Quote Originally Posted by chello22 View Post
Balls go to the back of the machine whilst playing
In that case, it’s not cyclitic, could be a bad payout motor or bad cell (not sending signal for payout) I’ve got a cell that won’t payout for some mysterious reason; swap the cell and the frame starts paying out just fine.

Best course of action would be find a member with same frame; see if they would let you swap your cell into their known “good” frame, if that works then you know it’s the payout system on your frame; then maybe try to temporarily swap in their known good payout motor and see if it works.

I assume you’ve tried a full reset right? The little reset button you hold down while powering on the machine? That should temporarily clear all errors, unless something is disconnected; make sure all connectors to the payout motor are secure too. Good luck! These sorts of problems are a pain to deal with but most of the time can be sorted out, soon enough you’ll be a certified pachinko repairman!


Sent from my iPhone using Tapatalk