Results 1 to 9 of 9

Thread: Feeder tray for 74 Sanyo no fire Panchinko

  1. #1
    Tokie Owens Gnrwarkfc's Avatar
    Join Date
    Oct 2021
    Location
    Dsm Iowa
    Posts
    1
    Thanks
    0
    Thanks Received
    3

    Default Feeder tray for 74 Sanyo no fire Panchinko

    Hello and good morning. First off let me introduce myself as someone new to the hobby. I come from the pinball resto world and had to get one of these pachinko machines. Sadly for me the panchinko machine I bought came without the feeder tray (it was broken off). Unlike pinball Iíve had a difficult time finding this part. Is there anyone out there who has a 74 Sanyo no fire! Feeder tray? If not does anyone have any advice as to how to make the proper contacts? Surely Iím not the first person whoís had this problem. What do you folks do in this situation? Iím sure the fastest solution is to just buy another game however i feel someone created this thing, it deserves another life 😁.

    Thanks everyone in advance for thoughtful consideration and hope I didnít come off as too much of an annoying newb to this community.

    attached are some pictures.

  2. The following 3 users say "Thanks" to Gnrwarkfc


  3. #2
    Stuey - The RADministrator MrGneiss's Avatar
    Join Date
    Apr 2005
    Location
    Indianapolis, IN
    Posts
    32,997
    Thanks
    62,181
    Thanks Received
    40,344

    Default Re: Feeder tray for 74 Sanyo no fire Panchinko

    WELCOME!!!

    "Blowing smoke rings at the moon."

  4. #3
    Chicken Fried Steak takethecastle57's Avatar
    Join Date
    Aug 2005
    Location
    Monterey , Ca
    Posts
    16,355
    Thanks
    20,694
    Thanks Received
    10,210

    Default Re: Feeder tray for 74 Sanyo no fire Panchinko

    When things don't go right the 1st time , Step back ,Take a break and come back renewed. RGS

  5. #4
    Pachi Puro pachiwall's Avatar
    Join Date
    Oct 2010
    Location
    Dayton, Ohio
    Posts
    3,213
    Thanks
    4,599
    Thanks Received
    4,630

    Default Re: Feeder tray for 74 Sanyo no fire Panchinko

    search eBay for pachinko parts. Pay no attention to the name "no fire". Your primary machine identification word will be Comet II (you should also try Comet 2). You may want to call the part an "upper hopper, reward hopper, or reward tray". If you call it a feeder tray...you will likely get a lot of hits for the front top feeder tray.

  6. The following 3 users say "Thanks" to pachiwall


  7. #5
    Pachi Puro pachiwall's Avatar
    Join Date
    Oct 2010
    Location
    Dayton, Ohio
    Posts
    3,213
    Thanks
    4,599
    Thanks Received
    4,630

    Default Re: Feeder tray for 74 Sanyo no fire Panchinko

    As I look at your Comet II, yours appears older than mine. Biggest difference I see is...mine has a quick release back. I wondered if ALL Sanyo Comet II machines did this or not. It certainly is a blessing when it comes to deep cleaning!
    Here is a link to some useful info, courtesy of takethecastle57 https://m.youtube.com/results?sp=mAE...et+II+pachinko

  8. The following user says "Thanks" to pachiwall


  9. #6
    Pachi Puro pachiwall's Avatar
    Join Date
    Oct 2010
    Location
    Dayton, Ohio
    Posts
    3,213
    Thanks
    4,599
    Thanks Received
    4,630

    Default Re: Feeder tray for 74 Sanyo no fire Panchinko

    And how could I forget! Welcome to Pachitalk! You will find a lot of help here!

  10. #7
    Fever Hunter machgo's Avatar
    Join Date
    Sep 2017
    Location
    Chicago
    Posts
    216
    Thanks
    240
    Thanks Received
    218

    Default Re: Feeder tray for 74 Sanyo no fire Panchinko

    Personally, I would prefer to repair/restore these machines with original parts. Having said that, the part you need is a dirt-simple box, with a rectangular hole in the bottom.

    You can fab-up a part to fit, and it will function just as well as an original.

    I only mention that in the event that you cannot find a direct replacement.

    That's a good looking machine! Could you post tighter images of the center attraction, please? I've never seen that one...

  11. The following 2 users say "Thanks" to machgo


  12. #8
    Pachi Puro Moparformances's Avatar
    Join Date
    Jan 2009
    Location
    Diamond Springs CA
    Posts
    13,697
    Thanks
    25,850
    Thanks Received
    11,673

    Default Re: Feeder tray for 74 Sanyo no fire Panchinko

    Welcome to Pachitalk
    Never Doubt that a small group of thoughtful, .......... /........ If your not going to stand behind our troops
    ...committed people can change the world. ............. /.................Please, Please stand in front of them
    .....Indeed, it is the only thing that ever has............./
    .........................................Margaret Mead

  13. #9
    Blind Shooter GameXGame's Avatar
    Join Date
    Jan 2012
    Location
    West
    Posts
    64
    Thanks
    4
    Thanks Received
    65

    Default Re: Feeder tray for 74 Sanyo no fire Panchinko

    Quote Originally Posted by Gnrwarkfc View Post
    Hello and good morning. First off let me introduce myself as someone new to the hobby. I come from the pinball resto world and had to get one of these pachinko machines. Sadly for me the panchinko machine I bought came without the feeder tray (it was broken off). Unlike pinball I’ve had a difficult time finding this part. Is there anyone out there who has a 74 Sanyo no fire! Feeder tray? If not does anyone have any advice as to how to make the proper contacts? Surely I’m not the first person who’s had this problem. What do you folks do in this situation? I’m sure the fastest solution is to just buy another game however i feel someone created this thing, it deserves another life .

    Thanks everyone in advance for thoughtful consideration and hope I didn’t come off as too much of an annoying newb to this community.

    attached are some pictures.

    You will also need a Jackpot Hopper feeder track cover. It's white located on Pachiwall's picture. There's an original transparent yellow one on ebay now, but view carefully the shape and compare that to your Jackpot Hopper feeder's track. It should fit. But confirm with the seller to be sure.

    https://www.ebay.com/itm/11493766474...gAAOSwAHRgY4XQ

Similar Threads

  1. My ball feeder doesn't work in my Model A
    By KathyAden in forum Vintage Pachinko
    Replies: 23
    Last Post: 01-10-2021, 04:03 PM
  2. Sanyo Comet II feeder tray
    By mrmatney in forum Vintage Pachinko
    Replies: 2
    Last Post: 08-09-2018, 10:40 AM
  3. sanyo comet II empties to bottom tray?
    By mudfud in forum Vintage Pachinko
    Replies: 12
    Last Post: 01-15-2009, 04:08 AM
  4. Automatic Token Feeder????
    By gwarzin in forum Pachislo Modifications
    Replies: 8
    Last Post: 12-12-2004, 06:20 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •