Wheels acting strange after switch change

[mvici]

Hello I changed my reset key out with a toggle switch and now I can’t get the wheels to stop doing this. Any ideas?

https://share.icloud.com/photos/02ag...g7Xf7uhq5GUjsg

[MrGneiss]

That doesn't seem right!!

Have you tried unhooking the new switch to see if it goes back to normal??

[mvici]

Yes and now I have removed the switch and am manually connecting the wire to try and simulate the switch but it is still not spinning. Am I missing something during reset? Is there another step once you turn the reset key?

That doesn't seem right!!

Have you tried unhooking the new switch to see if it goes back to normal??

[MrGneiss]

Here is a normal reset procedure!!


https://www.youtube.com/watch?v=zpc8K4F6KPw

Full reset (sometimes referred to here as the hard reset) it includes changing or setting the odds as part of the procedure..

"TURN YOUR MACHINE OFF FIRST"

1. Locate internal key switch, and insert key.
Note: In order to change odds, machine must be in idle mode with no tokens/coins or credits being played and off.

2. Turn "reset" key switch to on, to access programming mode.

3. Turn on machine now.

4. Depending on machine type, a number from 1 to 6 will be displayed on one of the LED meters on front door.

5. Locate and push Odds setting button. Depress button and notice movement of number being displayed in LED meter.

6. Once desired level is displayed (1 to 6), push down on play handle (Joy Stick) for 10 seconds.

7. Turn "reset" key back to off.

8. Machine should immediately initialize. If not, turn power switch to the OFF position, wait 15 seconds and turn power switch back to ON position.