help identifying machine please

[sweetb]

Picked this up off Craigslist know nothing about it thx!!SmartSelect_20250107_194512_Facebook.jpgSmartSelect_20250107_194010_Facebook.jpg

[MrGneiss]

Looks to be a Daiichi CRレレレにおまかせ！ From 2004!!

The name is on the back.. If you use the Japanese name on google, youtube, etc.. You should get good results!!


https://daiichi777.jp/product/pachin...04/108/rerere/

https://www.p-world.co.jp/machine/database/3210

[sweetb]

Thanks... lots of questions... this unit powers up and the ball launcher works... explaint to me like I'm new... should this make sound and if so how do I turn it on? Also some times the balls fall out of these little chutes and currently roll away (after hitting the poorly played transformer) ... is there a buckthorn or something specific to go back.here to catch the balls? New to this thx20250108_110114.jpg

[sweetb]

And will 11.11 mm balls work? That's what amazon seems to sell

[Drunkenclam]

I would advise using the correct 11mm balls. Balls can be sourced from various sources.

[sweetb]

any idea how to turn the sound on? literally everything works - its just silent. no obvious way to turn on sound

[Drunkenclam]

It will be silent till a ball goes in the start pocket and the reels on the screen spin

[sweetb]

no sound still - is there a volume control?

[Drunkenclam]

There will be. Not sure where on that frame. Pop open the front door and see if the speakers are actuallyconnected. Pictures aren't clear enough to see the circuit boards on the back.

[sweetb]

I'll post Closeups soon. I can't find any easy way to get to the speaker it looks to be under the front ball area.

[Drunkenclam]

Turn the door key to the left to pop open the front panel.
There is normally a lever to swing open the front tray.
Speakers are normally in the top corners

[sweetb]

Here are closeups of the back. There is in fact a speaker in the top corner as you stared. It goes to the circuit board circled. There is a rheostat circled. Not sure its function I adjusted it a bit no sound so set it back in case it does something unwanted



720250108_153829.jpg20250108_153815.jpg20250108_153841.jpg20250108_153837.jpg20250108_153833.jpg20250108_153824.jpg20250108_153829.jpg20250108_153815.jpg20250108_153841.jpg20250108_153837.jpg20250108_153833.jpg20250108_153824.jpg

[MrGneiss]

Thanks... lots of questions... this unit powers up and the ball launcher works... explaint to me like I'm new... should this make sound and if so how do I turn it on? Also some times the balls fall out of these little chutes and currently roll away (after hitting the poorly played transformer) ... is there a buckthorn or something specific to go back.here to catch the balls? New to this thx20250108_110114.jpg

Balls that are shot come out the back, sometimes in more than one spot, and there is nothing built in to catch them.. In the parlor they go into the ball management system.. So we find any container that fits and can catch balls.. Tupperware type containers work well!!

In the pic in post #3 is there a connector that is unplugged??

[sweetb]

No connectors unplugged. That's the chute the balls come out of on the back.

I got a ball into one of the bonus holes and it definitely went into a different mode, but no sound.

[sweetb]

Hi - any ideas on the sound?

[sweetb]

Solved! Someone had cut the positive wire at the speaker! Sound! Also the Amazon 11.11 mm balls work!

[sweetb]

Machine is 100% thanks everyone for the help. Had to align a few pegs and build a frame but it's in and being played!

[MrGneiss]

Yay!!

I'm glad you got it working!!


This is the thing I was wondering about..

Plug.jpg

[Drunkenclam]

I think I saw that on a different picture. a 2 pin socket at a funny angle

[sweetb]

alright - good and bad news...everything works EXCEPT the payout motor doesn't turn / activate. It turns out that rheostat is actually the shaft of the payout motor and you can turn it to clear jams fro the payout ball chute. I had to dismantle the entire chute discovered someone had jammed it with a giant non standard steel ball. The chute is now clear and the balls from the payout tray fall through it if you manually turn the motor, but the motor doesnt turn on when any jackpots are hit - it never turns on. Any insight would be helpful.