Any instructions with photos on how to turn modern machines into cyclic

[BogartusMaximus]

First off, just want to apologize to the parlor purists but Ive got a modern machine given to me and just wanted to convert it into cyclic mode. I couldnt really find it on the forum and or dont have time to go through thousands of posts. Any instructions on how to do it step-by-step? Photos on how to would be great! Thanks Pachi Fam!

[takethecastle57]

https://www.pachitalk.com/forums/sho...c+modification

[Drunkenclam]

First. Don't do it with a modern Kyoraku. These have a ball out sensor and a basic cyclic conversion screws it up and causes an error.


But the basic idea is. as all the balls leave the cel, either via a pocket or the hole at the bottom. rather than going out through the frame. You cut a hole or slot in the frame and put a guide ramp. that takes the balls to the front tray.

[rockston]

Just bought a machine and undid that conversion on it. I prefer to have balls go into the prize hopper and available to your shooter tray without handling them.