Results 1 to 3 of 3

Thread: Aladdin II Issues

  1. #1
    Tokie Owens Chaos3DPrinting's Avatar
    Join Date
    May 2023
    Location
    Algonac, Michigan
    Posts
    3
    Thanks
    0
    Thanks Received
    3

    Default Aladdin II Issues

    Hello, new to the site but not new to these machines. My dad has been a member here for years. Just picked up an Aladdin II that was originally his 10-12 years ago with some issues. Machine would not light up, and would make a loud single tone noise. Reels would not move, but tried to. I removed the reels, cleaned them up and gave them a few drops of oil. They'll now movie in start up with assistance. There was a loose connection and now it lights up fine. The single tone noise is still there, and no error music is playing. Machine shows EE Error, which is where I'm having my problems. I get the error with or without the hopper, and no amount of resets will remove the error. All leads have been reseated on both ends, with no visible broken wires upon inspection. I have reset with the door key, a soft reset, odds reset, and full reset. Every time I power this machine on, the error persists. Thankfully the volume knob turns the sound off completely, or I'd be going crazy over this. Is there anything else I can start checking, or maybe even replace to get this going again?

  2. #2
    Sandwich Shooter ebb's Avatar
    Join Date
    Apr 2009
    Location
    Massachusetts
    Posts
    468
    Thanks
    1,011
    Thanks Received
    871

    Default Re: Aladdin II Issues

    To me the machine is stuck trying to do something..noise stuck to
    another member tried unplugging and taking out the fuse
    I just have had a lot of machine’ there are other members here with much more expertise in electronics IMG_7459.jpgIMG_7460.png
    DON'T FEED THE

  3. #3
    Tokie Owens Chaos3DPrinting's Avatar
    Join Date
    May 2023
    Location
    Algonac, Michigan
    Posts
    3
    Thanks
    0
    Thanks Received
    3

    Default Re: Aladdin II Issues

    I’m not sure where the fuse is located as of yet. If EE is caused by reel error, that makes sense. Not sure how to reset those but I’m sure I can figure that out

Similar Threads

  1. Aladdin
    By blueeyes in forum Pachislo Technical Support Tickets
    Replies: 1
    Last Post: 03-21-2021, 04:48 PM
  2. Aladdin
    By salamone34 in forum Model Talk
    Replies: 4
    Last Post: 03-17-2010, 03:26 PM
  3. New User - Issues
    By Sid in forum Frequently Asked Questions about the Site
    Replies: 0
    Last Post: 07-20-2009, 05:11 AM
  4. Aladdin
    By Utopia1dc in forum Model Talk
    Replies: 13
    Last Post: 02-07-2005, 10:41 PM
  5. aladdin II
    By TANK in forum Model Talk
    Replies: 4
    Last Post: 02-02-2005, 02:28 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •