Power Tulip Machine

[Wayne-Ooo]

I worked on getting the Model B back attached to the playfield.

I decided to leave the solenoid and power tulip switch in their original places. There really wasn't any good solution to relocate them and get the back to fit as normal.

So, that meant that the rear plastic's need to be set out, from the back of the playfield, 1 1/2" to clear the solenoid.

Here are some pictures of what I came up with. I cut all the openings needed and made ramps/extensions to cover the 1 1/2" span. Mounted it with hinges, so easy access to the inside, if necessary.




pt11.jpg pt12.jpg pt13.jpg