Power Flash on Sacramento Craigslist vintage pachinko

[mudfud]

that's not the stock transformer. it looks like a doorbell transformer.

the stock one has two voltage outputs, one is 10v, one is 20v, and it's a little bigger.

I would do what sharmoni did and wire the lights to 9v. then, get a little bigger transformer for the solenoids. compirate's right that .83A might be a little low for those solenoids, especially since more than one has to engage for a couple of the actions. I'm guessing each one draws about 1 amp.

that face isn't bad. use the curved instrument I gave you with a piece of old rag or T shirt. moisten with 409 or windex and rub gently. as rusty said, don't wipe the printed labels, as they will wipe off.

nice score. can't wait to see it cleaned up. I can lend you my silver paint pen to freshen up the raised areas.

p.s. I did post a vid on the powerflash, if you need it, but this one has less movement than ours, and doesn't have the extra relay, by my recollection.

p.p.s. if you want the big transformer I took off of jaws (24 vac, 6 amps), you can have it, but it's kinda over kill for the powerflash (works on the modern pachinkos and pachislots)