Results 1 to 12 of 12

Thread: Does anyone need replacement parts

  1. #1
    Fever Hunter Vikingwiz's Avatar
    Join Date
    Jul 2018
    Location
    Michigan
    Posts
    208
    Thanks
    195
    Thanks Received
    395

    Default Does anyone need replacement parts

    Assembling our next order as Japan is back up and running and we're ordering a handful of replacement parts and frames. I thought I'd see if anyone needs anything as I've had a couple requests for EVOL frames and I need a bunch of random things myself.

    Kindly let me know by 6/5.

    Note: Games newer than 2012 usually available and reasonability priced, specifically frames. Game-specific parts are usually a bit more difficult to come by unless you buy the whole game cell.

  2. The following 5 users say "Thanks" to Vikingwiz


  3. #2
    Eye Shooter cait001's Avatar
    Join Date
    Jun 2018
    Location
    Ontario
    Posts
    722
    Thanks
    410
    Thanks Received
    855

    Default Re: Does anyone need replacement parts

    what about one of those pachinko nail-adjuster kits, and those metal tools with pachinko balls on the end so you can check size gaps?
    WANTED: 10¥ games, pre-1950s machines, スマートボール (Smart Ball), payazzo/kronespill, Pickwick-style (~1905)
    if you have any of these in North America, let's talk.

  4. The following user says "Thanks" to cait001


  5. #3
    Pachi Puro lotsoballs's Avatar
    Join Date
    Nov 2014
    Location
    Charlotte NC
    Posts
    2,129
    Thanks
    1,494
    Thanks Received
    4,050

    Default Re: Does anyone need replacement parts

    I need replacement glass for a Sankyo Fortune frame; I accidentally cracked my inner glass swapping Lady Gaga into Macross 2. That is if isn’t too expensive.

    Otherwise I need to start asking around local glass/framing experts; I’m not sure if they can repair it properly.

  6. The following user says "Thanks" to lotsoballs


  7. #4
    Fever Hunter Vikingwiz's Avatar
    Join Date
    Jul 2018
    Location
    Michigan
    Posts
    208
    Thanks
    195
    Thanks Received
    395

    Default Does anyone need replacement parts

    [mention]cait001 [/mention] we have 3 of these in-stock on our site under accessories.

    [mention]lotsoballs [/mention] do you want the Lady Gaga insert, fortune glass or both? Pic below. It costs us about 70 dollars to have the glass replaced locally. They’ve done great work, but it takes 2 weeks. By the time shipping is added in from us, it’s probably gonna be similar in same price. It may be cheaper to get you a complete frame.


    Sent from my iPhone using Tapatalk

  8. The following 2 users say "Thanks" to Vikingwiz


  9. #5
    Pachi Puro lotsoballs's Avatar
    Join Date
    Nov 2014
    Location
    Charlotte NC
    Posts
    2,129
    Thanks
    1,494
    Thanks Received
    4,050

    Default Re: Does anyone need replacement parts

    Quote Originally Posted by Vikingwiz View Post
    [mention]cait001 [/mention] we have 3 of these in-stock on our site under accessories.

    [mention]lotsoballs [/mention] do you want the Lady Gaga insert, fortune glass or both? Pic below. It costs us about 70 dollars to have the glass replaced locally. They’ve done great work, but it takes 2 weeks. By the time shipping is added in from us, it’s probably gonna be similar in same price. It may be cheaper to get you a complete frame.


    Sent from my iPhone using Tapatalk
    Ok, I definitely would like to order the glass then. I’ll take a Lady Gaga insert/visor thing too if you can can get one reasonably priced. (Is it easy to remove as I swap cells fairly frequently?)


    Not sure if Lady Gaga specific Fortune frame glass is different size than a “regular” Fortune frame glass like mine is though; I had to cut off a small plastic “cube” on the cell as it pokes out and put enough pressure on the glass to crack it when I closed it. So it’s very possible Lady Gaga’s glass is slightly smaller and differently shaped to accommodate that insert.

  10. The following user says "Thanks" to lotsoballs


  11. #6
    Tokie Owens akito starwind's Avatar
    Join Date
    Mar 2016
    Location
    North california
    Posts
    15
    Thanks
    1
    Thanks Received
    21

    Default Re: Does anyone need replacement parts

    I need a lock with key for a, I believe v frame. "Lord of the rings"
    Are ball purchases cheaper?

  12. #7
    Fever Hunter Vikingwiz's Avatar
    Join Date
    Jul 2018
    Location
    Michigan
    Posts
    208
    Thanks
    195
    Thanks Received
    395

    Default Re: Does anyone need replacement parts

    I swapped resident evil and lady Gaga. The glass is slightly smaller on Gaga, but dimensionally the same. there’s a plastic notch used to pull air to cool the projector that’s getting in the way from it closing.

