Page 1 of 2 1 2 LastLast
Results 1 to 20 of 23

Thread: Captain Tsubasa CR unit and transformer recommendation in uk

  1. #1
    Tokie Owens keluar's Avatar
    Join Date
    Sep 2024
    Location
    UK
    Posts
    16
    Thanks
    3
    Thanks Received
    9

    Default Captain Tsubasa CR unit and transformer recommendation in uk

    Hi everyone, I bought the CR captain tsubasa pachinko by sensei R&D off auction site.
    Stuoidlt, i plugged the 24v cable into my step down (220-110v) and it seems it blew the stepdown fuse (connect) to mains(240v). The pachinko 20A fuse seems intact and the 110v fuse seems ok as well.


    I now noted i need a 110-24v transformer but i cant find any in UK. Do you all have some recommendations for the transformer to buy in uk20240927_150506.jpg

    Thank you in advance

    Attachment 109041Attachment 109042Attachment 109043Attachment 109044

  2. The following 2 users say "Thanks" to keluar


  3. #2
    Chicken Fried Steak takethecastle57's Avatar
    Join Date
    Aug 2005
    Location
    Monterey , Ca
    Posts
    21,926
    Thanks
    27,287
    Thanks Received
    12,234

    Default Re: Captain Tsubasa CR unit and transformer recommendation in uk

    and biscuits


    Here is a cctv power supply 220vac stepped down to 24 vac

    https://www.ebay.co.uk/itm/256475439....c101506.m1851
    When things don't go right the 1st time , Step back ,Take a break and come back renewed. RGS

  4. #3
    I was thrown out of Top Gear Drunkenclam's Avatar
    Join Date
    May 2010
    Location
    Guildford, Surrey
    Posts
    28,957
    Thanks
    13,706
    Thanks Received
    19,268

    Default Re: Captain Tsubasa CR unit and transformer recommendation in uk

    Does make more sense to use a 240-24v transformer. I get mine from Farnell. They will also have 110-12/24v as well
    Ian #UKPachinko

  5. #4
    Tokie Owens keluar's Avatar
    Join Date
    Sep 2024
    Location
    UK
    Posts
    16
    Thanks
    3
    Thanks Received
    9

    Default Re: Captain Tsubasa CR unit and transformer recommendation in uk

    Wow. Life saver. It will work on my pachinko? Do i need to modify it

  6. #5
    Tokie Owens keluar's Avatar
    Join Date
    Sep 2024
    Location
    UK
    Posts
    16
    Thanks
    3
    Thanks Received
    9

    Default Re: Captain Tsubasa CR unit and transformer recommendation in uk

    Any link?

  7. #6
    I was thrown out of Top Gear Drunkenclam's Avatar
    Join Date
    May 2010
    Location
    Guildford, Surrey
    Posts
    28,957
    Thanks
    13,706
    Thanks Received
    19,268

    Default Re: Captain Tsubasa CR unit and transformer recommendation in uk

    No idea yet. I'm at work. However I can't give any advice/links till you can tell me the va rating of the machine. I expect it to be between 200 to 250. Look on the back on the circuit board covers its normally printed on one of them.
    Ian #UKPachinko

  8. #7
    I was thrown out of Top Gear Drunkenclam's Avatar
    Join Date
    May 2010
    Location
    Guildford, Surrey
    Posts
    28,957
    Thanks
    13,706
    Thanks Received
    19,268

    Default Re: Captain Tsubasa CR unit and transformer recommendation in uk

    according to the picture in this auction listing its rated at 240va







    https://uk.farnell.com/vigortronix/v...24v/dp/2817701
    https://uk.farnell.com/vigortronix/v...12v/dp/2817698

    These 2 are suitable. Note the voltage as wiring isn't just 2 wires in/out.
    Also the 300va ones are under half the price of the 250va ones.

    if you want to go nuts and power 2 machines

    https://uk.farnell.com/vigortronix/v...24v/dp/2817706

    Check to see if they come with the monting plate and rubber discs.
    Ian #UKPachinko

  9. The following user says "Thanks" to Drunkenclam


  10. #8
    Tokie Owens keluar's Avatar
    Join Date
    Sep 2024
    Location
    UK
    Posts
    16
    Thanks
    3
    Thanks Received
    9

    Default Re: Captain Tsubasa CR unit and transformer recommendation in uk

    20240927_170617.jpglooks like 240va.i have bought this one suggestsd by the member takethecastle57. https://www.ebay.co.uk/itm/256475439....c101506.m1851
    Would it still be ok?
    The link and comment you send just went above my head. Do i have to rewire?
    I would like to get just 1 pachinko version. Which one would you suggest and thanks in advance.

  11. #9
    Tokie Owens keluar's Avatar
    Join Date
    Sep 2024
    Location
    UK
    Posts
    16
    Thanks
    3
    Thanks Received
    9

    Default Re: Captain Tsubasa CR unit and transformer recommendation in uk

    20240927_170617.jpglooks like 240va.i have bought this one suggestsd by the member takethecastle57. https://www.ebay.co.uk/itm/256475439....c101506.m1851
    Would it still be ok?
    The link and comment you send just went above my head. Do i have to rewire?
    I would like to get just 1 pachinko version. Which one would you suggest and thanks in advance.

  12. #10
    Tokie Owens keluar's Avatar
    Join Date
    Sep 2024
    Location
    UK
    Posts
    16
    Thanks
    3
    Thanks Received
    9

    Default Re: Captain Tsubasa CR unit and transformer recommendation in uk

    What wire gauge should I use and is there a guide on wiring?

  13. #11
    Tokie Owens keluar's Avatar
    Join Date
    Sep 2024
    Location
    UK
    Posts
    16
    Thanks
    3
    Thanks Received
    9

    Default Re: Captain Tsubasa CR unit and transformer recommendation in uk

    I have bought the unit suggested by takethecastle57
    I believe it is this one. would it be ok?
    https://media.pelco.com/wp-content/u...ion-Manual.pdf

  14. The following user says "Thanks" to keluar


  15. #12
    I was thrown out of Top Gear Drunkenclam's Avatar
    Join Date
    May 2010
    Location
    Guildford, Surrey
    Posts
    28,957
    Thanks
    13,706
    Thanks Received
    19,268

    Default Re: Captain Tsubasa CR unit and transformer recommendation in uk

    Quote Originally Posted by keluar View Post
    20240927_170617.jpglooks like 240va.i have bought this one suggestsd by the member takethecastle57. https://www.ebay.co.uk/itm/256475439....c101506.m1851
    Would it still be ok?
    The link and comment you send just went above my head. Do i have to rewire?
    I would like to get just 1 pachinko version. Which one would you suggest and thanks in advance.
    That ebay one says its 41 watt. which is way to small.

    The ones I use like in my links can be wired different ways to get different voltages. It depends on how you join the wires. Its a bit like batteries can either be joined in series to increase the voltage. or parrallel to increase the power.

    As for gauge.

    240va is 10A at 24volts. so standard 13A mains flex should be fine.
    Ian #UKPachinko

  16. #13
    Tokie Owens keluar's Avatar
    Join Date
    Sep 2024
    Location
    UK
    Posts
    16
    Thanks
    3
    Thanks Received
    9

    Default Re: Captain Tsubasa CR unit and transformer recommendation in uk

    are you able to show me how it should be wired? and which of your link i should be getting then?

  17. #14
    I was thrown out of Top Gear Drunkenclam's Avatar
    Join Date
    May 2010
    Location
    Guildford, Surrey
    Posts
    28,957
    Thanks
    13,706
    Thanks Received
    19,268

    Default Re: Captain Tsubasa CR unit and transformer recommendation in uk

    the 2x 12v one is safer. because if you mess up. you don't end up with 48v

    If so.

    Primary side.

    From a fused plus lead. (obviously discconected from the mains)

    Connect
    brown (LIVE) from your flex to brown on the transformer.
    blue (Neutral) from your flex to blue on the transformer.
    join the grey and violet together on the transformer (run at 240v not 110)

    Secondary side

    On the lead from the machine

    one wire to orange on the transformer.
    the other wire to red on the transfomer.
    join the yellow and black together.


    Mains voltage is dangerous. make sure the transfomer is secured and all the connections are protected.
    Ian #UKPachinko

  18. The following 3 users say "Thanks" to Drunkenclam


  19. #15
    Tokie Owens keluar's Avatar
    Join Date
    Sep 2024
    Location
    UK
    Posts
    16
    Thanks
    3
    Thanks Received
    9

    Default Re: Captain Tsubasa CR unit and transformer recommendation in uk

    Thanks. I shall try.
    Is there any video or guide on wiring? picture?
    Or is there any pre made product for sale?
    I noted my unit has a socket to plug the wire in and I am not sure I need to reuse that socket or try to find a new one for sale.

  20. #16
    Pachi Puro lotsoballs's Avatar
    Join Date
    Nov 2014
    Location
    Charlotte NC
    Posts
    2,218
    Thanks
    1,549
    Thanks Received
    4,222

    Default Re: Captain Tsubasa CR unit and transformer recommendation in uk

    If you aren’t comfortable with wiring your own transformer; another option is buy one pre-wired from a pachinko wholesaler/vendor.

    Aki at JT Comatz trading company (based in Taiwan) might be able to help? Just have to specify the voltage to them you need for your country. Normally they charge $60 (plus shipping). All the work is done for you so it’s simply “plug and play” your machine into the 24v side/outlet cord of the transformer. They ship worldwide.


    The ones they sell are 8 amp; adequate for newer machines; very heavy; they don’t get as hot as 5 amp smaller transformers that come from some other pachinko vendors.




    Sent from my iPhone using Tapatalk

  21. The following 4 users say "Thanks" to lotsoballs


  22. #17
    I was thrown out of Top Gear Drunkenclam's Avatar
    Join Date
    May 2010
    Location
    Guildford, Surrey
    Posts
    28,957
    Thanks
    13,706
    Thanks Received
    19,268

    Default Re: Captain Tsubasa CR unit and transformer recommendation in uk

    I'll say it every time. I advise against using under powered transformers to run a machine. I have had numerous issues with voltage drops causing machines to reset and heat from under rated transformers. Seems to affect the 240v ones more than the 110v ones. Maybe due to double the amount of copper in them.

    I don't know of any off the shelf ready made transformers. I made some years ago. but its not worth the hassle and regulations involved with making them.
    Ian #UKPachinko

  23. The following 3 users say "Thanks" to Drunkenclam


  24. #18
    Tokie Owens keluar's Avatar
    Join Date
    Sep 2024
    Location
    UK
    Posts
    16
    Thanks
    3
    Thanks Received
    9

    Default Re: Captain Tsubasa CR unit and transformer recommendation in uk

    At the moment, I have contacted Aki at JT Comatz trading company and she quoted me of $60 USD +delivery for their transformer.
    I am more inclined to go with the pre built one although it is tempting to built one myself.


    87848d90-ffd9-4ba5-892c-32668dd2467f.jpg

  25. The following 3 users say "Thanks" to keluar


  26. #19
    Tokie Owens keluar's Avatar
    Join Date
    Sep 2024
    Location
    UK
    Posts
    16
    Thanks
    3
    Thanks Received
    9

    Default Re: Captain Tsubasa CR unit and transformer recommendation in uk

    Quote Originally Posted by Drunkenclam View Post
    the 2x 12v one is safer. because if you mess up. you don't end up with 48v

    If so.

    Primary side.

    From a fused plus lead. (obviously discconected from the mains)

    Connect
    brown (LIVE) from your flex to brown on the transformer.
    blue (Neutral) from your flex to blue on the transformer.
    join the grey and violet together on the transformer (run at 240v not 110)

    Secondary side

    On the lead from the machine

    one wire to orange on the transformer.
    the other wire to red on the transfomer.
    join the yellow and black together.


    Mains voltage is dangerous. make sure the transfomer is secured and all the connections are protected.
    Thank you very much for your guidance. I at the end decide to go with the DIY route following your advice. It worked like a treat. There was some initial C90 top connection error which i later found out it is related to the physical banner. The transformer did outout 27v instead of 24v
    [20241003_171011.jpg=CONFIG]109072[/ATTACH]loop
    Attached Images Attached Images
    Last edited by keluar; 10-03-2024 at 02:05 PM.

  27. The following user says "Thanks" to keluar


  28. #20
    Stuey - The RADministrator MrGneiss's Avatar
    Join Date
    Apr 2005
    Location
    Indianapolis, IN
    Posts
    39,661
    Thanks
    69,107
    Thanks Received
    46,228

    Default Re: Captain Tsubasa CR unit and transformer recommendation in uk

    Yay!!

    "Blowing smoke rings at the moon."

Page 1 of 2 1 2 LastLast

Similar Threads

  1. Captain Tsubasa CR unit and transformer recommendation in uk
    By keluar in forum Pachinko Technical Support Tickets
    Replies: 1
    Last Post: 09-27-2024, 08:02 PM
  2. Replies: 10
    Last Post: 06-17-2022, 02:10 AM
  3. Replies: 2
    Last Post: 12-22-2021, 05:21 AM
  4. Replies: 0
    Last Post: 09-05-2020, 10:15 PM
  5. Restoration recommendation
    By porktyme in forum Vintage Pachinko
    Replies: 11
    Last Post: 05-25-2010, 09:15 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •