Page 2 of 3 FirstFirst 1 2 3 LastLast
Results 21 to 40 of 49

Thread: First vintage Kyoraku

  1. #21
    Kungishi CarlW's Avatar
    Join Date
    Feb 2011
    Location
    Sugar Grove, Illinois
    Posts
    1,538
    Thanks
    2,315
    Thanks Received
    3,432

    Default Re: First vintage (Kyoraku)

    Baffling unfortunately. It all looks good to me.

  2. The following user says "Thanks" to CarlW


  3. #22
    Kungishi Tink's Avatar
    Join Date
    May 2015
    Location
    Alberta
    Posts
    1,985
    Thanks
    1,258
    Thanks Received
    1,465

    Default Re: First vintage (Kyoraku)

    Will the weight of a prize ball actuate the payout if it's empty?

  4. The following 2 users say "Thanks" to Tink


  5. #23
    Pachi Puro Moparformances's Avatar
    Join Date
    Jan 2009
    Location
    Diamond Springs CA
    Posts
    14,099
    Thanks
    26,564
    Thanks Received
    12,141

    Default Re: First vintage (Kyoraku)

    have your tried polishing the plastic bits that touch each other at the center of the jackpot mech..
    Never Doubt that a small group of thoughtful, .......... /........ If your not going to stand behind our troops
    ...committed people can change the world. ............. /.................Please, Please stand in front of them
    .....Indeed, it is the only thing that ever has............./
    .........................................Margaret Mead

  6. The following 2 users say "Thanks" to Moparformances


  7. #24
    Pachi Puro Moparformances's Avatar
    Join Date
    Jan 2009
    Location
    Diamond Springs CA
    Posts
    14,099
    Thanks
    26,564
    Thanks Received
    12,141

    Default Re: First vintage (Kyoraku)

    also the picture in the above post 6 shows a green E-clip.. have your cleaned these pivot points?? inside and out??
    Never Doubt that a small group of thoughtful, .......... /........ If your not going to stand behind our troops
    ...committed people can change the world. ............. /.................Please, Please stand in front of them
    .....Indeed, it is the only thing that ever has............./
    .........................................Margaret Mead

  8. The following 2 users say "Thanks" to Moparformances


  9. #25
    Blind Shooter wolfie1299's Avatar
    Join Date
    Mar 2016
    Location
    Portland, OR
    Posts
    36
    Thanks
    44
    Thanks Received
    34

    Default Re: First vintage (Kyoraku)

    Quote Originally Posted by Tink View Post
    Will the weight of a prize ball actuate the payout if it's empty?
    Yes, the weight of a prize ball with actuate a payout when it's empty.

    Quote Originally Posted by Moparformances View Post
    have your tried polishing the plastic bits that touch each other at the center of the jackpot mech..
    I haven't gotten to tearing that area apart, I was hoping I could play it without doing that, it's a bit intimidating to me.

    Quote Originally Posted by Moparformances View Post
    also the picture in the above post 6 shows a green E-clip.. have your cleaned these pivot points?? inside and out??
    No, I haven't cleaned them out yet, as I said above, I'm a little intimidated by the whole mechanism, but that seems to be what my next step needs to be if I want to be able to play it.

    Thanks for all the replies!!

  10. The following user says "Thanks" to wolfie1299


  11. #26
    Kungishi Tink's Avatar
    Join Date
    May 2015
    Location
    Alberta
    Posts
    1,985
    Thanks
    1,258
    Thanks Received
    1,465

    Default Re: First vintage (Kyoraku)

    A good clean and polish of the pivot points can make a huge difference.

  12. The following 2 users say "Thanks" to Tink


  13. #27
    Pachi Puro Moparformances's Avatar
    Join Date
    Jan 2009
    Location
    Diamond Springs CA
    Posts
    14,099
    Thanks
    26,564
    Thanks Received
    12,141

    Default Re: First vintage (Kyoraku)

    Quote Originally Posted by wolfie1299 View Post

    No, I haven't cleaned them out yet, as I said above, I'm a little intimidated by the whole mechanism, but that seems to be what my next step needs to be if I want to be able to play it.

