springs CA
    Posts
    14,099
    Thanks
    26,564
    Thanks Received
    12,141

    Default Re: Urgent Help Needed

    why not take the odd length uprights off, place sheet goods / plywood on the horizontal cleat and create a shelf that is 12 or so inches (30ish centimeters) deep.. with front supports to the floor then doors on the front to hide / storage.

    build stand alone cabinets for each machine so you can move them around as you see fit
    Never Doubt that a small group of thoughtful, .......... /........ If your not going to stand behind our troops
    ...committed people can change the world. ............. /.................Please, Please stand in front of them
    .....Indeed, it is the only thing that ever has............./
    .........................................Margaret Mead

  4. #3
    Tokie Owens F1ADO's Avatar
    Join Date
    Nov 2020
    Location
    Nottingham
    Posts
    16
    Thanks
    0
    Thanks Received
    20

    Default Re: Urgent Help Needed

    Forgot to mention the odd lengths are not fixed, they are there just to represent where the machines will be going.
    I was planning to do 30cms but may have to build it a little bigger as told some of the machines I have are deeper than the standard depth. Thanks will give your suggestion a try

  5. The following user says "Thanks" to F1ADO


  6. #4
    Pachi Puro pachiwall's Avatar
    Join Date
    Oct 2010
    Location
    Dayton, Ohio
    Posts
    3,239
    Thanks
    4,682
    Thanks Received
    4,679

    Default Re: Urgent Help Needed

    Quote Originally Posted by Moparformances View Post
    why not take the odd length uprights off, place sheet goods / plywood on the horizontal cleat and create a shelf that is 12 or so inches (30ish centimeters) deep.. with front supports to the floor then doors on the front to hide / storage.

    build stand alone cabinets for each machine so you can move them around as you see fit
    I thought the vertical wood was fixed as well. I attach a horizontal 2X3 or 2X4 TO THE STUDS usually with 2 1/2" or 3' drywall screws. Then frame out a piece of plywood for a top. (with the one screwed to the wall as the 4th side) Then legs to the floor. For me...I'm typically building a work bench, so ther legs get braced with more 2X4s. But since you are building cabinets, plywood (or other sheeting material) will support the legs and give storage space. In Dayton, Habitat For Humanity has a store that sells all the tear out from old houses. I used to buy oak cabinet doors of assorted sizes for $5 to $10 each. That way I didn't have to learn how to make doors.
    Once your base has been made, you can make individual cabinets, as Mopar suggested. Or, you can make all combined in one enclosure. But a strong base is required, no matter how you decide to do the top. Did you attach to studs? There WILL be a lot of weight on it.

  7. The following user says "Thanks" to pachiwall


  8. #5
    Kungishi Wayne-Ooo's Avatar
    Join Date
    Oct 2011
    Location
    Lebanon, Indiana
    Posts
    1,876
    Thanks
    2,416
    Thanks Received
    5,203

    Default Re: Urgent Help Needed

    I built something similar, maybe you could get some ideas if you check out what I did. https://www.pachislodb.com/viewtopic.php?f=12&t=6163
    What if...​the ​HOKEY POKEY, is what it's all about?

  9. #6
    I was thrown out of Top Gear Drunkenclam's Avatar
    Join Date
    May 2010
    Location
    Guildford, Surrey
    Posts
    29,003
    Thanks
    13,752
    Thanks Received
    19,340

    Default Re: Urgent Help Needed

    This guy needs some Daverob dongles
    My woodwork skills suck. So I brought industrial steel racking. Its floor mounted and rated at 200KG per shelf.

    For my model railway. I did the same batons round the side and then l used shop brought pillars to support the base boards away from the wall. B&Q do a range of different styles and length and weights. With adjustable feet to get the height level.

    Not finished yet. But here you go.

    20201129_115616_resized_1.jpg
    Last edited by Drunkenclam; 11-29-2020 at 01:29 PM.
    Ian #UKPachinko

  10. The following 3 users say "Thanks" to Drunkenclam


  11. #7
    Tokie Owens F1ADO's Avatar
    Join Date
    Nov 2020
    Location
    Nottingham
    Posts
    16
    Thanks
    0
    Thanks Received
    20

    Default Re: Urgent Help Needed

    It's looking really good, I did a bit more work on mine today and there is a plan coming together is

  12. #8
    Tokie Owens F1ADO's Avatar
    Join Date
    Nov 2020
    Location
    Nottingham
    Posts
    16
    Thanks
    0
    Thanks Received
    20

    Default Re: Urgent Help Needed

    Bottom sub frame built now something for the top.IMG_20201130_023210.jpg

  13. The following 3 users say "Thanks" to F1ADO


  14. #9
    Tokie Owens F1ADO's Avatar
    Join Date
    Nov 2020
    Location
    Nottingham
    Posts
    16
    Thanks
    0
    Thanks Received
    20

    Default Re: Urgent Help Needed


  15. The following 4 users say "Thanks" to F1ADO


  16. #10
    Pachi Puro pachiwall's Avatar
    Join Date
    Oct 2010
    Location
    Dayton, Ohio
    Posts
    3,239
    Thanks
    4,682
    Thanks Received
    4,679

    Default Re: Urgent Help Needed

    Very nice start! I once made a tank stand for a 75 gallon fish tank. I made it with 3/4" oak boards. It was so heavy and expensive! If I were to do it again. I would have used "oak plywood. It is a thin sheet of "good 1 side" plywood, with oak veneer on the good side. Cutsand fits like plywood...finishes like beautiful oak! Add nice trim work...and it looks like fine furniture! Costs a bit more than regular plywood, but costs WAY less than real oak boards.

  17. #11
    I was thrown out of Top Gear Drunkenclam's Avatar
    Join Date
    May 2010
    Location
    Guildford, Surrey
    Posts
    29,003
    Thanks
    13,752
    Thanks Received
    19,340

    Default Re: Urgent Help Needed

    Don't forget places for your balls to drain too.
    Ian #UKPachinko

  18. The following 2 users say "Thanks" to Drunkenclam


  19. #12
    Tokie Owens AJ Dragon's Avatar
    Join Date
    Jan 2018
    Location
    Puyallup, Wa.
    Posts
    30
    Thanks
    1
    Thanks Received
    17

    Default Re: Urgent Help Needed

    Hi

    Have you thought about maybe using french cleats for hanging them from the wall instead of setting them on shelves?

  20. #13
    I was thrown out of Top Gear Drunkenclam's Avatar
    Join Date
    May 2010
    Location
    Guildford, Surrey
    Posts
    29,003
    Thanks
    13,752
    Thanks Received
    19,340

    Default Re: Urgent Help Needed

    Its possible. But these ultra large agro style machines would probably suit a bench style.
    Ian #UKPachinko

  21. #14
    Tokie Owens F1ADO's Avatar
    Join Date
    Nov 2020
    Location
    Nottingham
    Posts
    16
    Thanks
    0
    Thanks Received
    20

    Default Re: Urgent Help Needed

    At least 2 of my machines that I have are super heavy, so Id be very nervous about putting them direct on to the wall, they weigh a good 50kg each and the walls are only plasterboard, so went for the safe option of putting them on the desk that i've built.

    I hope to get the main frame built tonight once I finish work so can at least start to unpack my machines and get them installed to see how they look and whether they feel stable etc with the doors open.

  22. The following user says "Thanks" to F1ADO


  23. #15
    Pachi Puro pachiwall's Avatar
    Join Date
    Oct 2010
    Location
    Dayton, Ohio
    Posts
    3,239
    Thanks
    4,682
    Thanks Received
    4,679

    Default Re: Urgent Help Needed

    Build freestanding cabinets for each machine. Fasten the top of the cabinet to the wall. Not sturdy enough yo support the weight...but to resist it from tipping when you open the door. Otherwise, you cam make the bottom of the cabinet (the foot?) deep enough (front to back), to keep it from tipping forward. The door is the whole weight of the machine...the cabinet and frame combined wont be heavy enough to hold it back.
    Last edited by pachiwall; 12-03-2020 at 12:33 PM.

  24. #16
    Tokie Owens F1ADO's Avatar
    Join Date
    Nov 2020
    Location
    Nottingham
    Posts
    16
    Thanks
    0
    Thanks Received
    20

    Default Re: Urgent Help Needed

    There are wooden supports behind each frame that a screwed to a frame behind the wall, so will more than support the weight of the door
    Attached Images Attached Images

  25. The following 3 users say "Thanks" to F1ADO


  26. #17
    Tokie Owens F1ADO's Avatar
    Join Date
    Nov 2020
    Location
    Nottingham
    Posts
    16
    Thanks
    0
    Thanks Received
    20

    Default Re: Urgent Help Needed

    Latest update pics from today, it's coming along nicely IMG_20201203_194208.jpg

  27. The following 6 users say "Thanks" to F1ADO


Similar Threads

  1. Urgent Help! Machine wont spin Video included
    By persianprez in forum Pachislo Technical Support Tickets
    Replies: 20
    Last Post: 09-15-2012, 08:18 AM
  2. Help very much needed
    By TechRef in forum Pachislo Technical Support Tickets
    Replies: 8
    Last Post: 04-01-2009, 09:57 PM
  3. A little help needed...
    By bill812 in forum Vintage Pachinko
    Replies: 7
    Last Post: 02-24-2009, 01:44 AM
  4. Another urgent Government Health Warning...
    By Meathead in forum These are the days of our lives...
    Replies: 2
    Last Post: 01-25-2008, 07:15 AM
  5. Batman - URGENT HELP clearing blockage
    By Bigsasquatch in forum Pachinko Modifications
    Replies: 11
    Last Post: 02-09-2006, 07:54 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •