Results 1 to 12 of 12

Thread: Jet set pachislo issue

  1. #1
    Blind Shooter wes1777's Avatar
    Join Date
    Jun 2020
    Location
    MS
    Posts
    35
    Thanks
    12
    Thanks Received
    11

    Default Jet set pachislo issue

    Hi, all! I am still having issue with my JET SET Pachislo. I had to buy a new coin mechanism (mine was missing the plastic spring that sends the coin to the hopper). Ever since I got this machine, it will not register tokens. It shows 00 after I place three tokens in. I will pull down the knob (reels spin). Then, I try to stop the spins (check inside and the lights lit up for each stop button). What is going on? I reset it three times and still nothing. NO ERROR CODES!!!!! Any advice?? Thank you all!!!!!!!!

  2. #2
    Tokie Owens fastpcuser's Avatar
    Join Date
    Mar 2020
    Location
    Sarasota, FL
    Posts
    29
    Thanks
    0
    Thanks Received
    18

    Default Re: Jet set pachislo issue

    Possibly bad relays that stop the stepper motors ?

    Picture of the board ?


    Sent from my iPhone using Tapatalk

  3. The following user says "Thanks" to fastpcuser


  4. #3
    Blind Shooter wes1777's Avatar
    Join Date
    Jun 2020
    Location
    MS
    Posts
    35
    Thanks
    12
    Thanks Received
    11

    Default Re: Jet set pachislo issue

    Attached are my photos. Looks like the red lights are out on reels. How do you change those parts?
    Attached Images Attached Images

  5. #4
    Blind Shooter wes1777's Avatar
    Join Date
    Jun 2020
    Location
    MS
    Posts
    35
    Thanks
    12
    Thanks Received
    11

    Default Re: Jet set pachislo issue

    One of the reels is dragging (far right).

  6. #5
    Blind Shooter wes1777's Avatar
    Join Date
    Jun 2020
    Location
    MS
    Posts
    35
    Thanks
    12
    Thanks Received
    11

    Default Re: Jet set pachislo issue

    The right reel is dragging. See photo. Are they out of line , perhaps. It is crediting up now but reels keep spinning. I push buttons and still spinning.
    Attached Images Attached Images

  7. #6
    I was thrown out of Top Gear Drunkenclam's Avatar
    Join Date
    May 2010
    Location
    Guildford, Surrey
    Posts
    25,184
    Thanks
    11,873
    Thanks Received
    16,121

    Default Re: Jet set pachislo issue

    If any other signal is active. It will ignore the stop buttons being pressed. Sort of like old keyboards that could only play one note at a time.
    Ian #UKPachinko

  8. The following user says "Thanks" to Drunkenclam


  9. #7
    Blind Shooter wes1777's Avatar
    Join Date
    Jun 2020
    Location
    MS
    Posts
    35
    Thanks
    12
    Thanks Received
    11

    Default Re: Jet set pachislo issue

    What do you mean by other signal. Not sure?

  10. #8
    Tokie Owens fastpcuser's Avatar
    Join Date
    Mar 2020
    Location
    Sarasota, FL
    Posts
    29
    Thanks
    0
    Thanks Received
    18

    Default Re: Jet set pachislo issue

    If something else is pressed ie: one of your stop buttons is pressed or showing pressed nothing else will work until you release it.


    Sent from my iPhone using Tapatalk

  11. The following user says "Thanks" to fastpcuser


  12. #9
    I was thrown out of Top Gear Drunkenclam's Avatar
    Join Date
    May 2010
    Location
    Guildford, Surrey
    Posts
    25,184
    Thanks
    11,873
    Thanks Received
    16,121

    Default Re: Jet set pachislo issue

    Basically anything. Stop lever is the common one for sticking or it could be a duff reel stop board.
    (If yours has one)
    Ian #UKPachinko

  13. The following user says "Thanks" to Drunkenclam


  14. #10
    Blind Shooter wes1777's Avatar
    Join Date
    Jun 2020
    Location
    MS
    Posts
    35
    Thanks
    12
    Thanks Received
    11

    Default Re: Jet set pachislo issue

    My rightreel sensor was not attached. It makes a grinding sound. It spinning nonstop. It will not stop. Check buttons. Function properly. I bought a new reel stop board. Maybe, it will work.

  15. #11
    Blind Shooter wes1777's Avatar
    Join Date
    Jun 2020
    Location
    MS
    Posts
    35
    Thanks
    12
    Thanks Received
    11

    Default Re: Jet set pachislo issue

    Does anyone have the reel cage boards for JET SET RADIO PACHISLO? I am trying to find them just in case the stop reel board is no the issue but the boards on top of reels. Thanks for replying!!!!!!!!!!

  16. #12
    I was thrown out of Top Gear Drunkenclam's Avatar
    Join Date
    May 2010
    Location
    Guildford, Surrey
    Posts
    25,184
    Thanks
    11,873
    Thanks Received
    16,121

    Default Re: Jet set pachislo issue

    if you reel sensor is not attached. Then the machine will never know where its zero position is. So it will not know what symbol is being displayed. First fix the sensor.
    Ian #UKPachinko

Similar Threads

  1. Jet set pachislo issue
    By wes1777 in forum Pachislo Technical Support Tickets
    Replies: 4
    Last Post: 08-09-2020, 05:22 AM
  2. Jokers Wild Pachislo issue
    By doa12 in forum Pachislo Technical Support Tickets
    Replies: 7
    Last Post: 05-14-2019, 08:19 PM
  3. Another Matrix issue help needed please screen graphic glitch issue
    By ryantiger99 in forum Pachinko Technical Support Tickets
    Replies: 38
    Last Post: 01-11-2014, 10:37 AM
  4. Seven Jack Pachislo Hopper issue
    By bmh1990 in forum Pachislo Technical Support Tickets
    Replies: 3
    Last Post: 11-14-2013, 03:33 PM
  5. Issue with a pachislo machine. Please Help
    By michael382 in forum Pachislo Technical Support Tickets
    Replies: 2
    Last Post: 09-26-2012, 02:15 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •