Results 1 to 12 of 12

Thread: Daiichi Battle Counter Wiring to Daiichi Dynamite King in Okinawa Machine

  1. #1
    Tokie Owens Pancakes's Avatar
    Join Date
    May 2023
    Location
    SC
    Posts
    4
    Thanks
    3
    Thanks Received
    1

    Smile Daiichi Battle Counter Wiring to Daiichi Dynamite King in Okinawa Machine

    Hello,

    First of all, thank you for this amazing forum! Iím new here so please forgive any breaches in protocol


    After reading this: https://www.pachitalk.com/forums/sho...unter-hook-ups

    And then this: https://www.pachitalk.com/forums/sho...on-wiring-help

    Iím still a bit stumped and would like some help please:


    I own a Daiici Dynamite King in Okinawa machine

    I purchased a Daiichi Battle Counter assuming Ďsame brand = easy installí Ö

    That does not seem to be the case!


    The Battle Counter came with a distribution board and a multiwire:
    Image from iOS (5).jpgImage from iOS (4).jpg


    The Battle Counter itself has quite a few wires out:
    Image from iOS (6).jpg


    The back of my machine has only 1 series of inputs:
    Image from iOS (3).jpg


    Before I go randomly attaching wires to the transformer and bricking the Battle Counter, I was hoping one of the experts on here could point me in the right direction.

    Best Wishes!

  2. The following user says "Thanks" to Pancakes


  3. #2
    Tokie Owens NicoleExpress's Avatar
    Join Date
    Dec 2022
    Location
    New England
    Posts
    27
    Thanks
    32
    Thanks Received
    42

    Default Re: Daiichi Battle Counter Wiring to Daiichi Dynamite King in Okinawa Machine

    You can actually find this information on the Daiichi website, there's a Google searchbox on this page: http://www.daiichi.net/material/detaromaterial.html

    I think this is your machine? http://www.daiichi.net/pdf/d777/w99.pdf If that helps...
    If you are willing to sell the machine CRアレパチ連発おはな (CR Arepachi Rapidfire Ohana), please let me know!

  4. The following 5 users say "Thanks" to NicoleExpress


  5. #3
    Stuey - The RADministrator MrGneiss's Avatar
    Join Date
    Apr 2005
    Location
    Indianapolis, IN
    Posts
    36,916
    Thanks
    66,479
    Thanks Received
    43,523

    Default Re: Daiichi Battle Counter Wiring to Daiichi Dynamite King in Okinawa Machine

    WELCOME!!!

    "Blowing smoke rings at the moon."

  6. #4
    Chicken Fried Steak takethecastle57's Avatar
    Join Date
    Aug 2005
    Location
    Monterey , Ca
    Posts
    20,099
    Thanks
    24,571
    Thanks Received
    11,446

    Default Re: Daiichi Battle Counter Wiring to Daiichi Dynamite King in Okinawa Machine

    and biscuits
    When things don't go right the 1st time , Step back ,Take a break and come back renewed. RGS

  7. #5
    Tokie Owens Pancakes's Avatar
    Join Date
    May 2023
    Location
    SC
    Posts
    4
    Thanks
    3
    Thanks Received
    1

    Default Re: Daiichi Battle Counter Wiring to Daiichi Dynamite King in Okinawa Machine

    Awesome, NicoleExpress - thanks for the links!

    The info on Daiichi's site got me a bit farther (thanks google translate!)

    Attachment 104455

    I assumed that the stripped wires coming from the distro board were the ones that went into the P inputs on my machine and the diagram confirms that.



    BattleCounterMarkup.jpg


    I powered the counter up with a 12v transformer (thought I'm pretty sure its 24v )

    The outputs to the machine make sense (thanks again NicoleExpress)

    Yet, I'm still stumped on the connection from the distro board to the battle counter

    From mandoman in : https://www.pachitalk.com/forums/showthread.php?56568-Battle-Counter-Daiichi-DLA-1-Installation-wiring-help

    “We know the 7 wire harness with the white plug goes to the Distribution Board.”

    I’ve located the 7 wire with the white plug – my distro board though is not a P1, and so I’m unsure as to where to connect the 7 wire into the board…

    Also, I believe this is the Battle Counter, a DLA – 1S
    http://www.daiichi.net/products/dla-1.html


    Could anyone clue me in on what I'm missing here with the connection from the Battle Counter to the board?

    Also, if someone could confirm the DLA - 1S is in fact 24v, that would be awesome (the stuff I've found seems to be all marketing materials)


    And thanks for the welcomes everyone!

  8. #6
    Gibisans - Japan West compirate's Avatar
    Join Date
    Feb 2005
    Location
    Down in da Holler, WV
    Posts
    9,037
    Thanks
    8,617
    Thanks Received
    18,336

    Default Re: Daiichi Battle Counter Wiring to Daiichi Dynamite King in Okinawa Machine

    They are all 24VAC. A DLA-1S is for pachislo, it's probably the DLA-1P.
    Last edited by compirate; 05-21-2023 at 07:18 PM.

    人生は恐れなければ、とても素晴らしいものなんだよ。
    人生に必要なもの。それは勇気と想像力、そして少しのお金だ。

  9. The following 3 users say "Thanks" to compirate


  10. #7
    I was thrown out of Top Gear Drunkenclam's Avatar
    Join Date
    May 2010
    Location
    Guildford, Surrey
    Posts
    27,990
    Thanks
    13,206
    Thanks Received
    18,297

    Default Re: Daiichi Battle Counter Wiring to Daiichi Dynamite King in Okinawa Machine

    mandomans board is a P1 board rather than a P board.








    the left diagram shows a 3 pin plug and socket. I would try that. Its in your picture earlier. next the the wire with the helpful tag Wire writen on it in Katakana


    thsi PDF seems to confirm it.

    http://www.daiichi.net/pdf/mente/sum...zokusiryou.pdf
    Last edited by Drunkenclam; 05-22-2023 at 04:37 PM.
    Ian #UKPachinko

  11. The following 2 users say "Thanks" to Drunkenclam


  12. #8
    Tokie Owens Pancakes's Avatar
    Join Date
    May 2023
    Location
    SC
    Posts
    4
    Thanks
    3
    Thanks Received
    1

    Default Re: Daiichi Battle Counter Wiring to Daiichi Dynamite King in Okinawa Machine

    Thanks for the input!

    The three wire to the 'day taro lamp' socket is one of the first things I tried. The plug and socket don't line up...

    Its distinctly possible that I have an incompatible board / battle counter:

    Incompatible.jpg

  13. #9
    I was thrown out of Top Gear Drunkenclam's Avatar
    Join Date
    May 2010
    Location
    Guildford, Surrey
    Posts
    27,990
    Thanks
    13,206
    Thanks Received
    18,297

    Default Re: Daiichi Battle Counter Wiring to Daiichi Dynamite King in Okinawa Machine

    Looks like your model is listed under DNR-4 I've sent Mandoman a message to see if he's got a spare or any other ideas.
    Ian #UKPachinko

  14. The following 3 users say "Thanks" to Drunkenclam


  15. #10
    Sandwich Shooter mandoman's Avatar
    Join Date
    Dec 2006
    Location
    West Texas
    Posts
    347
    Thanks
    2,574
    Thanks Received
    695

    Default Re: Daiichi Battle Counter Wiring to Daiichi Dynamite King in Okinawa Machine

    I'll have a look when I get home from work today and see if I have one with the cables.
    Check your PM.
    -Armando

  16. The following 2 users say "Thanks" to mandoman


  17. #11
    Sandwich Shooter mandoman's Avatar
    Join Date
    Dec 2006
    Location
    West Texas
    Posts
    347
    Thanks
    2,574
    Thanks Received
    695

    Default Re: Daiichi Battle Counter Wiring to Daiichi Dynamite King in Okinawa Machine

    Found one!

    IMG_2152.jpg

  18. The following 4 users say "Thanks" to mandoman


  19. #12
    Tokie Owens Pancakes's Avatar
    Join Date
    May 2023
    Location
    SC
    Posts
    4
    Thanks
    3
    Thanks Received
    1

    Default Re: Daiichi Battle Counter Wiring to Daiichi Dynamite King in Okinawa Machine

    Excellent! Do you have your own store mandoman?!

Similar Threads

  1. Daiichi Battle Counter Connector Plug Type
    By VideoRyan in forum Pachinko Technical Support Tickets
    Replies: 2
    Last Post: 01-13-2023, 05:02 PM
  2. Battle Counter Daiichi DLA-1 Installation wiring help
    By Ronniesays in forum Pachinko Technical Support Tickets
    Replies: 19
    Last Post: 04-16-2021, 11:13 AM
  3. Avengers Daiichi Battle Counter Hookup
    By Toyguy in forum Modern Pachinko
    Replies: 1
    Last Post: 12-02-2019, 09:37 AM
  4. Daiichi battle counter remote
    By Pachinko Botan in forum Yahoo Japan - Auction Area
    Replies: 1
    Last Post: 07-06-2015, 09:13 AM
  5. Help with battle counter from Daiichi
    By Montana in forum Pachinko Modifications
    Replies: 8
    Last Post: 01-14-2010, 01:51 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •