Trip Devil V by NET has led18 light out on the mainboard

[Richanzivino]

Hello all I'm new to these devices. However I have obtained 3.
2 I have working perfect. But the trip Devil will only give me a C.E error code everytime I put a token in.
I reset the machine and when I put a token in same error everytime. I have cleaned the coin mech. I have taken out cleaned and checked the hopper for jams. I have removed and cleaned all the connections. Still the same.
Only thing I notice is one of the leds on the mainboard is out.
Says led18. Any ideas if this led is supposed to be out or is there a problem with the mainboard?20220216_094414.jpg

[Richanzivino]

Attachment 100050Attachment 100051Attachment 100052Attachment 100053Attachment 100054

[Drunkenclam]

what happens if you unplug the token acceptor

an acceptor has 2 or 3 sensors in it. if the machine doesn't detect impulses in the right order or time, it throws out an error as it thinks your trying to trick the acceptor. if it doesn't go wrong until you put a token in. I don't think led 18 has anything to do with it.

for led decoding. test ever button and switch. including token overflow full, door reset, end of bonus switches. stop switch, spin lever, 1,2 max bet buttons. reel x position sensors. etc. make a note of them as might be usefull later or to others

[Richanzivino]

Sorry I mean the green led8 not 18, and not sure how to check the sensors.

[Richanzivino]

I was able to fix the problem by changing the coin sensors .all is good
Now I have 3 different fully working machines.
NET Trip Devil V
YAMASA Kung-fu Retsuden
BELLCO Kaiyu-Ki

[Drunkenclam]

[takethecastle57]