IGT The Terminator Pachislo Machine Power Supply Issue / Help

[Burn]

So this Terminator IGT 2000 machine power supply board had the issue where I needed to reset it but didn’t have a reset key. I was going to originally buy a premade reset switch with the key and use that instead. Later found the reset key taped on the side door hinge I used the key while following the instructions that’s left on the coin hopper turned it off while turning it, using the lever, etc and the machine made a buzzing noise then the power supply began to smoke, so I quickly took out the connectors and couldn't see anything wrong with it physically, I don't have a volt tester or anything like or know exactly what to be testing on this. The fuses were perfectly fine yet I think that's where the electronic burning smell came from initially, not too sure anymore. If someone can link me 8A/125V and 20A/125V glass tube fuses 6x30mm (just incase something is wrong with them) or have any suggestions about this please let me know! The machine was working day 1 it just didn't have a play feature or take coins, since I needed to reset it (I guess there was an error or something). I'm new to these things and would love to get it working since Terminator was one of my favorite movies along with it being a skill stop machine! I'll even be greatful if someone has a spare they no longer need and want to sell. Thanks!


285854383_4943130852481834_4228737418650862548_n.jpg286227243_4943130965815156_7717913822755911808_n.jpg286312230_4943130879148498_8888369702856494591_n.jpg286436781_4943130772481842_7250985701845107315_n.jpg

286482457_4948314611963458_4418200576414692364_n.jpg This is the board after it started smoking


285836579_4943130789148507_5062150706530441434_n.jpg285851533_4943130922481827_8121739798630511224_n.jpgunknown.png

[takethecastle57]

and biscuits

I have a Taiyo Elec Marvel Heroes pachislo (I used to have four more but members here needed to enjoy them more than I)

If you are willing to do the work of troubleshooting you can get a nice set from Amazon with a multimeter included . Amazon does have other things like glass fuses and other electronic components for sale .

YouTube has video's on how to use a multimeter


I.E. https://m.youtube.com/watch?v=r_migcta_Is

And since these wonderful machines do not have wiring/components diagram known as Schematics YouTube can help you there

https://m.youtube.com/watch?v=QFAWb1F_EpE

[Drunkenclam]

Switching power supplys can just go bad.
I would check the incoming voltage from the step down transformer on the LH side of the case. From my experience of different PSU its normally the capacitors that fail. But can't see anything obvious from the picture.