Am I missing a part to the ball feed assembly

[demery]

F40AA196-C77A-4DE5-BF7A-4B1D1F6B22B3.jpgPlease see the picture and what happens when I load balls into the front of my machine.

[Drunkenclam]

I don't know about missing a part. But the plastic is broken. By the stopper slide rod.

[demery]

You are correct Drunkenclam. I looked again and I can see line on the backboard as to where the ball used to ride. By chance does anybody have a 3D file of this part so I can make a new one? 57506A2F-0B8A-4D82-AD84-2A4263D25D94.jpg

[Drunkenclam]

One of the vintage guys might have a spare from a parts machine. What's the maker?

[Tink]

That piece needs the bottom portion to feed the balls one at a time onto the next ramp.

[Tink]

https://www.pachitalk.com/forums/sho...-Mech-Question

[demery]

Tink,

Thank you so much for this link. It is going to greatly help me in getting this fixed.

Drunkenclam

The machine is a 1976 Sankyo with a hinged back to the ball handling equipment in back of the machine.

Hopefully I can 3D print a piece to fix it or somehow learn CAD and develop my own printable replacement.

Thanks Guys.

[Peteybob]

You are correct Drunkenclam. I looked again and I can see line on the backboard as to where the ball used to ride. By chance does anybody have a 3D file of this part so I can make a new one? 57506A2F-0B8A-4D82-AD84-2A4263D25D94.jpg

I have this part intact on a parts machine. Private message me if interested.