NOOB? Hellowinning

[roady89]

Ok, My wife bought this thing at garage sale for 10 bucks.:lmao: After finding this great site I figured out what it was and what I needed to make it operational again (MAYBE). It has what I believe to be a universal hopper,(HIMECS M2Y) problem is there isn't a connector for it and I dont even know where it plugs in. It also needs a transformer (not a problem). Does anyone know where it plugs in and how does it wire up?

[Tulsa]

The hopper will plug into the power supply on the left, or what's left of the power supply and it appears to have a transformer on the right which also plugs into the power supply.

[RKnarr01]

welcome the hopper connector plugs into the plug on the back of the hopper and then into the top of the power supply. Is the power supply fully there?

[RKnarr01]

i dont have this model so im not sure but it looks like you might be missing a few circuit boards on the doors?

[roady89]

Yes the powersupply is fully there. I just took it apart to see how it was wired. Someone jerked the wires out of the transformer. Also I dont have the cable for the hopper, BUT I do have the skillz to make my own cable If I just knew the pinouts?

[RKnarr01]

www.stealthhomeamusement.com probably has the replacment cable. does the transformer work?

[roady89]

i dont have this model so im not sure but it looks like you might be missing a few circuit boards on the doors?

Everything seems to be there on the door. (what I mean is no empty plugs)

[roady89]

www.stealthhomeamusement.com probably has the replacment cable. does the transformer work?

No! there are some of the wires missing that come out of the transformer.

[roady89]

Man. talk about quick response time. You would have thought ya'll were waiting for me

[minnesotabrad]

You can also check with at-slots here on the forum. He may have the parts you need.

[roady89]

Ok thanks! but I cant PM him or send him an E-mail? Maybe he'll see this post.

[luckydog]

It like calling 911 here, always a quick response

[RKnarr01]

when you get a transformer make sure you get atleast a 5 amp, 8amps are the highest i believe you can get.

[roady89]

when you get a transformer make sure you get atleast a 5 amp, 8amps are the highest i believe you can get.

I'll order it from stealth, I was going to go to radioshack to see but I'll just get the right one and save the trouble.

[alstonj1]

for 10 bucks you got a deal if it had tokens you already made your money 's worth as for the cable looks like a five wire cable 2-wires to the motor and 3 to the ir sensor .
and you should have an open socket on the power supply to plug it in at the power supply looks like its turned the switch plate on top should be facing out the frount and the socket would be facing up then
.

[roady89]

for 10 bucks you got a deal if it had tokens you already made your money 's worth as for the cable looks like a five wire cable 2-wires to the motor and 3 to the ir sensor .
and you should have an open socket on the power supply to plug it in at

I'm gonna post some pics of the power supply and hopper. there are six on each. Give me a few minutes

[arbycoffee]

Milt can help you out I be sure.

Stealth Home Amusement (Pachinko/Pashislo)
Milt Cohen
1150 University Ave
Building #5
Rochester, NY 14607
888-798-1761 (Toll-Free), 585-271-3844 (Office), (demos@rochester.rr.com) E-mail
www.stealthhomeamusement.com, www.planethollyweb.com


Tell I sent you, arbycoffee

[roady89]

I'm gonna post some pics of the power supply and hopper. there are six on each. Give me a few minutes

I'm sorry I was mistaken, there are 7 pinouts on the powersupply and 8 on the hopper(LOOKS NEW).

[luckydog]

it looks like all you need is that cable,

Is the transformer connected to the power supply???

[alstonj1]

thats it , looks simalar to mine but its hard wired on the hopper side.
whats the wiring look like on the other side of the socket inside the supply ?
the motor connections should be a thicker wire on land if a pc board.