Page 1 of 2 1 2 LastLast
Results 1 to 20 of 21

Thread: newbie question

  1. #1
    Tokie Owens gpao's Avatar
    Join Date
    Aug 2021
    Location
    Philippines
    Posts
    11
    Thanks
    0
    Thanks Received
    2

    Default newbie question

    hi

    I have bought 3 PachiSlo (I think one is in fact an Okislo the coins are 3cm diameter) in a flea market. none have the door key. 2 start with Error E1 and 1 wasn't starting at all.
    i was able to open the non working one (unlocked by the hole below the machine), and put in place the fuse and it actually started and seems to work. All the tokens are in the Hopper, how can i empty it in order to test the machine before i can buy new tokens ? the two others i wasn't yet able to open.

    the one i opened i can see: Pioneer . Okinawa island , Siolar and looks old
    the 2 non opened are : bio hazard (don't find how to unlock) and dawn of dream (i think i found the latch but the door seems blocked)

    thanks in advance for your help,

  2. #2
    Tokie Owens gpao's Avatar
    Join Date
    Aug 2021
    Location
    Philippines
    Posts
    11
    Thanks
    0
    Thanks Received
    2

    Default Re: newbie question

    I just succeeded to open the bio hazard one. i see there is no key to reset the machine, maybe i can replace by a simple switch ? The hopper was disconnected probably not working anymore. brand is Asahi Seiko model PH-1800-ER1

  3. #3
    I was thrown out of Top Gear Drunkenclam's Avatar
    Join Date
    May 2010
    Location
    Guildford, Surrey
    Posts
    27,357
    Thanks
    12,862
    Thanks Received
    17,778

    Default Re: newbie question

    Sure. Open up the supply (with the power disconnected) and replace the key switch with a toggle switch
    Ian #UKPachinko

  4. The following user says "Thanks" to Drunkenclam


  5. #4
    Tokie Owens gpao's Avatar
    Join Date
    Aug 2021
    Location
    Philippines
    Posts
    11
    Thanks
    0
    Thanks Received
    2

    Default Re: newbie question

    [QUOTE=Drunkenclam;617278]Sure. Open up the supply (with the power disconnected) and replace the key switch with a toggle switch [/QUOT

    thanks can i find any schema on the site to help me ?

  6. #5
    I was thrown out of Top Gear Drunkenclam's Avatar
    Join Date
    May 2010
    Location
    Guildford, Surrey
    Posts
    27,357
    Thanks
    12,862
    Thanks Received
    17,778

    Default Re: newbie question

    unfortuatly no. But the switch is normally just a 2 wire job. either open or closed signal.
    Ian #UKPachinko

  7. The following user says "Thanks" to Drunkenclam


  8. #6
    Chicken Fried Steak takethecastle57's Avatar
    Join Date
    Aug 2005
    Location
    Monterey , Ca
    Posts
    18,357
    Thanks
    22,642
    Thanks Received
    10,861

    Default Re: newbie question

    When things don't go right the 1st time , Step back ,Take a break and come back renewed. RGS

  9. #7
    Tokie Owens gpao's Avatar
    Join Date
    Aug 2021
    Location
    Philippines
    Posts
    11
    Thanks
    0
    Thanks Received
    2

    Default Re: newbie question

    thanks for the welcome @takethecastle57 , i don't know what you drink but if it makes me a blue face, not sure i will try ;-)

    ok hope i can find some time this weekend to look at it.

    what about refurbishing the hopper : any advice. Same can i find cabling description ?

  10. #8
    Chicken Fried Steak takethecastle57's Avatar
    Join Date
    Aug 2005
    Location
    Monterey , Ca
    Posts
    18,357
    Thanks
    22,642
    Thanks Received
    10,861

    Default Re: newbie question

    Well that's the problem when the machines leave the parlor . No manufacturers Support like wiring diagrams and such .

    We do have some manuals in our Research section . We do have a whole bunch of Threads on this forum with people doing the same thing you are doing .

    Resurecting the Dead machines

    https://m.youtube.com/results?sp=mAE...out+schematics


    As for my drink well is what I drink a lot of (Green Tea mostly)
    Last edited by takethecastle57; 09-01-2021 at 04:22 PM.
    When things don't go right the 1st time , Step back ,Take a break and come back renewed. RGS

  11. #9
    Chicken Fried Steak takethecastle57's Avatar
    Join Date
    Aug 2005
    Location
    Monterey , Ca
    Posts
    18,357
    Thanks
    22,642
    Thanks Received
    10,861

    Default Re: newbie question

    Nice , Clear photos of your machines posted here on this Thread on the area's in question may help us help you.

    We do have a Thread on how to post the photos and it did come when you first became a member here.
    When things don't go right the 1st time , Step back ,Take a break and come back renewed. RGS

  12. #10
    Tokie Owens gpao's Avatar
    Join Date
    Aug 2021
    Location
    Philippines
    Posts
    11
    Thanks
    0
    Thanks Received
    2

    Default Re: newbie question

    noted :-)

  13. The following user says "Thanks" to gpao


  14. #11
    I was thrown out of Top Gear Drunkenclam's Avatar
    Join Date
    May 2010
    Location
    Guildford, Surrey
    Posts
    27,357
    Thanks
    12,862
    Thanks Received
    17,778

    Default Re: newbie question

    Quote Originally Posted by gpao View Post
    thanks for the welcome @takethecastle57 , i don't know what you drink but if it makes me a blue face, not sure i will try ;-)

    Maybe its 'Red Horse'
    Ian #UKPachinko

  15. #12
    Tokie Owens gpao's Avatar
    Join Date
    Aug 2021
    Location
    Philippines
    Posts
    11
    Thanks
    0
    Thanks Received
    2

    Default Re: newbie question

    Hi all

    Other question , the hopper and token devices are disconnected and linked to dongles. Do you know what it means and how it works then for playing ? Can i revert back to the token mode and if i just need to reconnect them ? thanks

    IMG_1697.jpgIMG_1706.jpgIMG_1658.jpg

  16. The following user says "Thanks" to gpao


  17. #13
    Tokie Owens gpao's Avatar
    Join Date
    Aug 2021
    Location
    Philippines
    Posts
    11
    Thanks
    0
    Thanks Received
    2

    Default Re: newbie question

    haha you know philippines brands ?

  18. #14
    Pachi Puro Peteybob's Avatar
    Join Date
    May 2013
    Location
    Grand Rapids, Michigan
    Posts
    5,957
    Thanks
    6,535
    Thanks Received
    3,587

    Default Re: newbie question

    Quote Originally Posted by gpao View Post
    Hi all

    Other question , the hopper and token devices are disconnected and linked to dongles. Do you know what it means and how it works then for playing ? Can i revert back to the token mode and if i just need to reconnect them ? thanks

    IMG_1697.jpgIMG_1706.jpgIMG_1658.jpg
    Hello gpao and welcome to the group

    The dongles are what replaces the need for using tokens. The machine should credit up by pressing one of the buttons above the spin knob. As long as everything worked prior to being installed then you should be able to simply unplug the dongle wiring and reconnect the originals. This is how one of mine worked out.

  19. The following user says "Thanks" to Peteybob


  20. #15
    Tokie Owens gpao's Avatar
    Join Date
    Aug 2021
    Location
    Philippines
    Posts
    11
    Thanks
    0
    Thanks Received
    2

    Default Re: newbie question

    Quote Originally Posted by Peteybob View Post
    Hello gpao and welcome to the group

    The dongles are what replaces the need for using tokens. The machine should credit up by pressing one of the buttons above the spin knob. As long as everything worked prior to being installed then you should be able to simply unplug the dongle wiring and reconnect the originals. This is how one of mine worked out.
    thanks Peteybob, I'll try

  21. #16
    I was thrown out of Top Gear Drunkenclam's Avatar
    Join Date
    May 2010
    Location
    Guildford, Surrey
    Posts
    27,357
    Thanks
    12,862
    Thanks Received
    17,778

    Default Re: newbie question

    Quote Originally Posted by gpao View Post
    haha you know philippines brands ?
    Yep. Mrs Clam comes from Mindinao

    she also cooks adobo with gin
    Last edited by Drunkenclam; 09-05-2021 at 05:09 PM. Reason: added gin.
    Ian #UKPachinko

  22. The following user says "Thanks" to Drunkenclam


  23. #17
    Tokie Owens gpao's Avatar
    Join Date
    Aug 2021
    Location
    Philippines
    Posts
    11
    Thanks
    0
    Thanks Received
    2

    Default Re: newbie question

    Quote Originally Posted by Drunkenclam View Post
    Yep. Mrs Clam comes from Mindinao

    she also cooks adobo with gin
    haha, ok ok that's why

  24. #18
    Tokie Owens gpao's Avatar
    Join Date
    Aug 2021
    Location
    Philippines
    Posts
    11
    Thanks
    0
    Thanks Received
    2

    Default Re: newbie question

    Hello

    still trying to use my dawn of Dreams MAchine. I connected back the hopper and token controller. But seems i can't get out from the config mode. When i start it i can only get the configuration menu (See picture). If i click on back the menu is removed but nothing happens. if i click again on the push button i get the same menu again. I tried also to push on the buttons (power supply or inside the door the blue button on the picture) in reset or normal mode but nothing happens. does one of you as a guide or can share the functions ?
    I'd just like to reactivate the token mode, since the previous one is asking a username password that i don't have or display a QRcode that redirect me to a web site ...Skype_Picture_2021_09_11T06_18_03_948Z.jpgSkype_Picture_2021_09_11T06_17_42_022Z.jpgSkype_Picture_2021_09_11T06_17_57_971Z.jpgSkype_Picture_2021_09_11T06_17_50_862Z.jpg
    thanks in advance

  25. #19
    I was thrown out of Top Gear Drunkenclam's Avatar
    Join Date
    May 2010
    Location
    Guildford, Surrey
    Posts
    27,357
    Thanks
    12,862
    Thanks Received
    17,778

    Default Re: newbie question

    Google translate says for that screen.

    System menu →
    1. Volume adjustment mode
    2. Game standby lamp color selection mode
    3. Side lamp test mode
    4. Return


    What happens when you select option 4
    Ian #UKPachinko

  26. The following user says "Thanks" to Drunkenclam


  27. #20
    Tokie Owens gpao's Avatar
    Join Date
    Aug 2021
    Location
    Philippines
    Posts
    11
    Thanks
    0
    Thanks Received
    2

    Default Re: newbie question

    Quote Originally Posted by Drunkenclam View Post
    Google translate says for that screen.

    System menu →
    1. Volume adjustment mode
    2. Game standby lamp color selection mode
    3. Side lamp test mode
    4. Return


    What happens when you select option 4
    it goes to the screen as per picture 4. Nothing works but if i use the push button it displays again the menu. so i can only use this menu or leave it, but nothing else. Does it mean that i'm in setup mode ?

Page 1 of 2 1 2 LastLast

Similar Threads

  1. Newbie question
    By Noggie in forum Vintage Pachinko
    Replies: 7
    Last Post: 01-18-2020, 11:37 AM
  2. Newbie question
    By Sanguis in forum Model Talk
    Replies: 7
    Last Post: 07-05-2019, 07:09 AM
  3. newbie question
    By beth3535 in forum Modern Pachinko
    Replies: 10
    Last Post: 08-27-2007, 02:33 PM
  4. another newbie question
    By deano in forum Model Talk
    Replies: 12
    Last Post: 11-10-2006, 02:15 AM
  5. Newbie question.
    By eltonkk in forum Modern Pachinko
    Replies: 17
    Last Post: 10-29-2006, 03:15 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •