Results 1 to 2 of 2

Thread: Two Issue need HELP

  1. #1
    Tokie Owens mvici's Avatar
    Join Date
    Nov 2022
    Location
    Virginia
    Posts
    6
    Thanks
    0
    Thanks Received
    0

    Default Two Issue need HELP

    Have a 7 lines machine and I need a reset procedure since my toggle switch (reset key) Is not letting me out of odds mode. I keep turning the key but it wont let me back in playing mode.

    Also does anyone know what these two switches do? https://share.icloud.com/photos/03em...GJBVBrtamGxXNA

    Thanks.

  2. #2
    Stuey - The RADministrator MrGneiss's Avatar
    Join Date
    Apr 2005
    Location
    Indianapolis, IN
    Posts
    38,495
    Thanks
    68,092
    Thanks Received
    45,095

    Default Re: TWo Issue need HELP

    Your switch might need to be replaced or maybe one of the wires came off??

    Probably what the switches are..Most people want these off..

    Two switches on the power supply:
    - One requires a soft reset at the end of a bonus.
    - The other pays out all tokens at the end of a bonus.

    For these switches in most cases off is in the down or right position.

    Reset

    https://www.youtube.com/watch?v=zpc8K4F6KPw

    Full reset (sometimes referred to here as the hard reset) it includes changing or setting the odds as part of the procedure..

    "TURN YOUR MACHINE OFF FIRST"

    1. Locate internal key switch, and insert key.
    Note: In order to change odds, machine must be in idle mode with no tokens/coins or credits being played and off.

    2. Turn "reset" key switch to on, to access programming mode.

    3. Turn on machine now.

    4. Depending on machine type, a number from 1 to 6 will be displayed on one of the LED meters on front door.

    5. Locate and push Odds setting button. Depress button and notice movement of number being displayed in LED meter.

    6. Once desired level is displayed (1 to 6), push down on play handle (Joy Stick) for 10 seconds.

    7. Turn "reset" key back to off.

    8. Machine should immediately initialize. If not, turn power switch to the OFF position, wait 15 seconds and turn power switch back to ON position.

    "Blowing smoke rings at the moon."

  3. The following 2 users say "Thanks" to MrGneiss


Similar Threads

  1. Power AT issue
    By Rmasters3 in forum Pachislo Technical Support Tickets
    Replies: 2
    Last Post: 03-26-2017, 03:03 PM
  2. Another Matrix issue help needed please screen graphic glitch issue
    By ryantiger99 in forum Pachinko Technical Support Tickets
    Replies: 38
    Last Post: 01-11-2014, 10:37 AM
  3. Neo-Geo monitor issue
    By Chrisdice in forum These are the days of our lives...
    Replies: 15
    Last Post: 03-09-2008, 07:38 AM
  4. K1 LCD Set up issue
    By dnketc in forum Pachislo Modifications
    Replies: 21
    Last Post: 06-14-2005, 12:48 PM
  5. legal issue
    By Urban Archaeologist in forum Vendors & Manufacturers Pachislo
    Replies: 14
    Last Post: 01-26-2005, 08:28 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •