Page 1 of 3 1 2 3 LastLast
Results 1 to 20 of 55

Thread: Azteca Legend error I can't clear

  1. #1
    Blind Shooter k46tank's Avatar
    Join Date
    Dec 2004
    Location
    Bryant, Arkansas
    Posts
    32
    Thanks
    0
    Thanks Received
    0

    Default Azteca Legend error I can't clear

    My Azteca Legend just started showing the following error messages on the LCD screen. It alternates between this:

    http://img.villagephotos.com/p/2004-...073/error1.jpg

    and this:

    http://img.villagephotos.com/p/2004-...073/error2.jpg

    Any ideas? I have tried resetting it and leaving it unplugged for a couple of days.

  2. #2
    Sparky RKnarr01's Avatar
    Join Date
    Nov 2004
    Location
    Rochester, NY
    Posts
    3,888
    Thanks
    50
    Thanks Received
    410

    Default

    similar thing happened to my b sapp try doing a major reset that should do it.

  3. #3
    Sparky RKnarr01's Avatar
    Join Date
    Nov 2004
    Location
    Rochester, NY
    Posts
    3,888
    Thanks
    50
    Thanks Received
    410

    Default

    did a token get stuck in the coin shoot because thats what caused mine.

  4. #4
    Blind Shooter k46tank's Avatar
    Join Date
    Dec 2004
    Location
    Bryant, Arkansas
    Posts
    32
    Thanks
    0
    Thanks Received
    0

    Default

    I have tried a major reset with no luck. I have checked the coin path and nothing is stuck in it. Things that make you go HMMMMMM

  5. #5
    Sparky RKnarr01's Avatar
    Join Date
    Nov 2004
    Location
    Rochester, NY
    Posts
    3,888
    Thanks
    50
    Thanks Received
    410

    Default

    i will get this error to show up on my machine right now and then ill tell you exactly how i fixed it

  6. #6
    Sparky RKnarr01's Avatar
    Join Date
    Nov 2004
    Location
    Rochester, NY
    Posts
    3,888
    Thanks
    50
    Thanks Received
    410

    Default

    turn power off
    insert reset key
    turn reset right
    turn power back on
    depress joystick for 5 secs and then remove key and insert token

    if this doesnt work then i have no idea

  7. #7
    Goodwill Ambassador luckydog's Avatar
    Join Date
    Nov 2004
    Location
    bradenton, florida
    Posts
    31,487
    Thanks
    13,448
    Thanks Received
    24,112

    Default

    have you checked your hopper for a jam, you can manually turn it either way.

    or how about checking all your connections :lol: :lol:
    幸運わんわん Luckydog or Yukiwanwan in Japanese

  8. #8
    Sparky RKnarr01's Avatar
    Join Date
    Nov 2004
    Location
    Rochester, NY
    Posts
    3,888
    Thanks
    50
    Thanks Received
    410

    Default

    in your first pic there are boxes that say "CR" and so on are any of those boxes highlighted?

  9. #9
    Utopia1dc
    Lurker Utopia1dc's Avatar

    Default

    Mine did the same thing a few times when hopper was empty. I had to do the major reset a few times in a row and then it worked. Why it didn't reset on the first try, I don't know. I usually have to do it 2, 3, or 4 times - Go figure?

  10. #10
    Eye Shooter Davis's Avatar
    Join Date
    Nov 2004
    Location
    Anderson IN
    Posts
    972
    Thanks
    27
    Thanks Received
    26

    Default

    Id say a coin is jamed, or a wire has come unplugged. Make sure hte hooper is plugged in tight and also look to make sure all the wires from the coin mech are connected also!

  11. #11
    Blind Shooter k46tank's Avatar
    Join Date
    Dec 2004
    Location
    Bryant, Arkansas
    Posts
    32
    Thanks
    0
    Thanks Received
    0

    Default

    I have checked all of the fuses, plugged and unplugged all of the connectors, reset the you-know-what out of it, checked the hopper and the coin mechanism and everything seems to be normal. I don't know........maybe the coin mechanism has gone bad??? I wish I could read Japanese.

    None of the boxes with the error codes are highlighted and the entire front of the machine is dark...other than the LCD screen.

  12. #12
    Goodwill Ambassador luckydog's Avatar
    Join Date
    Nov 2004
    Location
    bradenton, florida
    Posts
    31,487
    Thanks
    13,448
    Thanks Received
    24,112

    Default

    when did you buy it and from who?

    you could call their customer service dept.
    幸運わんわん Luckydog or Yukiwanwan in Japanese

  13. #13
    You're Welcome! azlew's Avatar
    Join Date
    Nov 2004
    Posts
    4,877
    Thanks
    12,933
    Thanks Received
    2,837

    Default

    Has your Pachislo been converted to accept quarters...I know a long shot but maybe ?

  14. #14
    Blind Shooter k46tank's Avatar
    Join Date
    Dec 2004
    Location
    Bryant, Arkansas
    Posts
    32
    Thanks
    0
    Thanks Received
    0

    Default

    I got it from DGI (Skillstop.com) when their traveling show came through. I have been wrestling with a broken computer all day, so I didn't have time to call their support line. It will take quarters but I don't see how that would prevent it from resetting.....but maybe I missed something, I am pretty new to this world of Pachislo.

  15. #15
    Pachi Puro logicprobe's Avatar
    Join Date
    Nov 2004
    Location
    NE PA
    Posts
    6,565
    Thanks
    5,854
    Thanks Received
    3,903

    Default

    If taking the hopper out, shaking it, and spinning the rotor (token dial inside) doesn't release a bent token or something... perhaps a call to DGI might be your best bet here.

    There are a few members that can read Japanese, and might be able to make sense of those pics... but Japanese characters are often intricate. They will probably need a better shot to look at.

    The same troubleshooting question I ask when repairing anything...
    What was it doing when you first got this error message?
    Was it paying out? Were you loading tokens for credits?? Did you just turn it on? The key to finding your answer might be... what was it trying to do that forced it into this error? It sure doesn't look like HJ or HE or any other codes are lit from that pic.

    You say it does this when you turn it on now. Does it also do this immediately after a master reset? Can you even get to the reset "menu" at all??? (Power off, Reset key on, Power on)
    logicprobe
    Retired - Living on a Wing and a prayer!

  16. #16
    Sparky RKnarr01's Avatar
    Join Date
    Nov 2004
    Location
    Rochester, NY
    Posts
    3,888
    Thanks
    50
    Thanks Received
    410

    Default

    i can read some japanese if you can get a closer picture i might be able to help

  17. #17
    Blind Shooter k46tank's Avatar
    Join Date
    Dec 2004
    Location
    Bryant, Arkansas
    Posts
    32
    Thanks
    0
    Thanks Received
    0

    Default

    O.K. here are some better pics...I think. I had to turn them to grayscale so they would come in under the 120K requirement of the photo hosting site. I can email larger, higher quality pics if needed.
    http://img.villagephotos.com/p/2004-.../Photo0001.jpg

    and
    http://img.villagephotos.com/p/2004-.../Photo0002.jpg

    I first got the error when I first powered the machine on the other morning. It had been working fine the night before. I did find out that my wife tried to adjust the volume by turning the "volume knobs" inside the door...............Thats right folks, she tried to adjust the volume by turning the light bulbs :roll: . I found that one had fallen out and into the overflow bin, but other than that she swears that she didn't do anything else. Thanks for all of the input thus far.

  18. #18
    Sparky RKnarr01's Avatar
    Join Date
    Nov 2004
    Location
    Rochester, NY
    Posts
    3,888
    Thanks
    50
    Thanks Received
    410

    Default

    it 3am here in ny now and quickly i can tell you that in the 2nd set of pics the bottom picture says "the first part i cant get" but the second half of the writing says error. i know it not much help, we all knew it was an error to begin with. but when i wake up in the morning ill try to get the rest translated.

  19. #19
    Blind Shooter pachislousa's Avatar
    Join Date
    Dec 2004
    Posts
    49
    Thanks
    0
    Thanks Received
    8

    Default

    It's not a standard 'coin stuck' error. If you notice, none of the options are highlighted on that error page. I have a customer that has a machine showing this problem also; should have the machine picked up in about a week or so and will hopefully be able to add more then (unless you guys figure it out by then!)

    A standard reset doesn't clear the error, and nothing is stuck in the coin path or hopper...

  20. #20
    Blind Shooter k46tank's Avatar
    Join Date
    Dec 2004
    Location
    Bryant, Arkansas
    Posts
    32
    Thanks
    0
    Thanks Received
    0

    Default

    I don't remember ever seeing that screen when I did have a coin jam. If I remember correctly I just had a "CJ" come up in the LED window and nothing on the screen, but I'm not sure. I am about to wear a blister on my chin standing if front of this machine going HMMMMM!

Page 1 of 3 1 2 3 LastLast

Similar Threads

  1. Azteca: The Legend Returns Error
    By applemaster in forum Pachislo Technical Support Tickets
    Replies: 4
    Last Post: 01-03-2011, 10:12 PM
  2. Azteca Legend Gold-Azteca Legend Silver-Outlaw
    By RKnarr01 in forum Model Talk
    Replies: 15
    Last Post: 06-05-2007, 12:06 PM
  3. Azteca Legend Vs. Legend Returns
    By hubigpie in forum Model Talk
    Replies: 4
    Last Post: 01-06-2006, 09:26 AM
  4. Azteca Legend
    By swine in forum Pachislo Modifications
    Replies: 5
    Last Post: 09-26-2005, 07:38 PM
  5. Azteca Legend
    By Drugdoc in forum Model Talk
    Replies: 4
    Last Post: 08-28-2005, 08:16 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •