modification

[thedream]

I just bought this machine and it has some kind of modification that the wires came off and i was wondering if any one could help me with where they belong

[birdbrain]

we'll be needing a little more info than that

[thedream]

What info do you need?
______________________________________________________
there is a small board mounted on the back of the door that has 4 ics on it it is wired to the small board on the top left inside and to the back of the front panel

[birdbrain]

ok we'll need the manufacture, and defiantly need pictures. you must remember there are hundreds if not thousands of different variations of these machines, judging by the name yours is either a very early one or a custom and we will have to figure out what it started life as first.
now the other possibility is : that it is an American machine and there are only a few members here that deal with them.

[luckydog]

I think the Dunes was a custom bellyglass machine that was being sold a few years ago as coming from the Dunes casino. when it really was from a Japanese Palour.

if the machine works properly, they may just be wires the palour used to hook up the pachislo to their computer system.

I have got a couple of machines with those wires still in them.

[thedream]

I have pictures if that would help.How do i post them. It is a japanese machine.Most of the labels on the inside have been blackened out with marker.

[birdbrain]

when you reply, hit the 'go advanced' button below the window you are typing in. this will take you to a different screen ,below the message area there is a button that says 'manage attachments', by clicking on this you will be given the option to upload your pics.

[luckydog]

Unknown machine

[thedream]

Here are the photos that i have, the front of the machine and the board and connections.

[alstonj1]

The chip pics giving me a headache looks to be a auto stop board of some kind and i see it has a crappy ebay handle on it also ..( get a real igt arm to replace it they work better )
______________________________________________________
go here and buy a plug in board to replace the hard wired one . then clip the hard wired one out .

PachiTalk Research Center - Vendors Parts - AutoSlot - PachiTalk

[autoslot]

It looks to me like it is wired to the relay area of the stop board, possibly some type of parlour interface or battle counter interface.

[thedream]

ok, I removed it, the machine is in payout mode which it was in when i got it how can i reset it? I have a manual but not the one for this machine from what i can tell. Do i have to have tokens in it?On the front the wait light is lit.I belive it is an older machine when i went to the link for stop boards mine looked like the one that they said it would not work for.Also the machine does say sammy on the front.