help on sammy

[hog chaser]

Pictures would certainly help. You have an amazing group of people here to help.

you got that right cuz

[alphaminor]

Well,Its not a puncture,sounding more like a jam,

here are pics of the release lever area, will have more pics and details on the areas to focus on for you tonight or in the morning
2000 frame ball release location.jpg2000 frame release lever closed.jpg2000 frame release lever open.jpg the close up pic with the red circle is the release lever in the closed position (ready to play), the last pic is it open (which will let them flow through)

except what's already in the payout mechs ( more pics to follow)

good grief! my machine is dusty never got around to cleaning it

[MrGneiss]

Just a question..Did it ever pay out anything?? It should pay out some every time you get a ball in a pocket, including the start pocket..

[hog chaser]

Just a question..Did it ever pay out anything?? It should pay out some every time you get a ball in a pocket, including the start pocket..

no payouts at all.thanks for asking

[hog chaser]

Well,Its not a puncture,sounding more like a jam,

here are pics of the release lever area, will have more pics and details on the areas to focus on for you tonight or in the morning
2000 frame ball release location.jpg2000 frame release lever closed.jpg2000 frame release lever open.jpg the close up pic with the red circle is the release lever in the closed position (ready to play), the last pic is it open (which will let them flow through)

except what's already in the payout mechs ( more pics to follow)

good grief! my machine is dusty never got around to cleaning it

pulled that lever,top part empty.now after that lever is what i need to empty.short of turning the machine
upside down,idon`t know.i opened the cover that shows after the lever.i don`t see any more levers

[alphaminor]

Good Morning

here is a picture of the back with some areas to check out

2000 frame back numbered.jpg

One thing about this model i've yet to see on others, is that the motor marked by #2 is always running, it turns a double paddle wheel that uses win balls, that go in pockets, to push two "hammers" that are connected to the payout mech in area #1

if this motor is not turning something is wrong,there is a little horizontal wire in are #3 that will move slightly left or right,it need to be in the "left" position while playing,I think the motor will turn off if its in the wrong position(It some kind of reset lever,but Im still learning and don't know for sure what it does yet)

here is a picturefor reference

area #1 opened2000 frame payout mech.jpg area #2 opened2000 lower payout mech.jpg
area #3 wire2000 payout motor reset wire.jpg

hope this helps


PS you can maually empty the upper payout mech in area #1 by manually manipulating it,or even taking it out, there is a release tab in side there just to the left of where the balls reside

jus t be careful and dont force anything

[alphaminor]

correction: the "hammers" are not connected to the payout mech,they just push the winning ball into the connectors that push the upper payout levers

[hog chaser]

Good Morning

here is a picture of the back with some areas to check out

2000 frame back numbered.jpg

One thing about this model i've yet to see on others, is that the motor marked by #2 is always running, it turns a double paddle wheel that uses win balls, that go in pockets, to push two "hammers" that are connected to the payout mech in area #1

if this motor is not turning something is wrong,there is a little horizontal wire in are #3 that will move slightly left or right,it need to be in the "left" position while playing,I think the motor will turn off if its in the wrong position(It some kind of reset lever,but Im still learning and don't know for sure what it does yet)

here is a picturefor reference

area #1 opened2000 frame payout mech.jpg area #2 opened2000 lower payout mech.jpg
area #3 wire2000 payout motor reset wire.jpg

hope this helps


PS you can maually empty the upper payout mech in area #1 by manually manipulating it,or even taking it out, there is a release tab in side there just to the left of where the balls reside

jus t be careful and dont force anything

ok i have to get some pictures on here.there some differances between our machines.i was trying to print out hanabi instructions on down loading
pictures to this site.but my comp won`t let me print it out.will get back to you

[alphaminor]

Important correction:

just checked and the #3 wire should naturally rest in the right postion,you slightly pull left to reset it

[alphaminor]

ok i have to get some pictures on here.there some differances between our machines.i was trying to print out hanabi instructions on down loading
pictures to this site.but my comp won`t let me print it out.will get back to you

cool

[hanabi]

ok i have to get some pictures on here.there some differances between our machines.i was trying to print out hanabi instructions on down loading
pictures to this site.but my comp won`t let me print it out.will get back to you

a simple way is to just click 'go advanced' at the bottom of your reply box
then click the little paperclip icon picture on the top row of the post box that opens up to you (it's to the right of the yellow smiley face )

you should be able to then upload from your computer

[hog chaser]

a simple way is to just click 'go advanced' at the bottom of your reply box
then click the little paperclip icon picture on the top row of the post box that opens up to you (it's to the right of the yellow smiley face )

you should be able to then upload from your computer

i tryed it it keeps telling error on upload. i tryed it on 6 different pictures.there has to be a way to beat this

[Card Shark]

Have you checked the file size of the pictures you are trying to upload? I run into that problem sometimes. I believe they need to be under 2MB.

[hog chaser]

i tryed it it keeps telling error on upload. i tryed it on 6 different pictures.there has to be a way to beat this

is there some way i could e-mail these to you.

[hog chaser]

Have you checked the file size of the pictures you are trying to upload? I run into that problem sometimes. I believe they need to be under 2MB.

at first i thouht it was doing the whole file.then i could see it was doing
one picture.thanks for the input

[hog chaser]

cool

can you help me out,i have the pictures.i can`t upload them.it keeps showing error.is there some way i could e-mail them to you
i don`t know if thats aloud her.

[Card Shark]

PM sent

[alphaminor]

Sounds like Card Shark has got you covered, thanks Shark! :-)

[Card Shark]

Sounds like Card Shark has got you covered, thanks Shark! :-)

Always willing to help

[hanabi]

is there some way i could e-mail these to you.

can you help me out,i have the pictures.i can`t upload them.it keeps showing error.is there some way i could e-mail them to you
i don`t know if thats aloud her.

PM sent

Did you manage to get the pics emailed / sorted or are there still problems with the uploading / attaching? If so, then you can of course email them to me (PM me) and I'll see if I can help

Just a few notes about the pic uploader here:

when you access the 'paperclip' icon, you will see a little blue circle with a question mark in it at the top right, click that and it will give a chart of all the acceptable file types and their sizes, it could be an incompatible type or size?

Also, there is the option to use the 'basic uploader', again access using the 'paperclip' icon and clicking '+Add Files' at the bottom right of this box you can then click 'basic uploader'