    Thanks for all the replies!!
    this would be a great place to start.. take your time take lots of pictures.. clen in in a large place like the dining room table so you can place the parts in the order they were removed so you can put them back in the reverse order..

    its really perty easy...
    Never Doubt that a small group of thoughtful, .......... /........ If your not going to stand behind our troops
    ...committed people can change the world. ............. /.................Please, Please stand in front of them
    .....Indeed, it is the only thing that ever has............./
    .........................................Margaret Mead

  14. The following 5 users say "Thanks" to Moparformances


  15. #28
    Kungishi Spyder138's Avatar
    Join Date
    Sep 2014
    Location
    San Jose, CA
    Posts
    1,120
    Thanks
    3,399
    Thanks Received
    1,821

    Default Re: First vintage (Kyoraku)

    Quote Originally Posted by Moparformances View Post
    this would be a great place to start.. take your time take lots of pictures.. clen in in a large place like the dining room table so you can place the parts in the order they were removed so you can put them back in the reverse order..

    its really perty easy...
    And be careful when removing the eclip. They like to fly across the room never to be seen again.

  16. The following 5 users say "Thanks" to Spyder138


  17. #29
    Blind Shooter wolfie1299's Avatar
    Join Date
    Mar 2016
    Location
    Portland, OR
    Posts
    36
    Thanks
    44
    Thanks Received
    34

    Default Re: First vintage (Kyoraku)

    So, update, I haven't tested it yet, I haven't completed the cleaning that I want to do to ensure I don't have to tear it apart again, but the parts of it that I've gotten cleaned up and put back together seem to be moving even better than they were before. I didn't think they were that tough to move before.

    As far as the e-clips...I've been very fortunate. I've dropped one 3 times, and I was able to find it again and FINALLY get that one clipped on

    Thank you EVERYONE for all your suggestions and pointers, I'm getting really excited to possibly have a completely working machine

  18. The following user says "Thanks" to wolfie1299


  19. #30
    Blind Shooter wolfie1299's Avatar
    Join Date
    Mar 2016
    Location
    Portland, OR
    Posts
    36
    Thanks
    44
    Thanks Received
    34

    Default Re: First vintage (Kyoraku)

    Well, finally finished cleaning everything that I wanted to clean, and it still doesn't work. I'm going to be getting a tumbler and cleaning all the balls, **maybe** that will fix the issue...otherwise I've got nothing

  20. #31
    Blind Shooter wolfie1299's Avatar
    Join Date
    Mar 2016
    Location
    Portland, OR
    Posts
    36
    Thanks
    44
    Thanks Received
    34

    Default Re: First vintage (Kyoraku)

    Ok, so here's something that I noticed. Referencing the video where the balls actually move when I manually move the jackpot lever(here https://www.youtube.com/watch?v=M8RtpbdSbGE). I'm wondering if the thing that's supposed to stop the balls from falling into the jackpot area is not supposed to be touching any of the balls that are already there. In the picture here, one of the balls seems to be sitting out of place compared to the other side and all of the other balls:
    IMG_2898[1].jpg

    So maybe the little metal part that is on the left needs to be bent in a little? I don't know, I'm grasping at anything that I can think of...I really want this machine to work.

  21. The following user says "Thanks" to wolfie1299


  22. #32
    Kungishi Tink's Avatar
    Join Date
    May 2015
    Location
    Alberta
    Posts
    1,985
    Thanks
    1,258
    Thanks Received
    1,465

    Default Re: First vintage (Kyoraku)

    Do post a couple good clear pics of the entire back without any covers. Maybe an alignment issue somewhere.

    Did you clean and polish all the pivot points from the seesaw through to the jackpot mech including a complete jackpot dissassembly?

  23. The following user says "Thanks" to Tink


  24. #33
    Kungishi Tink's Avatar
    Join Date
    May 2015
    Location
    Alberta
    Posts
    1,985
    Thanks
    1,258
    Thanks Received
    1,465

    Default Re: First vintage (Kyoraku)

    Quote Originally Posted by wolfie1299 View Post
    Ok, so here's something that I noticed. Referencing the video where the balls actually move when I manually move the jackpot lever(here https://www.youtube.com/watch?v=M8RtpbdSbGE). I'm wondering if the thing that's supposed to stop the balls from falling into the jackpot area is not supposed to be touching any of the balls that are already there. In the picture here, one of the balls seems to be sitting out of place compared to the other side and all of the other balls:
    IMG_2898[1].jpg

    So maybe the little metal part that is on the left needs to be bent in a little? I don't know, I'm grasping at anything that I can think of...I really want this machine to work.
    Would you post another close up without the balls?

    You maybe onto something here.

  25. The following user says "Thanks" to Tink


  26. #34
    Blind Shooter wolfie1299's Avatar
    Join Date
    Mar 2016
    Location
    Portland, OR
    Posts
    36
    Thanks
    44
    Thanks Received
    34

    Default Re: First vintage (Kyoraku)

    Ok, here are some pics of the jackpot area without the balls in:
    IMG_2899[1].jpgIMG_2900[1].jpgIMG_2901[1].jpgIMG_2902[1].jpg

    and here are some pics of the back without as many covers as I could pretty easily get off:
    IMG_2903[1].jpgIMG_2904[1].jpgIMG_2905[1].jpg

    Thank you so much for taking a look!

  27. #35
    Kungishi Tink's Avatar
    Join Date
    May 2015
    Location
    Alberta
    Posts
    1,985
    Thanks
    1,258
    Thanks Received
    1,465

    Default Re: First vintage (Kyoraku)

    I checked all my machines and unfortunately I don't have one with that plastic ball stop. Can you pull the jackpot mech out and see if it looks off at all? Everyone I have or have seen of that style payout mech all have just a metal stop plate.
    I would think it should block the flow of balls easily without them having to move. Perhaps it is bent slightly on one side?

  28. The following user says "Thanks" to Tink


  29. #36
    Blind Shooter wolfie1299's Avatar
    Join Date
    Mar 2016
    Location
    Portland, OR
    Posts
    36
    Thanks
    44
    Thanks Received
    34

    Default Re: First vintage (Kyoraku)

    The stopper plate doesn't seem to be bent at all, but I did notice that the bottom metal piece doesn't seem to be sitting 'straight':
    IMG_2907.jpg

    The left side seems much closer to the edge above it than the right side. Does this look 'normal' or might that be some of the problem?

    Also...does anyone know how many balls this machine is supposed to pay out on a jackpot? It seems like it is 15.

  30. #37
    Kungishi Tink's Avatar
    Join Date
    May 2015
    Location
    Alberta
    Posts
    1,985
    Thanks
    1,258
    Thanks Received
    1,465

    Default Re: First vintage (Kyoraku)

    Looks ok. Some seem to be slightly offset. Is probably a 15 payout, if less it is usually noted somewhere on the machine.

    Just thinking outside the box here, but you are using real pachinko balls right? Size or weight could be a factor.

  31. The following user says "Thanks" to Tink


  32. #38
    Blind Shooter wolfie1299's Avatar
    Join Date
    Mar 2016
    Location
    Portland, OR
    Posts
    36
    Thanks
    44
    Thanks Received
    34

    Default Re: First vintage (Kyoraku)

    Yeah, they're real pachinko balls, some of them etched even

  33. #39
    Kungishi Tink's Avatar
    Join Date
    May 2015
    Location
    Alberta
    Posts
    1,985
    Thanks
    1,258
    Thanks Received
    1,465

    Default Re: First vintage (Kyoraku)

    Definitely a head scratcher.

    Maybe load the payout mech while you have it off the machine and see if you can adjust something to allow the stop plate to block without it having to move balls to do so.

  34. The following user says "Thanks" to Tink


  35. #40
    Blind Shooter wolfie1299's Avatar
    Join Date
    Mar 2016
    Location
    Portland, OR
    Posts
    36
    Thanks
    44
    Thanks Received
    34

    Default Re: First vintage (Kyoraku)

    Thank you for the suggestion, I'll see what I can do with that

Page 2 of 3 FirstFirst 1 2 3 LastLast

Similar Threads

  1. Vintage Kyoraku Sun 406 Pachinko Machine
    By Jumbosinbad360 in forum Members Ebay Auctions
    Replies: 2
    Last Post: 06-16-2013, 03:23 AM
  2. Kyoraku wiring help on a vintage pachinko!!!
    By awassig in forum Pachinko Technical Support Tickets
    Replies: 14
    Last Post: 06-13-2013, 09:18 PM
  3. Ebay Auction : Vintage Kyoraku Pachinko
    By hanabi in forum eBay - General Auction listings
    Replies: 3
    Last Post: 03-11-2013, 06:09 PM
  4. Interesting Kyoraku Vintage...
    By JACKSJE4 in forum FB Marketplace, Craig's List and Other Listings
    Replies: 3
    Last Post: 02-02-2012, 09:27 PM
  5. Vintage Kyoraku
    By hanabi in forum eBay - General Auction listings
    Replies: 4
    Last Post: 01-03-2010, 01:54 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •