Mizuho 20" LCD Frame Cutie Honey Cyclic and Autoplay

[CarlW]

Any advice on setting up a Mizuho Cutie Honey to full cyclic and Autoplay?

Maybe links to point me in right direction...

THANKS !!!

[hanabi]

I might be mistaken but I believe the only cyclic stuff in the RC is for Heiwa, Taiyo and Lumina frames i believe

hopefully someone may have some info for you, but I don't think many members convert them these days

Although I think Ian / Drunkenclam has converted / reverse engineered? some frames back to normal play from Cyclic or semi cyclic, so he may have some advice?

[luckydog]

Greg "Arby" did that on my Heiwa Bunny Girl pachinko years ago, but, he's never around anymore

I can play it with 15 or 20 balls or just keep pushing a button for screen reaches

[Drunkenclam]

The ones I've reversed normally have the payout system complete but no balls in it with the low ball indicator light disabled or covered. As for recycling the balls. It's normally a 3/4 or 1 inch section of L shaped plastic channel glued to the back of the cel or frame to divert the balls to the front tray. The frame plastic is cut out to fit the channel in.

[Drunkenclam]

Opps. Missed the bit about the auto play. I've seen 2 different types. The first is a basic circuit that impulses the start pocket input (probably a NO circuit sending a closed signal) might just be an on/off switch, or a variable resistor to change the amount if pulses per minute. The second type is the same but it also has a feed from the jackpot door solenoid and a return to the jackpot ball sensor. So during jackpot, every time the trapdoor opens, it pulses the jackpot sensor, so as to speed through the video sequence.