Need Help Power Supply pachinko Terminator 2 2008 SAMMY

[lotsoballs]

hi
so I have 25V output on the transfo
I already unplug everything, and it s the same problem
i am waiting for news from SAMMY, for technical information in this machine.

I’d be really surprised if they still support an old model like that on the secondhand market. It’s not uncommon for some unscrupulous seller to “fry” a machine (plug into 110v not using a step down transformer to 24v, or just have components fail due to age) then turn around and sell it to some poor pachinko newbie via eBay auction telling them it’s “an easy fix…”

Somebody just fried an AKB48 machine in the FB North American Pachinko club so be on the lookout to avoid that one! ⚡️⚡️

[Podfun]

I’d be really surprised if they still support an old model like that on the secondhand market. It’s not uncommon for some unscrupulous seller to “fry” a machine (plug into 110v not using a step down transformer to 24v, or just have components fail due to age) then turn around and sell it to some poor pachinko newbie via eBay auction telling them it’s “an easy fix…”

Somebody just fried an AKB48 machine in the FB North American Pachinko club so be on the lookout to avoid that one! ⚡️⚡️

I just bought this exact same machine with the same problem I even put in an new fuse holder with a fuse I was told to remove z1 off the board and I still cannot get power to the machine received_2124149544454357.jpegreceived_1409544096198447.jpeg20220904_120706.jpg20220904_120706.jpg