Results 1 to 8 of 8

Thread: Neo Planett token slot problem

  1. #1
    Blind Shooter crosschk's Avatar
    Join Date
    May 2005
    Location
    Mid-South PA
    Posts
    62
    Thanks
    0
    Thanks Received
    8

    Default Neo Planett token slot problem

    I notice when either speed loading or putting tokens in individually, the more then half of them miss the hopper and go all over the machine. I've found some in the wires.

    Is this normal for Neo Planett or should I look at something inside that may be causing this.

    The hopper was no where close to being full
    Machines I have** Umi Ichiban **Star Blazers ** Neo PlanetT ** Hakushon Daimaoh **
    Always willing to adopt new machines.
    Looking for a miracle **Spin Luck ** Tiger Mask **

  2. #2
    Sparky RKnarr01's Avatar
    Join Date
    Nov 2004
    Location
    Rochester, NY
    Posts
    3,888
    Thanks
    50
    Thanks Received
    410

    Default Re: Neo Planett token slot problem

    mine does not do this, i'd check the coin track

  3. #3
    Eye Shooter cmk8895's Avatar
    Join Date
    Jun 2005
    Location
    Milwaukee, WI
    Posts
    544
    Thanks
    1
    Thanks Received
    73

    Default Re: Neo Planett token slot problem

    I had this exact same problem with a Continental XXXX. They were all over the inside of the machine!

    What I did was this: Take out the coin chute (if you have one). This is the little track BESIDE the coin acceptor. Clean it. A LOT.

    Take out the coin acceptor mechanism and take apart as much as you feel comfortable doing. Clean the living bejesus out of it.

    Take out the coin acceptor slot and clean it, or leave it in and use a nail file to LIGHTLY sand the inside.

    After all this be sure all the dust is gone and put it all back together. You'll be left with a very clean coin path and the tokens will get up the proper speed to shoot right into the hopper.

    cmk
    7 Pachislos, 1 vintage Pachinko; ask about 'em.

  4. #4
    Pachi Puro slothappy144's Avatar
    Join Date
    Jul 2006
    Location
    Grattan, Mi
    Posts
    3,175
    Thanks
    1,890
    Thanks Received
    2,256

    Default Re: Neo Planett token slot problem

    Nine does (did) same thing, it is suposed to go into the overflow bin, Don't have one? then do what me and lucky dog did, put tape over the ramp to the overflow bin. No problems after that!

  5. #5
    Fever Hunter bearngg00se's Avatar
    Join Date
    Jan 2006
    Location
    North of 50, Nord du Quebec
    Posts
    185
    Thanks
    69
    Thanks Received
    288

    Default Re: Neo Planett token slot problem

    Quote Originally Posted by crosschk
    I notice when either speed loading or putting tokens in individually, the more then half of them miss the hopper and go all over the machine. I've found some in the wires.

    Is this normal for Neo Planett or should I look at something inside that may be causing this.
    Not sure if it's normal or not - mine doesn't do that
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    I'm not a complete idiot
    - some parts are missing
    *Thunder VII**Azteca Legends**NeoPlanetT

  6. #6
    Eye Shooter Frank A's Avatar
    Join Date
    Dec 2004
    Location
    Lower Delaware
    Posts
    525
    Thanks
    6
    Thanks Received
    761

    Smile Re: Neo Planett token slot problem

    There is a chrome bracket that may be missing at the right front part of the hopper. Duct tape and cardboard should do as a quick fix or you can order the bracket from Milt.
    Frank A
    Lower Delaware

  7. #7
    Sandwich Shooter chaz70's Avatar
    Join Date
    Sep 2005
    Location
    Central New Jersey
    Posts
    382
    Thanks
    113
    Thanks Received
    122

    Default Re: Neo Planett token slot problem

    My Neo Magic Pulsar (almost same machine) was sending about a third of its coins to the overflow bin and not the hopper. After I cleaned the coin track really good they all seem to be making it to the hopper now.

    I think now that the track is clean the coins travel faster and fly off the ramp into the hopper the way they should.

    (Ask Mark if you don't believe me.)

  8. #8
    Pachi Puro scooby_doo_m2002's Avatar
    Join Date
    Mar 2005
    Location
    Loogootee, Indiana
    Posts
    2,455
    Thanks
    1,182
    Thanks Received
    647

    Default Re: Neo Planett token slot problem

    I don't have a neo planett but on one machine it has like chrome piece that sticks out from the coin track. on another I had the same problem as you have, so I took a piece of metal, bent and painted it chrome and hook it to the coin track and no more problems... just my 2 tokens worth.

Similar Threads

  1. Token slot machine
    By Sid in forum Pachislo Listings / Ebay RSS feed
    Replies: 0
    Last Post: 12-26-2008, 10:46 AM
  2. Problem with Slot Pachinko.com
    By rollercoaster79 in forum Vendors & Manufacturers Pachinko
    Replies: 55
    Last Post: 07-27-2007, 08:36 AM
  3. How Can I Solve This Problem? Token acceptor
    By goober in forum Pachislo Technical Support Tickets
    Replies: 17
    Last Post: 01-31-2007, 02:55 AM
  4. Azteca Gold Token Problem
    By lindowman146 in forum Pachislo Modifications
    Replies: 3
    Last Post: 10-17-2006, 04:34 PM
  5. Universal "Versus" token hopper problem
    By Starchaser in forum Pachislo Modifications
    Replies: 15
    Last Post: 08-09-2005, 02:48 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •