Heiwa naniwa sakura fubuki needs help
I bought this 2001 Heiwa Naniwa Sakura Fubuki machine yesterday for $25 sight unseen.
I figured even if it is a total wreck selling the buttons alone would recover $25
The markings on the outside of the machine are all Heiwa but all of the boards inside are marked Olympia.
PXL_20250413_154158528.jpgPXL_20250413_153606129.jpg
So, the cabinet lights work.....
And that's pretty much it.
There is a slight hum coming from the speakers.
The reels do not light up.
I have never seen a power supply quite like this one and do not know for sure how to do a full reset on it.
PXL_20250413_163356484.jpg
The read out displays do not light up either so I can't see any codes.
I can read just above 20 volts at different places on the circuit board so it is getting power to it.
PXL_20250413_153103740.jpgPXL_20250413_153245144.jpgPXL_20250413_153152400.jpg
When I drop a token in both coin sensor 1 and 2 LEDS light on the main board but nothing registers.
Pressing the spin lever does nothing at all.
The Max Bet and Spin and 3 Stop buttons that connect to this board do light their corresponding LEDS
on the main board as well.
One more incidental discovery.
I applied 5 volts to the coin mechanism solenoid, and it did retract.
I accidentally bumped those connections with the back of my hand and felt a little jingle you wouldn't expect from 5 volts. It measured 24.2 Volts. When I removed the 5 Volt connection it measured nothing at all.
Is this a control voltage missing?
Any ideas that could be added to my personal ramblings would be greatly appreciated.
Reply With Quote
