Pachislo gung gung coin hopper

[Jeffory Schiebel]

I created a big problem for myself. Four days ago I bought a Gung Gung machine. The machine was working great and I was having so much fun! I tried to change the odds on the machine, I had the door open, the coin hopper became unplugged. The plastic wire connectors did not become unplugged. The wires in the plug coming from the hopper pulled out of the connector. I have no idea which order the wires go. The wires in the plug coming from the machine are different colors than the wires coming from the hopper. It is a 7 pin connector. I was wondering if somebody has a similar machine maybe a photo could be posted. I am so mad at myself!

Thanks Jeffory Schiebel

[Marshall]

How about a picture of your snafu?

[Jeffory Schiebel]

I will do that now. Thanks for responding

[Moparformances]

I created a big problem for myself. Four days ago I bought a Gung Gung machine. The machine was working great and I was having so much fun! I tried to change the odds on the machine, I had the door open, the coin hopper became unplugged. The plastic wire connectors did not become unplugged. The wires in the plug coming from the hopper pulled out of the connector. I have no idea which order the wires go. The wires in the plug coming from the machine are different colors than the wires coming from the hopper. It is a 7 pin connector. I was wondering if somebody has a similar machine maybe a photo could be posted. I am so mad at myself!

Thanks Jeffory Schiebel

Welcome to Pachitalk

How about a picture of your snafu?

Welcome to Pachitalk

wow a double welcome..

pics please

[Jeffory Schiebel]

I need to change res of photos in adobe. My cells smallest res is 2.7 megs the site will not accept those. Thanks for helping me. I will post the pics later tonight

[Jeffory Schiebel]

I am sorry for the size of this photo. These are the wires that pulled out of the plug coming from the hopper

[Jeffory Schiebel]

I did post one pic. The admin has to approve it

[compirate]

Something went screwy with it so try it again please

[Jeffory Schiebel]

I will try

[callmike2]

That looks like a really fun machine. The info in the pachislo data base says it is a 2002 model made by DAITO. https://www.pachislodb.com/db-GUNG+GUNG.html

Maybe someone has a DAITO that is a Gung-Gung or similar model from 2002 and they can send you a picture of the hopper end of the connector plugged in. Good Luck!!!

[Jeffory Schiebel]

20210206_152252 resize.jpg

These are the wires coming from the hopper that became unplugged from the connector. I hope the res. is right I am having a heck of a time with this. Callmike2 that would be great if somebody could do that.

[takethecastle57]

[compirate]

Can you post a picture of what the hopper looks like? I've found some pictures, but not sure which one is like yours. and the connector if you can.

That and any make/model info for the hopper, if available.

[Jeffory Schiebel]

I will post some pics later. I am having some issues posting pics. Model # isCH-700A Serial# 10111000 DC-24 volts it also says 25 cents which I find interesting. It also says Asahi Seiko. The wires became unplugged from the plastic connector. There are 7 wires. It is a small plastic plug measuring @.25 of an inch thick and about an inch square

[callmike2]

Jeffory, there are so many different configurations of hoppers and wiring connections that it is almost impossible to imagine a combination of wire order that may work. If one knew where all of the wires go in both directions of the connector, you could figure it out with a multimeter. I've looked everywhere I could think of online trying to find a Daito machine hopper so I could look at the wiring connector. I'm not having much luck, but I really don't know exactly what I'm looking for. Keep digging and scratching your head. Surely someone has a Daito Gung Gung pachislo that would post a picture of the wiring connectors associated with the hopper. Don't give up. mb

[compirate]

A quick search found this, perhaps you could write to them and see. I know it's not the one you have, but they may be able to help.

Also the Japanese company, they might be able to help also.

[Jeffory Schiebel]

Thanks! I will try. 7x7= 49 different combinations for the wires to go into the plug?

[Drunkenclam]

if they were the odds. i'd play the lottery
Isn't the forumla 7 x 6 x 5 x 4 x 3 x 2 x1 = 5040 cominbations.

if your doing posts from a PC. i find the easist way to load the pictures into paint. then just click the resize button and reduce the size there. a 4Mb pic can be reduced quite easierly by reducing by 25% of course you can also crop out any background you do not need to reduce the file size as well.

[takethecastle57]

For the photos


Go to vga or the lowest resolution on your camera .

[callmike2]

Jeffory, I was curious about the post by Compirate. So I filed a request on their support line to see what they had. Of course, they don't sell the CH-700A any longer. But, their representative, Leroy, said they had a model hopper that may substitute. I told him I was more interested in the wiring and connectors and that one end of the connector was damaged and the wire order was a mystery. He sent a couple of pdfs. I'm going to try to figure out how to send them to you. maybe pm. I'll try that.