[Help] Tried to reset odds now stuck and unable to play

[Drunkenclam]

Ok. All the wires that come out of the socket on the little board go to the buttons on the front by that side.

here is a list of ths LEDs and their function.

1) Odds Button (white under flap)
2) Dipswitch on door for auto payout after bonus/attendant reset after bonus
3) Dipswitch on door for auto payout after bonus/attendant reset after bonus
4) Cash out button (little button to the left of the spin lever)
5) Door soft reset switch (activated by turning the door key to the left)
6) Token Acceptor photocell (in token acceptor)
7) Token Acceptor photocell (in token acceptor)
8) 1 bet Button
9) 2 bet Button
10) Max bet Button
11) Spin Lever
12) Lh reel stop Button
13) Mid reel stop Button
14) Rh reel stop Button
15) Odds/Play key switch
16) Hopper payout sensor
17) Overflow hopper full sensor (2 metal prongs in the bottom RH corner)

Mine will perform a reset even if the door open sensor has been fooled into thinking the door is shut.
I also noted that on mine. Whilst performing the operation, I only have the one LED until I press something (odds button, Spin lever). in your video there are 3 leds lit. Although if its 2 and 3 thats not important. But it will give a smoother play if you change the dip switches, otherwise it will require a soft reset with the door key after each bonus.

I would check yours to ensure all is functioning or not functioning due to the credit add board against the LEDs as listed above.
it might be worth just removing that board and returning wiring to stock until all working.