How do I chage artwork on an Wai 2 Pulsar machine
Hi all, I just picked up this machine and was hoping to swap out graphics to something custom, but I can't figure out how to get to the old panel to remove it. Any tips are greatly appreciated.
244475592_10159946185137446_7555631136408630324_n.jpeg
244555512_10159946193547446_4299641509051360057_n.jpeg
Re: How do I chage artwork on an Wai 2 Pulsar machine
There are 3 clips on the inside of the front door. Push down and out on the clips and the top of the belly glass will come out. Once you have the top out, roll the belly glass away from the machine and the bottom will lift out.
pulsar.jpeg
What if...the HOKEY POKEY, is what it's all about?
Re: How do I chage artwork on an Wai 2 Pulsar machine
Welcome to Pachitalk
Never Doubt that a small group of thoughtful, .......... /........ If your not going to stand behind our troops
...committed people can change the world. ............. /.................Please, Please stand in front of them
.....Indeed, it is the only thing that ever has............./
.........................................Margaret Mead
Re: How do I chage artwork on an Wai 2 Pulsar machine
WELCOME!!!
"Blowing smoke rings at the moon."
Re: How do I chage artwork on an Wai 2 Pulsar machine
When things don't go right the 1st time , Step back ,Take a break and come back renewed. RGS
Re: How do I chage artwork on an Wai 2 Pulsar machine
Thanks Wayne! This did the trick perfectly! Any tips on taking out the top panel artwork too?Originally Posted by Wayne-Ooo
There are 3 clips on the inside of the front door. Push down and out on the clips and the top of the belly glass will come out. Once you have the top out, roll the belly glass away from the machine and the bottom will lift out.
5A22F78A-E778-4D63-B7DE-2DF2394285BA.jpeg
65C875A7-37C7-4654-B175-0752D014A178.jpg
Posting Permissions
Reply With Quote
