Newbie- What is wrong with my machine

[barnold]

I’ll look again tonight. We’re you able to buy a new coil in your instance, and where were you able to find it? Thanks

[grizzlypower2001]

I had a solder joint issue on the circuit board, resoldered connection and was good. Ebay has been a great source for parts and local market places for part machines

Sent from my SM-G975U using Tapatalk

[barnold]

So I was so focused on the CN10 that I didn’t check the CN9. No power getting there. When I unplugged the CN9 wires, got a loud noise and an E1 error on the front.

[barnold]

I’ve found some other threads and videos of an E1 error to reset the machine, but they all had a key for the interior needed to reset. Not only do I not have a key with this machine, there is no key slot on the interior. Wondering if there is another way for my type of machine, just can’t figure it out.

Not sure if the error is because I unplugged; or because it’s the cause of my issue

Here is another photo
https://imgur.com/a/dxICVFh

[MrGneiss]

A lot of times people change the keyed switch to a regular on/off switch when they lose the key..So yours may have that mod!!

[barnold]

Right, here's my power setup. Is there a different way to reset the power going there other than the obvious on/off?

https://imgur.com/a/FYOL6iY
https://imgur.com/a/aofIqlk

[Moparformances]

Right, here's my power setup. Is there a different way to reset the power going there other than the obvious on/off?

https://imgur.com/a/FYOL6iY
https://imgur.com/a/aofIqlk

pics dont work for me.. can you post pics in the thread please

[barnold]

I'm not sure if it's my permissions, but I receive upload errors anytime I try to post a picture in the thread (or if I try to bring it in to the thread from a link)

I just uploaded the imgur photos again and made them public. If they still don't work, I'll just move on from the machine. Appreciate everyone's attempts to help my ineptitude, apologies for all the back and forth.

[Peteybob]

pics dont work for me.. can you post pics in the thread please

Right, here's my power setup. Is there a different way to reset the power going there other than the obvious on/off?

https://imgur.com/a/FYOL6iY
https://imgur.com/a/aofIqlk

desktop2.jpg
desktop3.jpg

Typically there is only one power switch to the machine. The bottom switch in pic#2 looks to be for resetting the odds and machine. The tiny button next to that may be used to choose the odds numbers 1-6. The upper pic looks like wiring to the hopper? I assume such being that the two slide switches have to do with reset/play after a jackpot.

[barnold]

For the bottom pic:
The bottom On/Off handles power to to token slot. When I turn off, the machine goes from flashing “insert token” to showing Win 5. Doesn’t bypass tokens or let me play, however. The small button I also assumed was for odds, but doesn’t display anything when pressing so not confident if it’s doing anything or not.
For the top pic:
I’ve slid both to test out, and can’t find anything to decipher what they mean/do

[Peteybob]

For the bottom pic:
The bottom On/Off handles power to to token slot. When I turn off, the machine goes from flashing “insert token” to showing Win 5. Doesn’t bypass tokens or let me play, however. The small button I also assumed was for odds, but doesn’t display anything when pressing so not confident if it’s doing anything or not.
For the top pic:
I’ve slid both to test out, and can’t find anything to decipher what they mean/do

Take a look at this link. You need to follow the steps exactly. Your bottom rocker switch would be turned on with the power off. The tiny button next to it should be for the odds selection. You might also have a button on the inside of the door for this process.
https://www.pachitalk.com/forums/sho...ighlight=reset

[barnold]

Thanks everyone. I can get it into odds setting mode; but to do so it’s actually the opposite, i turn the bottom rocker to off instead of on. Problem is, when I do that and turn back on to get out of odds setting mode, the token credit register CN10 decompresses so it won’t read anything. I’m gonna move on at this point but appreciate everyone’s help