Page 1 of 2 1 2 LastLast
Results 1 to 20 of 24

Thread: New machine today Help me identify the name

  1. #1
    Blind Shooter qman97's Avatar
    Join Date
    Dec 2022
    Location
    Raleigh
    Posts
    37
    Thanks
    0
    Thanks Received
    22

    Default New machine today Help me identify the name

    Hi all!

    as the title said, I picked up a new machine today and it has an error code E7. I’m looking for the game name while I work on clearing out the code

    any help would’ve awesome

    john
    B545D968-2030-41B4-8C39-296EFBE8051E.jpg7F8193E0-11F3-401A-9EBC-52B1D0FD315A.jpeg

  2. The following 2 users say "Thanks" to qman97


  3. #2
    Gibisans - Japan West compirate's Avatar
    Join Date
    Feb 2005
    Location
    Down in da Holler, WV
    Posts
    9,122
    Thanks
    8,768
    Thanks Received
    18,470

    Default Re: New machine today Help me identify the name

    トップをゐらえ2
    Get the top 2

    人生は恐れなければ、とても素晴らしいものなんだよ。
    人生に必要なもの。それは勇気と想像力、そして少しのお金だ。

  4. The following 3 users say "Thanks" to compirate


  5. #3
    Kungishi Wayne-Ooo's Avatar
    Join Date
    Oct 2011
    Location
    Lebanon, Indiana
    Posts
    1,861
    Thanks
    2,401
    Thanks Received
    5,170

    Default Re: New machine today Help me identify the name

    Screenshot 2024-09-12 002724.png

    I'm guessing the E-7 error code is because the machine hasn't been powered ON for awhile.

    A full reset should clear the code.

    Heiwa and Olympia are the same company and here is a list of error codes for these manufacturers.

    Screenshot 2024-09-12 003143.png

    Changing Odds & Full Reset PACHITALK.png
    Last edited by Wayne-Ooo; 09-12-2024 at 12:45 AM.
    What if...​the ​HOKEY POKEY, is what it's all about?

  6. The following 6 users say "Thanks" to Wayne-Ooo


  7. #4
    Blind Shooter qman97's Avatar
    Join Date
    Dec 2022
    Location
    Raleigh
    Posts
    37
    Thanks
    0
    Thanks Received
    22

    Default Re: New machine today Help me identify the name

    Quote Originally Posted by compirate View Post

    TY appreciate the assist!

  8. #5
    Blind Shooter qman97's Avatar
    Join Date
    Dec 2022
    Location
    Raleigh
    Posts
    37
    Thanks
    0
    Thanks Received
    22

    Default Re: New machine today Help me identify the name

    Quote Originally Posted by Wayne-Ooo View Post
    Screenshot 2024-09-12 002724.png no

    I'm guessing the E-7 error code is because the machine hasn't been powered ON for awhile.

    A full reset should clear the code.

    Heiwa and Olympia are the same company and here is a list of error codes for these manufacturers.

    Screenshot 2024-09-12 003143.png

    Changing Odds & Full Reset PACHITALK.png
    TY!

    I tried the reset yesterday but could not get it to change. I did notice on the board on the side (see pic) the bottom relay clicks about 5 times and the bottom led light (F07)flashes on power up. The led does not stay on.

    I also noticed on the main board I can light all test led’s except #9 that is listed as the hopper sensor. I cleared a jammed coin from it but still cannot get it to light.

    I’ll try the reset again tonight and see what happens. I’m thinking that relay on the side board ‘external centralized terminal board’ has a bad relay??

    john

    B583A440-0793-4F05-84E1-9E853FB5F0CE.jpeg

  9. The following 3 users say "Thanks" to qman97


  10. #6
    I was thrown out of Top Gear Drunkenclam's Avatar
    Join Date
    May 2010
    Location
    Guildford, Surrey
    Posts
    28,957
    Thanks
    13,706
    Thanks Received
    19,268

    Default Re: New machine today Help me identify the name

    data counter output board. shouldn't effect operation. even if not there.

    Is it the hopper full sensor (2 prongs on the back to the right of the hopper)
    Ian #UKPachinko

  11. The following user says "Thanks" to Drunkenclam


  12. #7
    Blind Shooter qman97's Avatar
    Join Date
    Dec 2022
    Location
    Raleigh
    Posts
    37
    Thanks
    0
    Thanks Received
    22

    Default Re: New machine today Help me identify the name

    Quote Originally Posted by Drunkenclam View Post
    data counter output board. shouldn't effect operation. even if not there.

    Is it the hopper full sensor (2 prongs on the back to the right of the hopper)
    interesting on that data counter. I actually tried starting and resetting with and without that board hooked up. No luck.

    checked the hopper full sensor and it looks fine no coins in the overflow bin and both prongs isolated, not touching anything.

    It’s weird I cannot get it to go into reset mode? I have tried multiple times to get it to reset but it is just stuck on E7




    john

  13. #8
    I was thrown out of Top Gear Drunkenclam's Avatar
    Join Date
    May 2010
    Location
    Guildford, Surrey
    Posts
    28,957
    Thanks
    13,706
    Thanks Received
    19,268

    Default Re: New machine today Help me identify the name

    Any difference with the machine when you turn it on with the settings key in either position?

    It has been known for the switch or wiring to be faulty.
    Ian #UKPachinko

  14. #9
    Blind Shooter qman97's Avatar
    Join Date
    Dec 2022
    Location
    Raleigh
    Posts
    37
    Thanks
    0
    Thanks Received
    22

    Default Re: New machine today Help me identify the name

    Quote Originally Posted by Drunkenclam View Post
    Any difference with the machine when you turn it on with the settings key in either position?

    It has been known for the switch or wiring to be faulty.

    No, no difference either way. I was going to take a look at that wiring next, it just acts like it won’t go into reset mode no matter what.

  15. #10
    Blind Shooter qman97's Avatar
    Join Date
    Dec 2022
    Location
    Raleigh
    Posts
    37
    Thanks
    0
    Thanks Received
    22

    Default Re: New machine today Help me identify the name

    Still nothing on this game. Hmmmmm

    i cannot get the E7 error to clear no matter what I do. I did notice there are doors on the video screen that are currently open. I don’t know if they should be open or closed.

    i removed the PS and looked at the key switch and everything looks good, solder joints look good there are no wires from the key switch

    im stumped at where to go next ��

    john

  16. #11
    I was thrown out of Top Gear Drunkenclam's Avatar
    Join Date
    May 2010
    Location
    Guildford, Surrey
    Posts
    28,957
    Thanks
    13,706
    Thanks Received
    19,268

    Default Re: New machine today Help me identify the name

    Quote Originally Posted by qman97 View Post
    there are no wires from the key switch

    This line confuses me. Is the key switch attached direct to the pcb?
    Ian #UKPachinko

  17. The following user says "Thanks" to Drunkenclam


  18. #12
    Blind Shooter qman97's Avatar
    Join Date
    Dec 2022
    Location
    Raleigh
    Posts
    37
    Thanks
    0
    Thanks Received
    22

    Default Re: New machine today Help me identify the name

    Quote Originally Posted by Drunkenclam View Post
    This line confuses me. Is the key switch attached direct to the pcb?

    yes, it is attached directly to the main power supply board. When you turn the key to ‘ON’ it engages a push button switch also soldered to the main board. The switch is testing out good

    john

  19. #13
    Sandwich Shooter bjab's Avatar
    Join Date
    Sep 2023
    Location
    United States
    Posts
    393
    Thanks
    2
    Thanks Received
    58

    Default Re: New machine today Help me identify the name

    So you said you removed 1 jammed token from the hopper, correct ? I had a machine that had the E7 error code on it when I bought it. I found the code was refering to a hopper jam, so i took the hopper out , emptied all the tokens out and it looked fine. I looked closer and saw a very slight edge of a token, in the recessed area (round token size recess) where the tokens on the bottom of the hopper fall into. That token was under a part of the bottom plate that I couldn't see because it was spun in between where you couldn't see it. I manually spun the bottom coin plate that turns, and saw a token there. It was stuck with some kind of sticky substance in the token hole. I had to pry it out because it was stuck with the sticky stuff. I then turned the plate a little more on around and there was another coin stuck in a different hole with more sticky stuff ! I decided to take the hopper completely apart and throughly clean it. After putting it back together I filled the hopper with tokens and did a full reset . Good news.... no more E7 code. I'm just sharing what I found. Maybe check what I said just in case you have a jammed token you overlooked.

  20. #14
    Blind Shooter qman97's Avatar
    Join Date
    Dec 2022
    Location
    Raleigh
    Posts
    37
    Thanks
    0
    Thanks Received
    22

    Default Re: New machine today Help me identify the name

    Quote Originally Posted by bjab View Post
    So you said you removed 1 jammed token from the hopper, correct ? I had a machine that had the E7 error code on it when I bought it. I found the code was refering to a hopper jam, so i took the hopper out , emptied all the tokens out and it looked fine. I looked closer and saw a very slight edge of a token, in the recessed area (round token size recess) where the tokens on the bottom of the hopper fall into. That token was under a part of the bottom plate that I couldn't see because it was spun in between where you couldn't see it. I manually spun the bottom coin plate that turns, and saw a token there. It was stuck with some kind of sticky substance in the token hole. I had to pry it out because it was stuck with the sticky stuff. I then turned the plate a little more on around and there was another coin stuck in a different hole with more sticky stuff ! I decided to take the hopper completely apart and throughly clean it. After putting it back together I filled the hopper with tokens and did a full reset . Good news.... no more E7 code. I'm just sharing what I found. Maybe check what I said just in case you have a jammed token you overlooked.

    appreciate the info and reply!

    i disassembled, cleaned, and reassembled last night thinking and hoping the same thing you said but alas no luck 😕

    it is weird, it’s just stuck on E7

  21. #15
    Sandwich Shooter bjab's Avatar
    Join Date
    Sep 2023
    Location
    United States
    Posts
    393
    Thanks
    2
    Thanks Received
    58

    Default Re: New machine today Help me identify the name

    It must be the hopper sensor is bad

  22. #16
    Blind Shooter qman97's Avatar
    Join Date
    Dec 2022
    Location
    Raleigh
    Posts
    37
    Thanks
    0
    Thanks Received
    22

    Default Re: New machine today Help me identify the name

    Quote Originally Posted by bjab View Post
    It must be the hopper sensor is bad

    this machine has a Main Board LED Display List and the sensor LED pulses when I manually turn the hopper and it ejects a coin. it tests out fine

    I am thinking one of the relays is bad in that stop reel board causing issues with the resetting. I may change them out.

    I admit I am stumped and I’m usually good at tracking down the issue and fixing. Every time I power it up I can hear the front screen door motors energize and the relay and LED at position F07 click/blink 3 times rapidly and go out. it does this no matter what my key position is on the main PU.

    E7 on this machine is a backup error code that is supposedly reset by performing a settings change. I can’t seem to get it to go into the reset mode for some reason

  23. #17
    I was thrown out of Top Gear Drunkenclam's Avatar
    Join Date
    May 2010
    Location
    Guildford, Surrey
    Posts
    28,957
    Thanks
    13,706
    Thanks Received
    19,268

    Default Re: New machine today Help me identify the name

    are there diagnositic leds on the motherboard, relating to all buttons and sensors?
    Ian #UKPachinko

  24. #18
    Blind Shooter qman97's Avatar
    Join Date
    Dec 2022
    Location
    Raleigh
    Posts
    37
    Thanks
    0
    Thanks Received
    22

    Default Re: New machine today Help me identify the name

    Quote Originally Posted by Drunkenclam View Post
    are there diagnositic leds on the motherboard, relating to all buttons and sensors?
    Yes, and they are all working correctly

    I found a battery in the board with the ROM chips. the original tamper tag is intact on the box so I’m wondering if replacing the battery would solve the issue of the Back-Up error.

    not sure what size this battery is? Stamped 71 and has a blue boarder. Is see no other numbers on it
    E3A9589B-EC16-4445-A6F2-B1B918B0E402.jpeg
    Attached Images Attached Images

  25. #19
    Sandwich Shooter bjab's Avatar
    Join Date
    Sep 2023
    Location
    United States
    Posts
    393
    Thanks
    2
    Thanks Received
    58

    Default Re: New machine today Help me identify the name

    Did you check the voltage of it in place ?

  26. #20
    Blind Shooter qman97's Avatar
    Join Date
    Dec 2022
    Location
    Raleigh
    Posts
    37
    Thanks
    0
    Thanks Received
    22

    Default Re: New machine today Help me identify the name

    Quote Originally Posted by bjab View Post
    Did you check the voltage of it in place ?
    not yet. I’m going to leave the game plugged in overnight and see if it has any affect on things. I am not sure when the last time the game was plugged in before I got it.

    I’ll give it a good 24 hours plugged in and reporter back

Page 1 of 2 1 2 LastLast

Similar Threads

  1. Please help identify this machine!!
    By Defcon1 in forum Modern Pachinko
    Replies: 42
    Last Post: 09-04-2023, 09:53 PM
  2. Help identify this machine please
    By gringostar in forum Vendors & Manufacturers Pachislo
    Replies: 0
    Last Post: 09-12-2019, 01:10 PM
  3. Help identify a machine?
    By rmharris in forum Arrangeball
    Replies: 17
    Last Post: 04-09-2017, 05:00 PM
  4. Help identify my machine please...
    By thisismyusername in forum Vintage Pachinko
    Replies: 2
    Last Post: 10-29-2012, 02:28 PM
  5. Help identify this machine
    By phunk311 in forum Modern Pachinko
    Replies: 5
    Last Post: 03-31-2010, 02:09 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •