Error Code "A." Nishijin Nekketsu Bohkenoh model Y&O

[atlanticom]

Pneuma. No you test ohms (resistance) with the cable out of circuit. Please search YouTube for "Use Multimeter to Test Resistance and Continuity" for instructions

[Pneuma]

Pneuma. No you test ohms (resistance) with the cable out of circuit. Please search YouTube for "Use Multimeter to Test Resistance and Continuity" for instructions

Thats probably a good idea lol

[Pneuma]

@Pneuma, I looked at your previous pics and it's not clear whether your cpu->cr connector cable is connected in the correct spot on the CR board. It should be connected to the bottom of the CR board as illustrated here.

Attachment 99088

It's connected to the side

[Pneuma]

@Pneuma, I looked at your previous pics and it's not clear whether your cpu->cr connector cable is connected in the correct spot on the CR board. It should be connected to the bottom of the CR board as illustrated here.

Attachment 99088

That fixed it. The cord was plugged into the side instead of the bottom. I plugged the said cord where u pictured above and put the other cord in the side where it was

[Pneuma]

It's up and running with layout. Thank u again everybody

[atlanticom]

That's great to hear! Enjoy,

[Pneuma]

Thank you my friend. I'm loving it and cant wait to acquire my next one. It is so much more meaningful to me that I was able to bring it back to life with everybody's help. Thanks again

[Peteybob]

It's up and running with layout. Thank u again everybody

Great to hear all is well again. Make room for more as they tend to multiply

[rubberratt]

Woop Woop - He has the bug !

When you have the $$$ Dave R's CR emulator is the next step, followed by a Battle counter, followed by a Ball lifter, followed by a lower hopper - I could go on . But I won't.

Gratz and looking forward to seeing you here often.

RR

[takethecastle57]

Thank you my friend. I'm loving it and cant wait to acquire my next one. It is so much more meaningful to me that I was able to bring it back to life with everybody's help. Thanks again

"He's hooked he's hooked his brain is cooked" Uncle Vic circa 1980

https://m.youtube.com/watch?v=qg_wuKLqV8g

[Drunkenclam]

A word of warning. Some machines that have been blobbed. Don't like having proper dongles plugged in.

[takethecastle57]

Blobbed ? Is that a new Horror movie ?

[Pneuma]

Good morning everybody is my newest concern. Everyone I make it to fever mode , something happens to cause sirens to go off and it displays this. It had happened twice. I have to turn off machine and unplug the monitor and plug back in the monitor to get it to turn on. Next time it happens, I'll check for an error code. Had anybody seen this before?

[Peteybob]

The message is saying to call for an attendant. Unplug your dongle to see if it is interfering somehow if you stored it on your machine.

[Pneuma]

Dongle is not connected. I'm waiting for the next fever to happen to see what info. I can get. I usually just unplug it. The farthest I made it to was round 9. This was was after making two balls into fever hole. I poured some more balls into the prize hopper than it happened. I havent been able to make it through a complete fever mode yet

[Peteybob]

I recall one of my older machine throwing out an message and stopping all play if the rear hopper ran empty. It could be this same frame that you have.

[Pneuma]

I have more investigating to do

[Drunkenclam]

Some machines hate it if you don't play through the fever as they assume there is a fault.

[Pneuma]

Hello. Would anybody know where I could find a replacement screen for a Nishijin Y&O model by chance??

[Drunkenclam]

Best way is to take it apart and find the maker and model number of the original screen.