Results 1 to 9 of 9

Thread: converter trouble

  1. #1
    proffesorpeter
    Lurker proffesorpeter's Avatar

    Default converter trouble

    hi there prof here- in the middle of an intense bonus game my machine just died- no power at the psu. not a problem with the machine, fault is obviously the ac-ac converter (is still red hot after powered down 45minutes)
    This is not really concerning me, but just to check- anyone else using converters out there- whats the watts rating?

  2. #2
    Pachi Puro Firewire's Avatar
    Join Date
    Nov 2004
    Location
    Midwest City, OK
    Posts
    2,670
    Thanks
    321
    Thanks Received
    286

    Default Re: converter trouble

    Wow, not good! They should be warm, but not red hot! Yikes.

    Check this site:

    http://www.powervolt.com/slotmachine...ormers_sm.html

    And since your in the UK I am not sure, but you might check this site:

    http://www.voltageconverters.com/japan_voltage.html
    Firewire

  3. #3
    Fever Hunter DiskDevil's Avatar
    Join Date
    May 2005
    Posts
    221
    Thanks
    7
    Thanks Received
    21

    Default Re: converter trouble

    Prof...

    The converter (transformer) in your machine should be warm to the touch. If it is red hot and you are not able to put your hand on it, I would change it out. These pachi are usually sent with a 5 amp transformer which is just marginal for proper operation. If you replace it, I would suggest a 6 or 8 amp. You then should have the power to play through a big bonus round without problems. Hope this helps.....
    Spin Luck * Super Black Jack * King Camel * Charlie's Angels * Gold X * Giga Fever * E.T.

  4. #4
    da shadow d mowery's Avatar
    Join Date
    Nov 2004
    Location
    Minneapolis Mn
    Posts
    2,154
    Thanks
    1,231
    Thanks Received
    804

    Default Re: converter trouble

    I think his problem is the converter that changes his 220 to 110 and hes using one way to small IE 100 watt used for shavers and small things , he need a 500 or 1000 to be safe as I used these and all others did also if stationed overseas like Germany Etc, Thers nothing wrong with the 110 to 24 vt or the reg 5 or 6 amp transformer in the machine ,, So much for my 2 cents worth
    These are my opinions and no body elses and you can't have them

  5. #5
    Fever Hunter pachitom's Avatar
    Join Date
    Mar 2005
    Location
    Ohio
    Posts
    156
    Thanks
    1
    Thanks Received
    1

    Default Re: converter trouble

    Prof… I have not checked the actual current of any of my Pachislos. But if the dealers that sell them state they use a 6 amp transformer in the ones that need to have a transformer added that would equal 144 watts knowing the secondary is 24 volts.

    The secondary watts and the primary watts is always the same on a transformer. So my reasoning says a power converter of say 150 watts should run it ok.



    I was looking at the link David R. provided showing the 120volt to 100 volt converters and was wondering if it might not be a good idea to get one to run all my Pachislos. The Pachislos are rated at 100 volts and it might be easier on them if they were powered at the correct voltage. Having six Pachislos the 2000 watt converter would handle them all just fine and the cost of $88.88 might be a good investment.



    If anyone else has any ideas on this please let me know.
    ****Fever Queen**LasVegas **BeastSapp**Azteca Legend**Sublime**

  6. #6
    Pachi Puro Firewire's Avatar
    Join Date
    Nov 2004
    Location
    Midwest City, OK
    Posts
    2,670
    Thanks
    321
    Thanks Received
    286

    Default Re: converter trouble

    Pachitom,

    I can't remember the thread, but I bought a "wattsup" watt meter last year and ran a few tests then sold the meter to someone here (can't remember who). Anyways, I think the final conclusion was 5+ machines might be cause to run a larger circuit.

    Honestly though, I can't remember the specs. Maybe a search for wattsup might find it again.
    Firewire

  7. #7
    proffesorpeter
    Lurker proffesorpeter's Avatar

    Default Re: converter trouble

    think the problems solved guys- 777heavens just posted a 150watt unit out to replace the dead one. I cannot thank him enough for his help- and i recommend him to all the brits out there with these machines, his customer service is second to NONE

  8. #8
    PachiTalk Hostess dattia's Avatar
    Join Date
    May 2005
    Location
    SE PA
    Posts
    11,810
    Thanks
    12,458
    Thanks Received
    11,503

    Default Re: converter trouble

    Good for you, you'll be playing again in no time!
    Dawn

  9. #9
    proffesorpeter
    Lurker proffesorpeter's Avatar

    Talking Re: converter trouble

    yep- and ill have hanabi and jackpot in a day or two to keep zero one company and nurse it back to health!!

Similar Threads

  1. Okay, now I'm in big trouble...
    By Siouxzan in forum Modern Pachinko
    Replies: 27
    Last Post: 12-29-2009, 10:31 AM
  2. anyone used a rust converter on parts?
    By mudfud in forum Vintage Pachinko
    Replies: 5
    Last Post: 10-14-2009, 12:01 AM
  3. Tug of War Trouble
    By Ikaria in forum Pachinko Technical Support Tickets
    Replies: 2
    Last Post: 07-19-2009, 09:05 PM
  4. Weird Converter
    By Sid in forum These are the days of our lives...
    Replies: 3
    Last Post: 01-09-2008, 10:23 AM
  5. converter trouble continued
    By proffesorpeter in forum Pachislo Modifications
    Replies: 2
    Last Post: 08-17-2005, 06:34 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •