Mach GOGOGO Pachinko Is Too Loud

[Ahab]

Hello everyone. I recently acquired a Mach Go Go Go pachinko and its volume rises to WAKE THE DEAD when it hits any of its bonuses. It does have a volume control, but it is too loud even on the lowest level during bonuses. Has anyone out there performed "noise reduction surgery" on one of the machines? I will post some pics of mine in the morning.

Fortunately the other machines I purchased seem to run quieter, or at leas their volume controls work better. Many thanks to everyone for your assistance.

[takethecastle57]

Well you can get a stereo L pad

260-264_ALT_0.jpg


And on eBay you can get a waterproof 1-8 pairs of speakers and a 300 watt max for $30.00

EBay item 174634267949

s-l500.jpg

[Drunkenclam]

You could try LD’s sock option as a temporary measure.
by putting a sock in between the speaker cone and the grill.

[jasonlujan]

aside from it being too loud, how do you like the machine itself?

[Moparformances]

I have used these on many Pachinko and Pachislo both with 100% satisfaction.. nice and small easy to install.. i have read complaints from others but i love them.. the seller is a member as well..

https://www.ebay.com/itm/13057738009...item1e6704b2ff

these are the same but singles and solder free if you dont have the skills or equipment..

https://www.ebay.com/itm/13057476609...item1e66dcd013

[Ahab]

aside from it being too loud, how do you like the machine itself?

It is a lot of fun (at least when the neighbors are not complaining how loud it is)

[Ahab]

Here are those photos I promised.GoGo1.JPGGoGo2.JPGGoGo3.JPGThe third photo is of the back of the door. There are three speakers. The third is a woofer that is near the bottom of the unit. The upper tweeters are where all the racket is coming from.

[takethecastle57]

Yeah , the "Enter The Matrix " Has Four Speakers and a throbbing sub woofer but the Five cooling fans on the graphics card is loud also .

I still miss the one that I had.

[lotsoballs]

Most but not all cells have a master volume knob or switch on the rear somewhere on one of the boards. It’s separate from the volume controls on the front of the frame itself.

Might want to look around for it before buying volume controls.

[judremy]

Most but not all cells have a master volume knob or switch on the rear somewhere on one of the boards. It’s separate from the volume controls on the front of the frame itself.

Might want to look around for it before buying volume controls.

I second this. It's almost like a "sound range" setting and then the front lets you control where you are in the range.

[takethecastle57]

The "Revenge of Vader" uses the "Chance" button up front to adjust the volume .

[Ahab]

Most but not all cells have a master volume knob or switch on the rear somewhere on one of the boards. It’s separate from the volume controls on the front of the frame itself.

Might want to look around for it before buying volume controls.

This photo show the controls on the front. I will look around on the back Lotsoballs. Thanks for the advice.
cap4.JPG

[takethecastle57]

Those might be controls on the front of the machine but you can only scroll through different settings while Not playing the machine but it is fully powered up . Does that Huge button in the middle move left and right or is it just a straight mash the button ?

[Ahab]

Those might be controls on the front of the machine but you can only scroll through different settings while Not playing the machine but it is fully powered up . Does that Huge button in the middle move left and right or is it just a straight mash the button ?

No rotation. Just a simple button.

[Ahab]

Most but not all cells have a master volume knob or switch on the rear somewhere on one of the boards. It’s separate from the volume controls on the front of the frame itself.

Might want to look around for it before buying volume controls.

You were correct about the hidden knob in the back. It was set to 8. It turns out 0 is off. 1 is a whisper. 2 & 3 are too loud. 4 thru 10 is wake the dead. If after restarting, even on setting #1, if you touch the volume controls on the front it goes to wake the dead. So cool, but not quiet enough.

The front buttons show six levels, but all six are equally loud during events.

I really appreciate everyone's help on this issue.

[takethecastle57]

Clover collectables has a YouTube video of your machine and those arrow buttons on the left of the front of your machine Can adjust the Speakers Volume .


https://m.youtube.com/watch?v=RbUm3l...ature=emb_logo

[lotsoballs]

You were correct about the hidden knob in the back. It was set to 8. It turns out 0 is off. 1 is a whisper. 2 & 3 are too loud. 4 thru 10 is wake the dead. If after restarting, even on setting #1, if you touch the volume controls on the front it goes to wake the dead. So cool, but not quiet enough.

The front buttons show six levels, but all six are equally loud during events.

I really appreciate everyone's help on this issue.

Yeah, your issue is cell specific; because I have two machines in that same frame; Dead or Alive Xtreme and Fruit Punch and neither one is too loud, they are both pretty quiet if you turn them down via the front buttons.

[quester]

On some machines, the volume gets loud due to something being wrong, are you dumping winning balls into tray, if machine can't pay, it will get loud, if you don't fill top tray during fever, it might get loud also

[Ahab]

Clover collectables has a YouTube video of your machine and those arrow buttons on the left of the front of your machine Can adjust the Speakers Volume .


https://m.youtube.com/watch?v=RbUm3l...ature=emb_logo

I agree, but if I use them the volume goes to Max volume during events.



cap4.JPG

The machine is full of balls and has not been modified in any way. I just bought this machine in the 3rd group buy from JT Comatz. Karen from JT Comatz said she would check with an engineer, but I have not heard back from her. Thanks again everyone.

[takethecastle57]

Clover Collectables got back with me and said there is a Fragile little knob in the back of the machine that you can adjust like you stated earlier in this thread.

But he did state that it is a delicate knob so be gentle with it .