Results 1 to 11 of 11

Thread: Biohazard 6 Pachislot not taking tokens

  1. #1
    Tokie Owens Tkat5200's Avatar
    Join Date
    Nov 2021
    Location
    Los Angeles
    Posts
    26
    Thanks
    0
    Thanks Received
    1

    Default Biohazard 6 Pachislot not taking tokens

    It works and lights up great, but everytime I put a token in (from the hundreds that I have that are all different) it comes right back out again. I can't figure out how to reset the coin mech to take tokens again.

    anyone know?

  2. #2
    I was thrown out of Top Gear Drunkenclam's Avatar
    Join Date
    May 2010
    Location
    Guildford, Surrey
    Posts
    28,495
    Thanks
    13,442
    Thanks Received
    18,805

    Default Re: Biohazard 6 Pachislot not taking tokens

    assuming the unit is in error or reset mode. Then on most machines. an electro magnet energizes, pulling a plate so tokens don't fall out.
    Try a full reset. then your going to have to start investigating the token acceptor.
    Ian #UKPachinko

  3. The following user says "Thanks" to Drunkenclam


  4. #3
    Tokie Owens Tkat5200's Avatar
    Join Date
    Nov 2021
    Location
    Los Angeles
    Posts
    26
    Thanks
    0
    Thanks Received
    1

    Default Re: Biohazard 6 Pachislot not taking tokens

    This is a LAME question I'm about to ask but...how do I reset this one? I've turned the key inside on the power to ON which I assumed was reset cause the screen in front went black, but nothing shows up on the tiny display where usually there is a "1" or something.

  5. #4
    I was thrown out of Top Gear Drunkenclam's Avatar
    Join Date
    May 2010
    Location
    Guildford, Surrey
    Posts
    28,495
    Thanks
    13,442
    Thanks Received
    18,805

    Default Re: Biohazard 6 Pachislot not taking tokens

    Ian #UKPachinko

  6. #5
    Tokie Owens Tkat5200's Avatar
    Join Date
    Nov 2021
    Location
    Los Angeles
    Posts
    26
    Thanks
    0
    Thanks Received
    1

    Default Re: Biohazard 6 Pachislot not taking tokens

    Tried this as it works on the Samurai Showdown machine I have.
    the first issue is when I put this into RESET mode, there is no number at all on that display. I added a screenshot of what it looks like when I follow those instructions.
    on the front of the machine I have what's on the screenshot

    PXL_20220116_221142570.MP.jpg
    Outside what is shown when I power up



    PXL_20220116_221151381.MP.jpg
    What it looks like when I put it into RESET mode. (inside the machine)

  7. #6
    I was thrown out of Top Gear Drunkenclam's Avatar
    Join Date
    May 2010
    Location
    Guildford, Surrey
    Posts
    28,495
    Thanks
    13,442
    Thanks Received
    18,805

    Default Re: Biohazard 6 Pachislot not taking tokens

    In that case. I would check for a sticking button or switch. There is normally a row of leds that will light or go out when you press a button or lever.
    I would check them all. even the ones you don't use. its also a good idea to write down which one is which. as can help with any other fault finding in the future.
    Ian #UKPachinko

  8. The following user says "Thanks" to Drunkenclam


  9. #7
    Tokie Owens Tkat5200's Avatar
    Join Date
    Nov 2021
    Location
    Los Angeles
    Posts
    26
    Thanks
    0
    Thanks Received
    1

    Default Re: Biohazard 6 Pachislot not taking tokens

    ok I'll start poking around. thank you Drunkenclam for the tips

  10. #8
    Tokie Owens Tkat5200's Avatar
    Join Date
    Nov 2021
    Location
    Los Angeles
    Posts
    26
    Thanks
    0
    Thanks Received
    1

    Default Re: Biohazard 6 Pachislot not taking tokens

    Nothing happened. Its still the same and everything seems to be working as it should not sticky buttons or anything.

    Really confused now...

  11. #9
    Pachi Puro Peteybob's Avatar
    Join Date
    May 2013
    Location
    Grand Rapids, Michigan
    Posts
    6,029
    Thanks
    6,576
    Thanks Received
    3,677

    Default Re: Biohazard 6 Pachislot not taking tokens

    Quote Originally Posted by Drunkenclam View Post
    In that case. I would check for a sticking button or switch. There is normally a row of leds that will light or go out when you press a button or lever.
    I would check them all. even the ones you don't use. its also a good idea to write down which one is which. as can help with any other fault finding in the future.
    Tkat5200: Did you also check out the spin knob in the way noted above? Spin knobs can also get buggy from gunk or just break down.

  12. #10
    Tokie Owens Tkat5200's Avatar
    Join Date
    Nov 2021
    Location
    Los Angeles
    Posts
    26
    Thanks
    0
    Thanks Received
    1

    Default Re: Biohazard 6 Pachislot not taking tokens

    Quote Originally Posted by Peteybob View Post
    Tkat5200: Did you also check out the spin knob in the way noted above? Spin knobs can also get buggy from gunk or just break down.
    Spin knob?
    I'm not following you.

    I checked all the buttons, none were stuck or sticking. I checked the switches inside and the reset keys area and it also was fine.
    Am I missing something?

    I'm super new at this, like a few months into it i'm still trying to understand it all.

  13. #11
    Chicken Fried Steak takethecastle57's Avatar
    Join Date
    Aug 2005
    Location
    Monterey , Ca
    Posts
    21,240
    Thanks
    26,028
    Thanks Received
    11,938

    Default Re: Biohazard 6 Pachislot not taking tokens

    It's the stick with the Little ball on it that you tap down to start the reels
    When things don't go right the 1st time , Step back ,Take a break and come back renewed. RGS

Similar Threads

  1. Biohazard 5 Coin Mech not accepting tokens.
    By Mr Kong in forum Pachislo Technical Support Tickets
    Replies: 20
    Last Post: 04-28-2021, 08:24 AM
  2. biohazard pachislot help please
    By dycegamez in forum Pachislo Technical Support Tickets
    Replies: 20
    Last Post: 03-28-2014, 11:26 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •