74 Daiichi New Vanguard - Not Advancing Ball for Launch
Hi Everyone,
First time poster with my first Pachinko game. Got this from my nephew who was cleaning out his basement.
The first problem I have encountered is that when I launch a ball the machine does not let another ball fall in front of the hammer.
In order for the next ball to move in to the launch area, I have to reach around the back of the machine and push the white lever to the left.
Is there something that is supposed to move the white lever automatically?
Thanks
Re: 74 Daiichi New Vanguard - Not Advancing Ball for Launch
Well I figured it out.The wire connected to the launch hammer was on the left side of the white piece; supposed to be on the right side.
Re: 74 Daiichi New Vanguard - Not Advancing Ball for Launch
WELCOME!!!
"Blowing smoke rings at the moon."
Re: 74 Daiichi New Vanguard - Not Advancing Ball for Launch
When things don't go right the 1st time , Step back ,Take a break and come back renewed. RGS
Re: 74 Daiichi New Vanguard - Not Advancing Ball for Launch
Having the same issue except I’m looking for the whole white piece assembly as mine is broken
any 3d print wizards? Or spare machines I would like to get this part
Re: 74 Daiichi New Vanguard - Not Advancing Ball for Launch
Welcome to Pachitalk
Never Doubt that a small group of thoughtful, .......... /........ If your not going to stand behind our troops
...committed people can change the world. ............. /.................Please, Please stand in front of them
.....Indeed, it is the only thing that ever has............./
.........................................Margaret Mead
Re: 74 Daiichi New Vanguard - Not Advancing Ball for Launch
Originally Posted by ChasePNWPachinko
Took the broken piece out and was able to glue something up I値l get back today to let everyone know if it works. If it does I値l be bringing it to a friend to get copies made
Sent from my iPhone using Tapatalk
Re: 74 Daiichi New Vanguard - Not Advancing Ball for Launch
It Works! Machine is up and going again!
Took the broken piece out and was able to glue something up I値l get back today to let everyone know if it works. If it does I値l be bringing it to a friend to get copies made
Sent from my iPhone using Tapatalk
I知 going to be bringing this piece to get 3D printed and also plastic mold injection as I知 not to sure if 3D print material will hold up to constant use
Sent from my iPhone using Tapatalk
Re: 74 Daiichi New Vanguard - Not Advancing Ball for Launch
PLA should be tough enough
When things don't go right the 1st time , Step back ,Take a break and come back renewed. RGS
Re: 74 Daiichi New Vanguard - Not Advancing Ball for Launch
Next week I知 getting a piece made I値l post up here also anyone that needs pieces designed please get in contact as I値l get pieces made
Sent from my iPhone using Tapatalk
Posting Permissions
Reply With Quote
