Yuki's Jacpot Woes

[Drunkenclam]

After a nasty wet weekend, I did some cleaning on my model A.
Here is the problem. The balls tip out of the seesaw, bounce off the bell. The larger seesaw then goes down and the balls are meant to go through the cell and out to the top ball tray.
Mine the balls get stuck coming off the seesaw ramp, either then rolling down to the bottom ball tray or just sitting there. As the ramp has balls on it. It doesn't reset, so the trigger/ ball win seasaw also doesn't reset, so no more wins. I can't see any way of adjusting it. Also the ramp has about 1/8 inch play away from the wooden backing.

Any thoughts people?

Sorry for the crude pics, My wife took my camera today.

Oh this may be dupilated as I originally typed this just as the server went down

[Moparformances]

on my machine the bell is the stop point for the ramp... meaning the bell is the first thing that is hit as the ramp swings down... is there a way to bend the bell up just a bit to restrict the downward travel of the ramp...

ot at the end of the ramp place something under it as a stop block???

[Drunkenclam]

Cheers for that.
I could try putting a small nail in as a stop. But wanted to ask first before doing any modifications.
______________________________________________________
Cheers for that.
I could try putting a small nail in as a stop. But wanted to ask first before doing any modifications.

[Moparformances]

let us know if that solves it for ya

[Drunkenclam]

SUCCESS

A small diameter 2" panel pin inserted into a pre-drilled hole has solved the problem,
Adjusted the release lever for the top hopper release and checked that the shooter disconnects if the bottom tray is full.
Everything working ace. Only things to do now is...


1) Clean up the playing field.
2) Clean the nails, chrome and wooden frame,
3) Replace the lock to open the cabinet.
4) Replace the plexi with glass, As its to flexible and balls are getting stuck between the plexi and the tulips.

Thanks Guys

[Moparformances]

glad to hear ya got it sorted...