Japanese Slot Machine called. Thunder

[Kgrandpop]

I am a grandfather and have a Japanese slot machine that my grads kids play when ever they visit. The last time they used the machine they pulled out the coin hopper to get coins. I had to put it back in and now the hopper will not work. There’s a cable they detached but I have looked all over the machine but can’t find where it fits. It’s only a 2 wire cable with a male type plug end.

hope someone can assist so the grandkids can have fun again. Many thanks

[Moparformances]

pics would help

and of course

Welcome to Pachitalk

[Peteybob]

Hello Kgrandpop and welcome to the group

Yes some pictures would be most helpful if able until someone with a Thunder machine comes along. Some hoppers plug into the side of the power supply and some to the top side. Pictures of the hopper and power supply area would help for now.

[Peteybob]

Some pictures uploaded for Kgrandpop's Thunder pachislo

image0.jpegimage1.jpegimage2.jpeg

[Peteybob]

I have a similar machine on the inside. Mine has two 2 wire connections on the underside of the hopper. Could this be where your wire goes?

20210214_143939.jpg

[Peteybob]

(I have posted this on behalf of Kgrandpop who is having trouble posting his pictures. Any thought as to what this wire set is for and where it connects?
Looks like an add-on item to me but my Arex may be different from the Thunder machine setup.
Pete)

From Kgrandpop :
I have attached 3 pictures of the underside of the coin hopper. The wire harness is the green and yellow wires that I don’t know where they plug into. With the type of connector on the yellow and green cable it should fit into another cable with a different end, but I do not see one.

Thanks again for your help.

hopper1.jpghopper2.jpghopper3.jpg