    When I put regular Fortune glass into Lady Gaga, it’s getting in the upper left hand corner. It’s hard to tell exactly what it is, but it’s slightly off to where this doesn’t close. Doors are identical on both. Guessing cell clearance is slightly incompatible.

    I ran into a similar issue trying to cell swap Dynamite King from Okinawa with Oshio and Tora. That one, the frame was actually the problem. The cell had a notch slightly above where it was on the other game, which also is in a different spot on the actual frame.

    Heiwa is pretty good about cell swaps. Unless you try and put Rio Rainbow into a Tokio Premium Amtex frame. It powers up and works...but balls don’t route properly and clog up quickly.


    Sent from my iPhone using Tapatalk

  13. #8
    Fever Hunter Vikingwiz's Avatar
    Join Date
    Jul 2018
    Location
    Michigan
    Posts
    208
    Thanks
    195
    Thanks Received
    395

    Default Re: Does anyone need replacement parts

    On ball prices, it must be bought in quantity of over 1m to really do anything to the price. We have 100k balls in stock which are a mix of shiny & engraved (and tons of tokens too), depending on the quantity you're looking for- happy to work on price with you. Clover Collectable prices are very reasonable for balls too.

  14. #9
    Pachi Puro lotsoballs's Avatar
    Join Date
    Nov 2014
    Location
    Charlotte NC
    Posts
    2,129
    Thanks
    1,494
    Thanks Received
    4,050

    Default Re: Does anyone need replacement parts

    Quote Originally Posted by Vikingwiz View Post
    I swapped resident evil and lady Gaga. The glass is slightly smaller on Gaga, but dimensionally the same. there’s a plastic notch used to pull air to cool the projector that’s getting in the way from it closing.

    When I put regular Fortune glass into Lady Gaga, it’s getting in the upper left hand corner. It’s hard to tell exactly what it is, but it’s slightly off to where this doesn’t close. Doors are identical on both. Guessing cell clearance is slightly incompatible.

    I ran into a similar issue trying to cell swap Dynamite King from Okinawa with Oshio and Tora. That one, the frame was actually the problem. The cell had a notch slightly above where it was on the other game, which also is in a different spot on the actual frame.

    Heiwa is pretty good about cell swaps. Unless you try and put Rio Rainbow into a Tokio Premium Amtex frame. It powers up and works...but balls don’t route properly and clog up quickly.


    Sent from my iPhone using Tapatalk
    Yeah, here’s a thread with pics of that plastic thing I had to modify (cut off) of the cell to make it fit in a regular Fortune frame: https://www.pachitalk.com/forums/sho...ication-needed

    So with that in mind; I think I just want to order a regular Fortune frame replacement glass if possible (since not sure if that Gaga insert is going to be compatible with a non-Gaga specific frame/glass.

  15. The following user says "Thanks" to lotsoballs


  16. #10
    Pachi Puro lotsoballs's Avatar
    Join Date
    Nov 2014
    Location
    Charlotte NC
    Posts
    2,129
    Thanks
    1,494
    Thanks Received
    4,050

    Default Re: Does anyone need replacement parts

    Thanks for the replacement glass!

    No more unsightly cracks to see when playing Gaga/Golgo drum/Bunny&Bunny/Macross 2/Symphogear!!!


  17. The following 5 users say "Thanks" to lotsoballs


  18. #11
    Fever Hunter Vikingwiz's Avatar
    Join Date
    Jul 2018
    Location
    Michigan
    Posts
    208
    Thanks
    195
    Thanks Received
    395

    Default Re: Does anyone need replacement parts

    No problem! Glad to hear it arrived safely!
    We've amassed a stockpile of modern frame parts should others be in need

  19. The following user says "Thanks" to Vikingwiz


  20. #12
    Tokie Owens traxsi's Avatar
    Join Date
    Nov 2020
    Location
    Ont
    Posts
    3
    Thanks
    0
    Thanks Received
    1

    Default Re: Does anyone need replacement parts

    hello there
    Looking for a replacement motor for a kicker
    Please see pic20201101_102938_resized_2 (1).jpg

Similar Threads

  1. Pachislo replacement parts
    By BadWolfCasino in forum Pachislo Technical Support Tickets
    Replies: 8
    Last Post: 01-01-2017, 11:00 AM
  2. Replies: 4
    Last Post: 10-27-2015, 08:58 PM
  3. Making replacement parts
    By Bobesmo in forum Vintage Pachinko
    Replies: 27
    Last Post: 11-28-2010, 02:05 AM
  4. I need Replacement Parts
    By sd38_2 in forum Pachinko Technical Support Tickets
    Replies: 4
    Last Post: 08-22-2009, 10:56 AM
  5. Pachinko Replacement Parts
    By The Ricker in forum Vendors & Manufacturers Pachinko
    Replies: 3
    Last Post: 11-02-2007, 01:55 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •