My latest restoration project, A.K.A. Parts Machine
I would show some before pictures, but there isn't any. This machine from put together from parts that I've accumulated from doing other machines.
The frame comes from one machine, the shooter tray from another and the playfield pieces/center feature was put together from several different machines. The rear plastics also from several different machines.
The playfield graphic is from a calendar I found at Goodwill, ($4.99). It was a 2012 calendar that has 12 different 16" X 22" abstract prints. Then I cover the print with a sheet of 5m Dura-Lar. With the prints costing about .40 cents each and Dura-Lar about $5.00, it made for a really low cost playfield replacement.
The lighting is all LED and runs off a 12VDC transformer.
trio3.jpg trio4.jpg
trio5.jpg trio2.jpg
trio8.jpg trio9.jpg
Reply With Quote
