Sankyo Victory Frame Cyclic Usage conversion
Sankyo Victory Frame Cyclic Usage conversion
This will work on all Sankyo Victory Frames
Open the machine from the frame and rest it on a about 4" tall block, than unlock the two top black locks
Unlock the side black lock and unplug the first three connectors
white/gray
white/gray
yellow/orange & yellow
Shows them unplugged, now open the green transparent back frame
Unplug the three plugs in the picture
green/red & white
white/gray
green/gray
Show the lower part of the machine with the green frame open
Shows what needs to be cut away and replaced with angle plastic (I used the stuff you put on the corners of a wall to protect the corner). I marked with black magic marker to show the pieces.
Different view of the inside where the balls come down from the reward tray
Close up of the same
Closer view
Up close front view
Top view of tracks
Top view of tracks at the balls out tube for the reward tray
Outside view of the track
Inside view low of the track
This machine is American Pinball Action™ (Cyclic Usage), but if you add balls to the reward tray it will pay off as a parlor ready machine.
But you can play it empty and it plays the same as parlor ready.
"This is My Personal Opinion and no others"
Reply With Quote
