Results 1 to 7 of 7

Thread: New member here and looking for some info and help

  1. #1
    Tokie Owens BR549AUTOSALES's Avatar
    Join Date
    Jan 2012
    Location
    Birmingham, AL
    Posts
    18
    Thanks
    0
    Thanks Received
    5

    Default New member here and looking for some info and help

    Hello all, I have just aquired 2 Pachislo machines, 1 is a Bellco AM Bingo machine and the other is a NDT AM Super Planet. Neither one of them work, but the Super Planet almost does. The Super Planet will accept tokens and they do register but when I spin the reels they will not stop with the skill stop buttons. I did find some info that said to replace the fuse on the board that is associated with the skill stop buttons, I did that but it blew when I powered the game back on. As far as the Bingo machine, it just barely lights up and won't accept any coins at all. Any ideas as to where I should begin with these?

    Thanks,

    David

  2. The following 2 users say "Thanks" to BR549AUTOSALES


  3. #2
    MacGruber JACKSJE4's Avatar
    Join Date
    Dec 2008
    Location
    Denver, CO
    Posts
    5,002
    Thanks
    11,367
    Thanks Received
    14,376

    Default Re: New member here and looking for some info and help



    Welcome to PachiTalk, David! Thanks for joining our forum and becoming a member.

    Unfortunately, I do not know enough about Pachislo machines to provide you with any help, however I am certain that one of our members with expertise in Pachislo machines will be along shortly to provide you with the assistance you are seeking. I simply wanted to pop in and welcome you to the forum, as well as let you know that I moved your thread into the Pachislo Technical Support Tickets forum where it will get the attention of the experts.

    Again, welcome to PachiTalk! We are thrilled to have you as a new member of our community.

    Jeff
    Jeff Jackson, Denver CO

    There is a fine line between "hobby" and "mental illness."

  4. #3
    Goodwill Ambassador luckydog's Avatar
    Join Date
    Nov 2004
    Location
    bradenton, florida
    Posts
    31,487
    Thanks
    13,448
    Thanks Received
    24,112

    Default Re: New member here and looking for some info and help

    the first thing i would do is check all wiring for good connections or bare wire that may be shorting out

    the stop buttons may need cleaning or joystick may not be going back to center
    幸運わんわん Luckydog or Yukiwanwan in Japanese

  5. The following user says "Thanks" to luckydog


  6. #4
    Tokie Owens BR549AUTOSALES's Avatar
    Join Date
    Jan 2012
    Location
    Birmingham, AL
    Posts
    18
    Thanks
    0
    Thanks Received
    5

    Default Re: New member here and looking for some info and help

    I have looked inside the machine and do not see any bad wire or shorted wires anywhere, could the board where that fuse is located be bad? On the other machine I am just getting a few gen. Illumination lights and that's it. Are spare parts available for these machines?

    Thanks,

    David

  7. #5
    Tokie Owens BR549AUTOSALES's Avatar
    Join Date
    Jan 2012
    Location
    Birmingham, AL
    Posts
    18
    Thanks
    0
    Thanks Received
    5

    Default Re: New member here and looking for some info and help

    I don't see any shorted wires anywhere inside the machine, could the board that controls the reels stop buttons just be bad? Also, isn't there a modification that can be done for an "auto stop" feature so that you do not have to use the skill stop buttons? Are spare parts available for these pachislo games?

    Thanks,

    David

  8. #6
    SNORTARRIFIC! new in town's Avatar
    Join Date
    May 2007
    Location
    Jacksonville Florida
    Posts
    5,925
    Thanks
    12,836
    Thanks Received
    11,417

    Default Re: New member here and looking for some info and help

    Hi David and

    Welcome to PachiTalk

    Is this the Stop Board with the fuse that you replaced?

    PIC 1.jpg


    Or possibly this one?

    Oldfrnt2.jpg


    Super Planett was made by Yamasa in 1990.

    Is this the Pachi?



    I own AutoSlot which is the device to stop the Reels and Add Credits. A Link is below in my Signature if you want to learn
    about them.. An AutoSlot will not help you if the fuse on the Stop Board keeps Blowing. To try to trouble shoot this problem
    (if you have extra fuses, Should be 1 "AMP") Disconnect the Main large ribbon cable on the inner door PC Board. This runs
    all circuits from the inner door circuits to and from the Stop Board, Main Mother Board and power supply. Replace that fuse
    and power the Machine back up. Does the fuse still Blow? Let us know.

    It would be a help if you can post Pictures of the inside of your Pachi both the inner door and all the Goodies inside the case.

    And naturally the front of it. If you PM me your e mail address I can send you a general Manual on Yamasa Pachislo's.

    And if it turns out that your Stop Board is bad and is the first one pictured I have Replacement ones here.

    100_2923web.jpg 100_2924web.jpg 100_2925web.jpg

    72 Pachi's, 36 Pachinko's, 2 Pallots, 3 Pinn's & 2 Pachinko Bar Signs. Links to About Me: pachijunkie's Videos


  9. The following 3 users say "Thanks" to new in town


  10. #7
    Pachi Puro Card Shark's Avatar
    Join Date
    Jul 2011
    Location
    Midlothian, VA
    Posts
    12,779
    Thanks
    9,405
    Thanks Received
    5,617

    Default Re: New member here and looking for some info and help

    ​Welcome to Pachitalk!
    "Life consists not in holding good cards but in playing those you hold well."
    Pachiholic and Proud!!! サメ

Similar Threads

  1. New Member in UK
    By freddykrueger in forum Introduce yourself
    Replies: 10
    Last Post: 03-18-2012, 08:40 AM
  2. New Member!
    By naha13 in forum These are the days of our lives...
    Replies: 1
    Last Post: 03-09-2012, 11:54 PM
  3. New member here! HI!
    By Yoshimune in forum These are the days of our lives...
    Replies: 29
    Last Post: 01-29-2007, 02:03 AM
  4. Member info....
    By cmk8895 in forum These are the days of our lives...
    Replies: 9
    Last Post: 06-15-2005, 01:58 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •