Results 1 to 14 of 14

Thread: Need help with wiring. Victory okumurayuki monaku

  1. #1
    Tokie Owens Tman's Avatar
    Join Date
    Nov 2023
    Location
    Nys
    Posts
    8
    Thanks
    4
    Thanks Received
    7

    Default Need help with wiring. Victory okumurayuki monaku

    Ive managed to test and see that all lights work. Someone upgraded the red ball out light to led at some point. I can take the board out if it makes it easier to figure out. I found this in a free pile last week while out scrapping had no clue what it was and now im hooked.
    Attached Images Attached Images
    Last edited by Tman; 11-13-2023 at 11:49 AM.

  2. The following 3 users say "Thanks" to Tman


  3. #2
    Sandwich Shooter SibSr's Avatar
    Join Date
    Nov 2020
    Location
    Wesley Chapel, Florida
    Posts
    389
    Thanks
    208
    Thanks Received
    1,026

    Default Re: Need help with wiring. Victory okumurayuki monaku

    That's a really nice machine for a junk pile find. I have 3 of these machines so I am going to go into the stash and get some pics for you.

    Here is the wiring diagram on the best of them.



    Sent from my LG-H872 using Tapatalk

  4. The following 2 users say "Thanks" to SibSr


  5. #3
    Chicken Fried Steak takethecastle57's Avatar
    Join Date
    Aug 2005
    Location
    Monterey , Ca
    Posts
    20,569
    Thanks
    25,131
    Thanks Received
    11,656

    Default Re: Need help with wiring. Victory okumurayuki monaku

    and biscuits
    When things don't go right the 1st time , Step back ,Take a break and come back renewed. RGS

  6. The following user says "Thanks" to takethecastle57


  7. #4
    Stuey - The RADministrator MrGneiss's Avatar
    Join Date
    Apr 2005
    Location
    Indianapolis, IN
    Posts
    37,484
    Thanks
    67,033
    Thanks Received
    44,095

    Default Re: Need help with wiring. Victory okumurayuki monaku

    WELCOME!!!

    "Blowing smoke rings at the moon."

  8. The following user says "Thanks" to MrGneiss


  9. #5
    Tokie Owens Tman's Avatar
    Join Date
    Nov 2023
    Location
    Nys
    Posts
    8
    Thanks
    4
    Thanks Received
    7

    Default Re: Need help with wiring. Victory okumurayuki monaku

    One of the wires was ripped out of the battery harness. Replacing that fixed it.

  10. The following 3 users say "Thanks" to Tman


  11. #6
    Tokie Owens Tman's Avatar
    Join Date
    Nov 2023
    Location
    Nys
    Posts
    8
    Thanks
    4
    Thanks Received
    7

    Default Re: Need help with wiring. Victory okumurayuki monaku

    Can you post some pics of yours front and back sibsr? Its got a slightly broken winning tray. And the feed tray on the back needs some help. See if i can find parts or fixes.

  12. #7
    Sandwich Shooter SibSr's Avatar
    Join Date
    Nov 2020
    Location
    Wesley Chapel, Florida
    Posts
    389
    Thanks
    208
    Thanks Received
    1,026

    Default Re: Need help with wiring. Victory okumurayuki monaku

    Here is the best one...my first eBay purchase 3 years ago bigfish2.jpg bigfish2back.jpg



    It appears that the front trays on these machines are delicate as both my other machines have broken ones greenbackOki2.jpg missing the ashtray also greenbackOkiclose.jpg greenbackOkirear.jpg



    This one is a recent pickup cheapOki.jpg and missing ashtray as well cheapOkiclose.jpg while the front looks very similar to the others, the back is totally different cheapOkirear.jpg

  13. The following 4 users say "Thanks" to SibSr


  14. #8
    Sandwich Shooter SibSr's Avatar
    Join Date
    Nov 2020
    Location
    Wesley Chapel, Florida
    Posts
    389
    Thanks
    208
    Thanks Received
    1,026

    Default Re: Need help with wiring. Victory okumurayuki monaku

    https://www.pachitalk.com/forums/sho...Vanguard-NV100

    Looks through this thread and see if you would be interested in having me repair your trays rather than searching for what are rare parts, or buying a second machine to steal parts from.

  15. The following 3 users say "Thanks" to SibSr


  16. #9
    Tokie Owens Tman's Avatar
    Join Date
    Nov 2023
    Location
    Nys
    Posts
    8
    Thanks
    4
    Thanks Received
    7

    Default Re: Need help with wiring. Victory okumurayuki monaku

    Quote Originally Posted by SibSr View Post
    https://www.pachitalk.com/forums/sho...Vanguard-NV100

    Looks through this thread and see if you would be interested in having me repair your trays rather than searching for what are rare parts, or buying a second machine to steal parts from.
    I see you do good work on the trays. I put some pics below. Whats the best way to ship them? I also have a few cracks in the plastic behind the rear tray you can see below and im missing one of the swinging things(not sure what the technical name is for it. I think superglue is probably the best option for the cracks?

    IMG_3315.jpgIMG_3314.jpgIMG_3316.jpgIMG_3313.jpegIMG_3312.jpegIMG_3311.jpgIMG_3298.jpgIMG_3299.jpgIMG_3303.jpg

  17. The following user says "Thanks" to Tman


  18. #10
    Sandwich Shooter SibSr's Avatar
    Join Date
    Nov 2020
    Location
    Wesley Chapel, Florida
    Posts
    389
    Thanks
    208
    Thanks Received
    1,026

    Default Re: Need help with wiring. Victory okumurayuki monaku

    Make sure you use a box big enough to allow for a couple layers of bubble wrap around them, as the delivery process can be rough.

    Yes, I use a thicker superglue from a hobby shop as an adhesive/gap filler since the original parts and my repair plastic are two different types of plastic. I use Styrene for repairs which is the same plastic a model car would be made of.
    Styrene is softer and more workable than ABS which makes it good for repairing the corners. ABS is a stronger more rigid plastic that is a great choice for the machine builder, but it is also more brittle, especially with age and UV expose.

  19. The following 3 users say "Thanks" to SibSr


  20. #11
    Tokie Owens Tman's Avatar
    Join Date
    Nov 2023
    Location
    Nys
    Posts
    8
    Thanks
    4
    Thanks Received
    7

    Default Re: Need help with wiring. Victory okumurayuki monaku

    Quote Originally Posted by SibSr View Post
    Make sure you use a box big enough to allow for a couple layers of bubble wrap around them, as the delivery process can be rough.

    Yes, I use a thicker superglue from a hobby shop as an adhesive/gap filler since the original parts and my repair plastic are two different types of plastic. I use Styrene for repairs which is the same plastic a model car would be made of.
    Styrene is softer and more workable than ABS which makes it good for repairing the corners. ABS is a stronger more rigid plastic that is a great choice for the machine builder, but it is also more brittle, especially with age and UV expose.
    can you pm me where i can send so you can do ur magic on my trays? Im just getting together some packing material.

  21. #12
    Sandwich Shooter SibSr's Avatar
    Join Date
    Nov 2020
    Location
    Wesley Chapel, Florida
    Posts
    389
    Thanks
    208
    Thanks Received
    1,026

    Default Re: Need help with wiring. Victory okumurayuki monaku

    Making progress on the missing material.

    okifronttray1.jpg okifronttray2.jpg okireartray2.jpg

  22. The following 4 users say "Thanks" to SibSr


  23. #13
    Tokie Owens Tman's Avatar
    Join Date
    Nov 2023
    Location
    Nys
    Posts
    8
    Thanks
    4
    Thanks Received
    7

    Default Re: Need help with wiring. Victory okumurayuki monaku

    Quote Originally Posted by SibSr View Post
    Making progress on the missing material.

    okifronttray1.jpg okifronttray2.jpg okireartray2.jpg
    Looking good


    Sent from my iPhone using Tapatalk

  24. #14
    Sandwich Shooter SibSr's Avatar
    Join Date
    Nov 2020
    Location
    Wesley Chapel, Florida
    Posts
    389
    Thanks
    208
    Thanks Received
    1,026

    Default Re: Need help with wiring. Victory okumurayuki monaku

    The rear tray is close to being done. I'm not painting the whole thing, just the corner. The color was close but still slightly off, so I aged it some which helped. Might add a little more color to darken it slightly.

    The front tray is close on the outside, but a couple pin holes to fill on the inside. Here it is after a primer coat this afternoon.



    Sent from my LG-H872 using Tapatalk

  25. The following 3 users say "Thanks" to SibSr


Similar Threads

  1. Victory Okumurayuki Restoration
    By MagicDan in forum Vintage Pachinko
    Replies: 33
    Last Post: 11-26-2023, 01:35 AM
  2. Victory Okumurayuki $12.99
    By MrGneiss in forum eBay - General Auction listings
    Replies: 4
    Last Post: 08-25-2023, 03:35 AM
  3. Okumurayuki Victory - Monako - Motorbike?
    By gnome73 in forum Vintage Pachinko
    Replies: 14
    Last Post: 01-31-2019, 10:08 AM
  4. Okumurayuki Victory - Monako
    By CarlW in forum Vintage Pachinko
    Replies: 4
    Last Post: 07-13-2011, 07:32 PM
  5. Unusual Vintage - Okumurayuki Victory
    By JACKSJE4 in forum Vintage Pachinko
    Replies: 22
    Last Post: 11-01-2010, 12:59 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •