Results 1 to 12 of 12

Thread: Does anyone need replacement parts

  1. #1
    Fever Hunter Vikingwiz's Avatar
    Join Date
    Jul 2018
    Location
    Michigan
    Posts
    184
    Thanks
    165
    Thanks Received
    327

    Default Does anyone need replacement parts

    Assembling our next order as Japan is back up and running and we're ordering a handful of replacement parts and frames. I thought I'd see if anyone needs anything as I've had a couple requests for EVOL frames and I need a bunch of random things myself.

    Kindly let me know by 6/5.

    Note: Games newer than 2012 usually available and reasonability priced, specifically frames. Game-specific parts are usually a bit more difficult to come by unless you buy the whole game cell.

  2. The following 5 users say "Thanks" to Vikingwiz


  3. #2
    Sandwich Shooter cait001's Avatar
    Join Date
    Jun 2018
    Location
    Ontario
    Posts
    494
    Thanks
    211
    Thanks Received
    528

    Default Re: Does anyone need replacement parts

    what about one of those pachinko nail-adjuster kits, and those metal tools with pachinko balls on the end so you can check size gaps?
    WANTED: pre-1950s Japanese machines, スマートボール (Smart Ball), payazzo/kronespill, European vertical games (1890-1970s)
    if you have any of these in North America, let's talk.

  4. The following user says "Thanks" to cait001


  5. #3
    Kungishi lotsoballs's Avatar
    Join Date
    Nov 2014
    Location
    Charlotte NC
    Posts
    1,056
    Thanks
    767
    Thanks Received
    2,020

    Default Re: Does anyone need replacement parts

    I need replacement glass for a Sankyo Fortune frame; I accidentally cracked my inner glass swapping Lady Gaga into Macross 2. That is if isnít too expensive.

    Otherwise I need to start asking around local glass/framing experts; Iím not sure if they can repair it properly.

  6. The following user says "Thanks" to lotsoballs


  7. #4
    Fever Hunter Vikingwiz's Avatar
    Join Date
    Jul 2018
    Location
    Michigan
    Posts
    184
    Thanks
    165
    Thanks Received
    327

    Default Does anyone need replacement parts

    [mention]cait001 [/mention] we have 3 of these in-stock on our site under accessories.

    [mention]lotsoballs [/mention] do you want the Lady Gaga insert, fortune glass or both? Pic below. It costs us about 70 dollars to have the glass replaced locally. Theyíve done great work, but it takes 2 weeks. By the time shipping is added in from us, itís probably gonna be similar in same price. It may be cheaper to get you a complete frame.


    Sent from my iPhone using Tapatalk

  8. The following 2 users say "Thanks" to Vikingwiz


  9. #5
    Kungishi lotsoballs's Avatar
    Join Date
    Nov 2014
    Location
    Charlotte NC
    Posts
    1,056
    Thanks
    767
    Thanks Received
    2,020

    Default Re: Does anyone need replacement parts

    Quote Originally Posted by Vikingwiz View Post
    [mention]cait001 [/mention] we have 3 of these in-stock on our site under accessories.

    [mention]lotsoballs [/mention] do you want the Lady Gaga insert, fortune glass or both? Pic below. It costs us about 70 dollars to have the glass replaced locally. Theyíve done great work, but it takes 2 weeks. By the time shipping is added in from us, itís probably gonna be similar in same price. It may be cheaper to get you a complete frame.


    Sent from my iPhone using Tapatalk
    Ok, I definitely would like to order the glass then. Iíll take a Lady Gaga insert/visor thing too if you can can get one reasonably priced. (Is it easy to remove as I swap cells fairly frequently?)


    Not sure if Lady Gaga specific Fortune frame glass is different size than a ďregularĒ Fortune frame glass like mine is though; I had to cut off a small plastic ďcubeĒ on the cell as it pokes out and put enough pressure on the glass to crack it when I closed it. So itís very possible Lady Gagaís glass is slightly smaller and differently shaped to accommodate that insert.

  10. The following user says "Thanks" to lotsoballs


  11. #6
    Tokie Owens akito starwind's Avatar
    Join Date
    Mar 2016
    Location
    North california
    Posts
    15
    Thanks
    1
    Thanks Received
    21

    Default Re: Does anyone need replacement parts

    I need a lock with key for a, I believe v frame. "Lord of the rings"
    Are ball purchases cheaper?

  12. #7
    Fever Hunter Vikingwiz's Avatar
    Join Date
    Jul 2018
    Location
    Michigan
    Posts
    184
    Thanks
    165
    Thanks Received
    327

    Default Re: Does anyone need replacement parts

    I swapped resident evil and lady Gaga. The glass is slightly smaller on Gaga, but dimensionally the same. thereís a plastic notch used to pull air to cool the projector thatís getting in the way from it closing.

    When I put regular Fortune glass into Lady Gaga, itís getting in the upper left hand corner. Itís hard to tell exactly what it is, but itís slightly off to where this doesnít close. Doors are identical on both. Guessing cell clearance is slightly incompatible.

    I ran into a similar issue trying to cell swap Dynamite King from Okinawa with Oshio and Tora. That one, the frame was actually the problem. The cell had a notch slightly above where it was on the other game, which also is in a different spot on the actual frame.

    Heiwa is pretty good about cell swaps. Unless you try and put Rio Rainbow into a Tokio Premium Amtex frame. It powers up and works...but balls donít route properly and clog up quickly.


    Sent from my iPhone using Tapatalk

  13. #8
    Fever Hunter Vikingwiz's Avatar
    Join Date
    Jul 2018
    Location
    Michigan
    Posts
    184
    Thanks
    165
    Thanks Received
    327

    Default Re: Does anyone need replacement parts

    On ball prices, it must be bought in quantity of over 1m to really do anything to the price. We have 100k balls in stock which are a mix of shiny & engraved (and tons of tokens too), depending on the quantity you're looking for- happy to work on price with you. Clover Collectable prices are very reasonable for balls too.

  14. #9
    Kungishi lotsoballs's Avatar
    Join Date
    Nov 2014
    Location
    Charlotte NC
    Posts
    1,056
    Thanks
    767
    Thanks Received
    2,020

    Default Re: Does anyone need replacement parts

    Quote Originally Posted by Vikingwiz View Post
    I swapped resident evil and lady Gaga. The glass is slightly smaller on Gaga, but dimensionally the same. thereís a plastic notch used to pull air to cool the projector thatís getting in the way from it closing.

    When I put regular Fortune glass into Lady Gaga, itís getting in the upper left hand corner. Itís hard to tell exactly what it is, but itís slightly off to where this doesnít close. Doors are identical on both. Guessing cell clearance is slightly incompatible.

    I ran into a similar issue trying to cell swap Dynamite King from Okinawa with Oshio and Tora. That one, the frame was actually the problem. The cell had a notch slightly above where it was on the other game, which also is in a different spot on the actual frame.

    Heiwa is pretty good about cell swaps. Unless you try and put Rio Rainbow into a Tokio Premium Amtex frame. It powers up and works...but balls donít route properly and clog up quickly.


    Sent from my iPhone using Tapatalk
    Yeah, hereís a thread with pics of that plastic thing I had to modify (cut off) of the cell to make it fit in a regular Fortune frame: https://www.pachitalk.com/forums/sho...ication-needed

    So with that in mind; I think I just want to order a regular Fortune frame replacement glass if possible (since not sure if that Gaga insert is going to be compatible with a non-Gaga specific frame/glass.

  15. The following user says "Thanks" to lotsoballs


  16. #10
    Kungishi lotsoballs's Avatar
    Join Date
    Nov 2014
    Location
    Charlotte NC
    Posts
    1,056
    Thanks
    767
    Thanks Received
    2,020

    Default Re: Does anyone need replacement parts

    Thanks for the replacement glass!

    No more unsightly cracks to see when playing Gaga/Golgo drum/Bunny&Bunny/Macross 2/Symphogear!!!


  17. The following 5 users say "Thanks" to lotsoballs


  18. #11
    Fever Hunter Vikingwiz's Avatar
    Join Date
    Jul 2018
    Location
    Michigan
    Posts
    184
    Thanks
    165
    Thanks Received
    327

    Default Re: Does anyone need replacement parts

    No problem! Glad to hear it arrived safely!
    We've amassed a stockpile of modern frame parts should others be in need

  19. The following user says "Thanks" to Vikingwiz


  20. #12
    Tokie Owens traxsi's Avatar
    Join Date
    Nov 2020
    Location
    Ont
    Posts
    3
    Thanks
    0
    Thanks Received
    1

    Default Re: Does anyone need replacement parts

    hello there
    Looking for a replacement motor for a kicker
    Please see pic20201101_102938_resized_2 (1).jpg

Similar Threads

  1. Pachislo replacement parts
    By BadWolfCasino in forum Pachislo Technical Support Tickets
    Replies: 8
    Last Post: 01-01-2017, 11:00 AM
  2. Replies: 4
    Last Post: 10-27-2015, 08:58 PM
  3. Making replacement parts
    By Bobesmo in forum Vintage Pachinko
    Replies: 27
    Last Post: 11-28-2010, 02:05 AM
  4. I need Replacement Parts
    By sd38_2 in forum Pachinko Technical Support Tickets
    Replies: 4
    Last Post: 08-22-2009, 10:56 AM
  5. Pachinko Replacement Parts
    By The Ricker in forum Vendors & Manufacturers Pachinko
    Replies: 3
    Last Post: 11-02-2007, 01:55 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •