Evangelion 2018 Reborn issues -- I seek guidance

[Voldino]

I am not sure which one is the payout motor, I took a video of the wireing, hopefully is clear enough...

I think I forgot to post the wire video, my bad:

https://1drv.ms/v/s!AkkrUeTzpjcKiaJ8...UHL8g?e=IlFtOb

[Drunkenclam]

The payout motor. is the black thing running down the right hand side. Also might be worth removing it to make sure all the balls flow out. Warning, they roll everywhere. empty as many as you can out the rear tank first.

[Voldino]

The payout seems working, the balls are paid in the front tray correctly (1 when enter in pocket), the luncher was stuck due to a small plastic piece and is fixed.

The only problem now is the flashing white/red light of the frame during that looks like it is always in demo or attraction mode? Is it possible it's because I bypass the "call balls button" so it actually never starts?

[Drunkenclam]

The call buttons are separate circuits. It pretty much goes straight to.the 25pin d connection.

On my Bunny & Bunny. The frame flashes red and white if either door is open. So either the glass or the whole front.

If you open the door whilst the power on. You get an audible alarm and the red/white flash. If the door is open before the power is switched on. It just flashes red/white. As you already said yours doesn't send an alarm. I would check there next. And don't forget to check both door switches.

https://youtube.com/shorts/huopLc9dAFo?feature=share

[Drunkenclam]

OK. also on my Bunny & Bunny. there are 2 switches per door/glass. Giving 4 in total. if any of them don't have an pressure on them. It will flash red/white

switches behind glass door.

20230212_142357_resized.jpg

20230212_142404_resized.jpg

Switches behind main door.

20230212_142445_resized.jpg

20230212_142501_resized.jpg

[Voldino]

Thanks to all of you guys and thank you to you Drunkenclam for sending such detailed instruction, I was able to find the problem. The top switch is broken. I made a bridge on the cable coming out from the switch and the machine stopped flashing so I am gonna replace the switch. Do you know where I should look to find one?

IMG-20230212-WA0013.jpg

[Drunkenclam]

I would see what results fujisoku cf-db gives you. might be a jump over to ali express

[Voldino]

Thank you very much, I found it on aliexpress, now let's wait and see if I can finally make it work. really thanks a lot guys